| Newsgroups |
gmane.comp.multimedia.gphoto.user |
| Message-ID |
<[email protected]> |
Hi,
i would like to be able to take some pictures through a DSLR command on
a raspberrry pi, and at the same time be able to use the live view of my
canon eos 600D but im having troubles.
I plugged the usb cable from my eos to the RPI, and programmed my
buttons with gphoto2, so i can take pictures, no problem.
I plugged the hdmi output on a simple screen, so i can see the liveview
output.
I can see the liveview, if i use the button to enable it on the camera,
but as soon as i take a picture, it goes back to menu mode.
If i try to enable the liveview from the RPI through the gphoto --shell
-> set-config veiwfinder=1 i can hear the camera doing something, but
the screen remains black, until the picture is taken, or until i set
config viewfinder=0, and then it goes back to menu mode.
Is there a way to go back to liveview between 2 pictures automatically ?
Thanks in advance for your help
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot