Re: No longer able to access samsung ST45
Marcus Meissner <[email protected]>
| Newsgroups | gmane.comp.multimedia.gphoto.user |
|---|---|
| Organization | SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 212 84 (AG Nürnberg) |
| Message-ID | <[email protected]> |
Hi,
it is getting detected, but seems it is not reacting to USB traffic.
Perhaps something else is using the device, like the GNOME GVFS.
You can check that with Nautilus.
Ciao, Marcus
On Thu, Nov 09, 2017 at 10:18:06PM +0100, Chris Dams wrote:
> Dear all,
>
> A few years ago I used to be able to access my samsung ST45 using shotwell.
> Nowadays I have a new computer on which I run archlinux and it no longer
> works.
>
> When I type 'gphoto2 --auto-detect' it says
>
> Model
> Port
> ----------------------------------------------------------
> USB PTP Class Camera usb:001,008
>
> When I type 'gphoto2 --list-files' it says
>
>
>
> *** Error ***
> PTP I/O Error
>
> *** Error ***
> An error occurred in the io-library ('I/O problem'): The supplied vendor or
> product id (0x0,0x0) is not valid.
> *** Error (-7: 'I/O problem') ***
>
> Below I also pasted the output of 'gphoto2 --list-files --debug'. Anyone
> any ideas?
>
> Many thanks,
> Chris Dams
>
>
>
>
> 0.000178 main (2): ALWAYS INCLUDE THE FOLLOWING
> LINES WHEN SENDING DEBUG MESSAGES TO THE MAILING LIST:
> 0.000218 main (2): gphoto2 2.5.14
> 0.000228 main (2): gphoto2 has been compiled with
> the following options:
> 0.000234 main (2): + gcc (C compiler used)
> 0.000238 main (2): + popt (mandatory, for handling
> command-line parameters)
> 0.000243 main (2): + exif (for displaying EXIF
> information)
> 0.000253 main (2): + no cdk (for accessing
> configuration options)
> 0.000264 main (2): + no aa (for displaying live
> previews)
> 0.000271 main (2): + jpeg (for displaying live
> previews in JPEG format)
> 0.000277 main (2): + readline (for easy navigation
> in the shell)
> 0.000293 main (2): libgphoto2 2.5.14.1
> 0.000303 main (2): libgphoto2 has been compiled with
> the following options:
> 0.000308 main (2): + all camlibs
> 0.000313 main (2): + gcc (C compiler used)
> 0.000317 main (2): + ltdl (for portable loading of
> camlibs)
> 0.000322 main (2): + EXIF (for special handling of
> EXIF files)
> 0.000329 main (2): libgphoto2_port 0.12.0
> 0.000338 main (2): libgphoto2_port has been compiled
> with the following options:
> 0.000347 main (2): + gcc (C compiler used)
> 0.000351 main (2): + ltdl (for portable loading of
> camlibs)
> 0.000357 main (2): + USB (libusb1, for USB cameras)
> 0.000364 main (2): + serial (for serial cameras)
> 0.000375 main (2): + no resmgr (serial port access
> and locking)
> 0.000382 main (2): + no ttylock (serial port
> locking)
> 0.000390 main (2): + no lockdev (serial port
> locking)
> 0.000398 main (2): CAMLIBS env var not set, using
> compile-time default instead
> 0.000404 main (2): IOLIBS env var not set, using
> compile-time default instead
> 0.000412 main (2): invoked with following arguments:
> 0.000421 main (2): --list-files
> 0.000429 main (2): --debug
> 0.000476 load_settings (2): Creating gphoto config directory
> ('/home/chrisd/.gphoto')
> 0.000557 load_settings (2): Loading settings from file
> '/home/chrisd/.gphoto/settings'.
> 0.000740 main (2): The user has not specified both a
> model and a port. Try to figure them out.
> 0.000760 gp_port_info_list_load (2): Using ltdl to load io-drivers
> from '/usr/lib/libgphoto2_port/0.12.0'...
> 0.000839 foreach_func (2): Called for filename
> '/usr/lib/libgphoto2_port/0.12.0/disk'.
> 0.001085 gp_port_library_list (2): found fstab fsname
> UUID=728906dd-b30e-4588-9905-f98d27e56e6c
> 0.001123 gp_port_library_list (2): found fstab fsname
> UUID=5fcfe195-1497-45d3-8e3f-660152385b9e
> 0.001253 gp_port_library_list (2): found mtab fsname proc
> 0.001266 gp_port_library_list (2): found mtab fsname sys
> 0.001275 gp_port_library_list (2): found mtab fsname dev
> 0.001297 gp_port_library_list (2): found mtab fsname run
> 0.001317 gp_port_library_list (2): found mtab fsname /dev/sda1
> 0.001335 gp_port_library_list (2): found mtab fsname securityfs
> 0.001348 gp_port_library_list (2): found mtab fsname tmpfs
> 0.001367 gp_port_library_list (2): found mtab fsname devpts
> 0.001379 gp_port_library_list (2): found mtab fsname tmpfs
> 0.001405 gp_port_library_list (2): found mtab fsname cgroup
> 0.001414 gp_port_library_list (2): found mtab fsname cgroup
> 0.001421 gp_port_library_list (2): found mtab fsname pstore
> 0.001440 gp_port_library_list (2): found mtab fsname cgroup
> 0.001449 gp_port_library_list (2): found mtab fsname cgroup
> 0.001513 gp_port_library_list (2): found mtab fsname cgroup
> 0.001522 gp_port_library_list (2): found mtab fsname cgroup
> 0.001531 gp_port_library_list (2): found mtab fsname cgroup
> 0.001540 gp_port_library_list (2): found mtab fsname cgroup
> 0.001549 gp_port_library_list (2): found mtab fsname cgroup
> 0.001559 gp_port_library_list (2): found mtab fsname cgroup
> 0.001567 gp_port_library_list (2): found mtab fsname cgroup
> 0.001577 gp_port_library_list (2): found mtab fsname systemd-1
> 0.001586 gp_port_library_list (2): found mtab fsname debugfs
> 0.001608 gp_port_library_list (2): found mtab fsname hugetlbfs
> 0.001630 gp_port_library_list (2): found mtab fsname configfs
> 0.001654 gp_port_library_list (2): found mtab fsname mqueue
> 0.001664 gp_port_library_list (2): found mtab fsname tmpfs
> 0.001682 gp_port_library_list (2): found mtab fsname tmpfs
> 0.001703 gp_port_library_list (2): found mtab fsname fusectl
> 0.001766 foreach_func (2): Loaded '' ('^disk:') from
> '/usr/lib/libgphoto2_port/0.12.0/disk'.
> 0.001777 foreach_func (2): Called for filename
> '/usr/lib/libgphoto2_port/0.12.0/ptpip'.
> 0.002003 foreach_func (2): Loaded 'PTP/IP Connection'
> ('ptpip:') from '/usr/lib/libgphoto2_port/0.12.0/ptpip'.
> 0.002018 foreach_func (2): Loaded '' ('^ptpip:') from
> '/usr/lib/libgphoto2_port/0.12.0/ptpip'.
> 0.002026 foreach_func (2): Called for filename
> '/usr/lib/libgphoto2_port/0.12.0/serial'.
> 0.002330 foreach_func (2): Loaded 'Serial Port 0'
> ('serial:/dev/ttyS0') from '/usr/lib/libgphoto2_port/0.12.0/serial'.
> 0.002345 foreach_func (2): Loaded 'Serial Port 1'
> ('serial:/dev/ttyS1') from '/usr/lib/libgphoto2_port/0.12.0/serial'.
> 0.002354 foreach_func (2): Loaded 'Serial Port 2'
> ('serial:/dev/ttyS2') from '/usr/lib/libgphoto2_port/0.12.0/serial'.
> 0.002364 foreach_func (2): Loaded 'Serial Port 3'
> ('serial:/dev/ttyS3') from '/usr/lib/libgphoto2_port/0.12.0/serial'.
> 0.002373 foreach_func (2): Loaded 'Serial Port Device'
> ('serial:') from '/usr/lib/libgphoto2_port/0.12.0/serial'.
> 0.002383 foreach_func (2): Loaded '' ('^serial:') from
> '/usr/lib/libgphoto2_port/0.12.0/serial'.
> 0.002392 foreach_func (2): Called for filename
> '/usr/lib/libgphoto2_port/0.12.0/usb1'.
> 0.008701 foreach_func (2): Loaded '' ('^usb:') from
> '/usr/lib/libgphoto2_port/0.12.0/usb1'.
> 0.008707 foreach_func (2): Loaded 'Universal Serial Bus'
> ('usb:001,008') from '/usr/lib/libgphoto2_port/0.12.0/usb1'.
> 0.008709 foreach_func (2): Called for filename
> '/usr/lib/libgphoto2_port/0.12.0/usbdiskdirect'.
> 0.008811 foreach_func (2): Called for filename
> '/usr/lib/libgphoto2_port/0.12.0/usbscsi'.
> 0.008881 foreach_func (2): Called for filename
> '/usr/lib/libgphoto2_port/0.12.0/vusb'.
> 0.008954 gp_port_library_type (2): ()
> 0.008957 foreach_func (2):
> '/usr/lib/libgphoto2_port/0.12.0/vusb' already loaded
> 0.008983 gp_port_info_list_count (2): Counting entries (11 available)...
> 0.008986 gp_port_info_list_count (2): 7 regular entries available.
> 0.009002 gp_abilities_list_load_dir (2): Using ltdl to load camera
> libraries from '/usr/lib/libgphoto2/2.5.14.1'...
> 0.009124 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/adc65'.
> 0.009129 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/agfa_cl20'.
> 0.009130 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/aox'.
> 0.009131 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/ax203'.
> 0.009132 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/barbie'.
> 0.009134 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/canon'.
> 0.009135 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/casio_qv'.
> 0.009136 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/clicksmart310'.
> 0.009138 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/digigr8'.
> 0.009139 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/digita'.
> 0.009141 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/dimagev'.
> 0.009155 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/dimera3500'.
> 0.009157 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/directory'.
> 0.009158 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/enigma13'.
> 0.009160 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/fuji'.
> 0.009162 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/gsmart300'.
> 0.009173 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/hp215'.
> 0.009175 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/iclick'.
> 0.009177 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/jamcam'.
> 0.009178 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/jd11'.
> 0.009180 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/jl2005a'.
> 0.009182 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/jl2005c'.
> 0.009184 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/kodak_dc120'.
> 0.009186 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/kodak_dc210'.
> 0.009187 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/kodak_dc240'.
> 0.009189 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/kodak_dc3200'.
> 0.009191 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/kodak_ez200'.
> 0.009193 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/konica'.
> 0.009195 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/konica_qm150'.
> 0.009196 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/largan'.
> 0.009198 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/lg_gsm'.
> 0.009200 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/mars'.
> 0.009202 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/mustek'.
> 0.009204 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/panasonic_coolshot'.
> 0.009206 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/panasonic_dc1000'.
> 0.009208 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/panasonic_dc1580'.
> 0.009210 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/panasonic_l859'.
> 0.009212 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/pccam300'.
> 0.009214 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/pccam600'.
> 0.009216 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/pentax'.
> 0.009218 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/polaroid_pdc320'.
> 0.009221 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/polaroid_pdc640'.
> 0.009223 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/polaroid_pdc700'.
> 0.009225 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/ptp2'.
> 0.009227 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/ricoh'.
> 0.009229 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/ricoh_g3'.
> 0.009231 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/samsung'.
> 0.009233 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/sierra'.
> 0.009234 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/sipix_blink2'.
> 0.009237 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/sipix_web2'.
> 0.009239 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/smal'.
> 0.009241 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/sonix'.
> 0.009242 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/sony_dscf1'.
> 0.009244 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/sony_dscf55'.
> 0.009246 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/soundvision'.
> 0.009248 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/spca50x'.
> 0.009251 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/sq905'.
> 0.009252 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/st2205'.
> 0.009254 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/stv0674'.
> 0.009256 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/stv0680'.
> 0.009259 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/sx330z'.
> 0.009261 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/topfield'.
> 0.009263 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/toshiba_pdrm11'.
> 0.009265 foreach_func (2): Found '/usr/lib/libgphoto2/
> 2.5.14.1/tp6801'.
> 0.009269 gp_abilities_list_load_dir (2): Found 64 camera drivers.
> 0.023027 gp_port_info_list_count (2): Counting entries (11
> available)...
> 0.023036 gp_port_info_list_count (2): 7 regular entries available.
> 0.023038 gp_port_new (2): Creating new device...
> 0.023043 gp_port_info_list_get_info (2): Getting info of entry 0 (11
> available)...
> 0.023114 gp_port_set_settings (2): Setting settings...
> 0.023119 gp_port_info_list_get_info (2): Getting info of entry 1 (11
> available)...
> 0.023167 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.023171 gp_port_set_settings (2): Setting settings...
> 0.023173 gp_port_info_list_get_info (2): Getting info of entry 2 (11
> available)...
> 0.023212 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.023215 gp_port_set_settings (2): Setting settings...
> 0.023218 gp_port_info_list_get_info (2): Getting info of entry 3 (11
> available)...
> 0.023253 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.023256 gp_port_set_settings (2): Setting settings...
> 0.023258 gp_port_info_list_get_info (2): Getting info of entry 4 (11
> available)...
> 0.023294 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.023296 gp_port_set_settings (2): Setting settings...
> 0.023299 gp_port_info_list_get_info (2): Getting info of entry 5 (11
> available)...
> 0.023332 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.023335 gp_port_set_settings (2): Setting settings...
> 0.023337 gp_port_info_list_get_info (2): Getting info of entry 6 (11
> available)...
> 0.025105 gp_port_set_timeout (2): Setting port timeout to 5000
> milliseconds.
> 0.025111 gp_port_set_settings (2): Setting settings...
> 0.025115 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port
> usb:001,008, (new int=0, conf=-1, alt=-1) port usb:001,008
> 0.025131 gp_libusb1_update (2): lowlevel libusb1 port not yet
> opened, no need for libusb changes
> 0.025133 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras...
> 0.025461 gp_libusb1_find_device_by_class_lib(2): Looking for USB device
> (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)...
> 0.025692 gp_libusb1_find_device_by_class_lib(2): Looking for USB device
> (class 0x6, subclass, 0x1, protocol 0x1)...
> 0.025699 gp_libusb1_find_device_by_class_lib(2): Found USB class device
> (class 0x6, subclass, 0x1, protocol 0x1)
> 0.025703 gp_libusb1_find_device_by_class_lib(2): inep to look for is 81
> 0.025706 gp_libusb1_find_device_by_class_lib(2): Detected defaults: config
> 2, interface 0, altsetting 0, idVendor ID 1fab, idProduct 0014, inep 81,
> outep 01, intep 82
> 0.025723 gp_abilities_list_detect_usb(2): Found 'USB PTP Class Camera'
> (0x6,0x1,0x1)
> 0.025728 gp_port_free (2): Freeing port...
> 0.025730 gp_port_close (2): Closing port...
> 0.025880 gp_camera_set_abilities (2): Setting abilities ('USB PTP Class
> Camera')...
> 0.025886 gp_setting_set (2): Setting key 'model' to value 'USB
> PTP Class Camera' (gphoto2)
> 0.025899 save_settings (2): Saving 2 setting(s) to file
> "/home/chrisd/.gphoto/settings"
> 0.026002 gp_port_info_list_lookup_path(2): Looking for path 'usb:001,008'
> (11 entries available)...
> 0.026006 gp_port_info_list_get_info (2): Getting info of entry 6 (11
> available)...
> 0.026019 gp_camera_set_port_info (2): Setting port info for port
> 'Universal Serial Bus' at 'usb:001,008'...
> 0.027555 gp_port_set_timeout (2): Setting port timeout to 5000
> milliseconds.
> 0.027560 gp_port_set_settings (2): Setting settings...
> 0.027563 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port
> usb:001,008, (new int=0, conf=-1, alt=-1) port usb:001,008
> 0.027564 gp_libusb1_update (2): lowlevel libusb1 port not yet
> opened, no need for libusb changes
> 0.027567 gp_setting_set (2): Setting key 'port' to value
> 'usb:001,008' (gphoto2)
> 0.027569 save_settings (2): Saving 2 setting(s) to file
> "/home/chrisd/.gphoto/settings"
> 0.027655 foreach (2): Executing action 'List Files' for
> folder '/'.
> 0.027660 gp_camera_folder_list_files (2): Listing files in '/'...
> 0.027662 gp_camera_init (2): Initializing camera...
> 0.027671 gp_port_set_error [gphoto2-port.c:1190](0): The supplied vendor or
> product id (0x0,0x0) is not valid.
> 0.027719 gp_libusb1_find_device_by_class_lib(2): Looking for USB device
> (class 0x6, subclass, 0x1, protocol 0x1)...
> 0.027725 gp_libusb1_find_device_by_class_lib(2): Found USB class device
> (class 0x6, subclass, 0x1, protocol 0x1)
> 0.027729 gp_libusb1_find_device_by_class_lib(2): inep to look for is 81
> 0.027732 gp_libusb1_find_device_by_class_lib(2): Detected defaults: config
> 2, interface 0, altsetting 0, idVendor ID 1fab, idProduct 0014, inep 81,
> outep 01, intep 82
> 0.027734 gp_camera_init (2): Loading '/usr/lib/libgphoto2/
> 2.5.14.1/ptp2'...
> 0.028265 gp_port_open (2): Opening USB port...
> 0.028287 gp_libusb1_open (2): ()
> 0.028312 gp_libusb1_open (2): claiming interface 0
> 0.028346 gp_libusb1_queue_interrupt_urbs [libusb1.c:662](0):
> 'libusb_submit_transfer (port->pl->transfers[i])' failed: Input/Output
> error (-1)
> 0.028350 gp_libusb1_queue_interrupt_urbs [libusb1.c:662](0):
> 'libusb_submit_transfer (port->pl->transfers[i])' failed: Input/Output
> error (-1)
> 0.028353 gp_libusb1_queue_interrupt_urbs [libusb1.c:662](0):
> 'libusb_submit_transfer (port->pl->transfers[i])' failed: Input/Output
> error (-1)
> 0.028356 gp_libusb1_queue_interrupt_urbs [libusb1.c:662](0):
> 'libusb_submit_transfer (port->pl->transfers[i])' failed: Input/Output
> error (-1)
> 0.028359 gp_libusb1_queue_interrupt_urbs [libusb1.c:662](0):
> 'libusb_submit_transfer (port->pl->transfers[i])' failed: Input/Output
> error (-1)
> 0.028361 gp_libusb1_queue_interrupt_urbs [libusb1.c:662](0):
> 'libusb_submit_transfer (port->pl->transfers[i])' failed: Input/Output
> error (-1)
> 0.028364 gp_libusb1_queue_interrupt_urbs [libusb1.c:662](0):
> 'libusb_submit_transfer (port->pl->transfers[i])' failed: Input/Output
> error (-1)
> 0.028367 gp_libusb1_queue_interrupt_urbs [libusb1.c:662](0):
> 'libusb_submit_transfer (port->pl->transfers[i])' failed: Input/Output
> error (-1)
> 0.028370 gp_libusb1_queue_interrupt_urbs [libusb1.c:662](0):
> 'libusb_submit_transfer (port->pl->transfers[i])' failed: Input/Output
> error (-1)
> 0.028373 gp_libusb1_queue_interrupt_urbs [libusb1.c:662](0):
> 'libusb_submit_transfer (port->pl->transfers[i])' failed: Input/Output
> error (-1)
> 0.028835 camera_init (2): maxpacketsize 512
> 0.028841 gp_port_set_timeout (2): Setting port timeout to 8000
> milliseconds.
> 0.028845 ptp (2): PTP: Opening session
> 0.028864 ptp_usb_sendreq (2): Sending PTP_OC 0x1002 (Open
> session) (0x1) request...
> 0.028867 gp_port_write (3): Writing 16 = 0x10 bytes to port...
> 0.028877 gp_libusb1_write [libusb1.c:569](0): 'libusb_bulk_transfer
> (port->pl->dh, port->settings.usb.outep, (unsigned char*)bytes, size,
> &curwritten, port->timeout)' failed: Input/Output error (-1)
> 0.028882 gp_port_write [gphoto2-port.c:406](0): Writing 16 = 0x10 bytes to
> port failed: Error writing to the port (-35)
> 0.028886 ptp_usb_sendreq [usb.c:109] (0): PTP_OC 0x1002 sending req failed:
> Error writing to the port (-35)
> 0.028888 ptp_usb_sendreq (2): Clearing halt on OUT EP and
> retrying once.
> 0.028891 gp_port_usb_clear_halt (2): Clear USB halt...
> 0.028904 gp_libusb1_clear_halt_lib [libusb1.c:555](0):
> 'libusb_clear_halt(port->pl->dh, internal_ep)' failed: Entity not found (-5)
> 0.028907 gp_port_write (3): Writing 16 = 0x10 bytes to port...
> 0.028911 gp_libusb1_write [libusb1.c:569](0): 'libusb_bulk_transfer
> (port->pl->dh, port->settings.usb.outep, (unsigned char*)bytes, size,
> &curwritten, port->timeout)' failed: Input/Output error (-1)
> 0.028915 gp_port_write [gphoto2-port.c:406](0): Writing 16 = 0x10 bytes to
> port failed: Error writing to the port (-35)
> 0.028918 ptp_usb_sendreq [usb.c:109] (0): PTP_OC 0x1002 sending req failed:
> Error writing to the port (-35)
> 0.028931 camera_init [library.c:8047](0): 'ptp_opensession (params,
> sessionid)' failed: PTP I/O Error (0x02ff)
> 0.028933 ptp_usb_control_device_reset_request(2): Sending usb device reset
> request.
> 0.028937 gp_port_usb_msg_class_write (3): Writing message (request=0x66
> value=0x0 index=0x0 size=0=0x0): (no hexdump, NULL buffer)
> 8.029062 gp_libusb1_msg [libusb1.c:714](0): 'handled =
> libusb_control_transfer (port->pl->dh, flags, request, value, index,
> (unsigned char*)bytes, size, port->timeout)' failed: Operation timed out
> (-7)
> 8.029089 ptp (2): PTP: Opening session
> 8.029112 ptp_usb_sendreq (2): Sending PTP_OC 0x1002 (Open
> session) (0x1) request...
> 8.029126 gp_port_write (3): Writing 16 = 0x10 bytes to port...
> 8.029156 gp_libusb1_write [libusb1.c:569](0): 'libusb_bulk_transfer
> (port->pl->dh, port->settings.usb.outep, (unsigned char*)bytes, size,
> &curwritten, port->timeout)' failed: Input/Output error (-1)
> 8.029175 gp_port_write [gphoto2-port.c:406](0): Writing 16 = 0x10 bytes to
> port failed: Error writing to the port (-35)
> 8.029190 ptp_usb_sendreq [usb.c:109] (0): PTP_OC 0x1002 sending req failed:
> Error writing to the port (-35)
> 8.029198 ptp_usb_sendreq (2): Clearing halt on OUT EP and
> retrying once.
> 8.029206 gp_port_usb_clear_halt (2): Clear USB halt...
> 8.029220 gp_libusb1_clear_halt_lib [libusb1.c:555](0):
> 'libusb_clear_halt(port->pl->dh, internal_ep)' failed: Entity not found (-5)
> 8.029230 gp_port_write (3): Writing 16 = 0x10 bytes to port...
> 8.029243 gp_libusb1_write [libusb1.c:569](0): 'libusb_bulk_transfer
> (port->pl->dh, port->settings.usb.outep, (unsigned char*)bytes, size,
> &curwritten, port->timeout)' failed: Input/Output error (-1)
> 8.029258 gp_port_write [gphoto2-port.c:406](0): Writing 16 = 0x10 bytes to
> port failed: Error writing to the port (-35)
> 8.029269 ptp_usb_sendreq [usb.c:109] (0): PTP_OC 0x1002 sending req failed:
> Error writing to the port (-35)
> 8.029282 camera_init [library.c:8047](0): 'ptp_opensession (params,
> sessionid)' failed: PTP I/O Error (0x02ff)
> 8.029291 ptp_usb_control_device_reset_request(2): Sending usb device reset
> request.
> 8.029303 gp_port_usb_msg_class_write (3): Writing message (request=0x66
> value=0x0 index=0x0 size=0=0x0): (no hexdump, NULL buffer)
> 16.029449 gp_libusb1_msg [libusb1.c:714](0): 'handled =
> libusb_control_transfer (port->pl->dh, flags, request, value, index,
> (unsigned char*)bytes, size, port->timeout)' failed: Operation timed out
> (-7)
> 16.029479 ptp (2): PTP: Opening session
> 16.029502 ptp_usb_sendreq (2): Sending PTP_OC 0x1002 (Open
> session) (0x1) request...
> 16.029514 gp_port_write (3): Writing 16 = 0x10 bytes to
> port...
> 16.029538 gp_libusb1_write [libusb1.c:569](0): 'libusb_bulk_transfer
> (port->pl->dh, port->settings.usb.outep, (unsigned char*)bytes, size,
> &curwritten, port->timeout)' failed: Input/Output error (-1)
> 16.029559 gp_port_write [gphoto2-port.c:406](0): Writing 16 = 0x10 bytes to
> port failed: Error writing to the port (-35)
> 16.029574 ptp_usb_sendreq [usb.c:109] (0): PTP_OC 0x1002 sending req
> failed: Error writing to the port (-35)
> 16.029582 ptp_usb_sendreq (2): Clearing halt on OUT EP and
> retrying once.
> 16.029588 gp_port_usb_clear_halt (2): Clear USB halt...
> 16.029600 gp_libusb1_clear_halt_lib [libusb1.c:555](0):
> 'libusb_clear_halt(port->pl->dh, internal_ep)' failed: Entity not found (-5)
> 16.029606 gp_port_write (3): Writing 16 = 0x10 bytes to
> port...
> 16.029619 gp_libusb1_write [libusb1.c:569](0): 'libusb_bulk_transfer
> (port->pl->dh, port->settings.usb.outep, (unsigned char*)bytes, size,
> &curwritten, port->timeout)' failed: Input/Output error (-1)
> 16.029633 gp_port_write [gphoto2-port.c:406](0): Writing 16 = 0x10 bytes to
> port failed: Error writing to the port (-35)
> 16.029645 ptp_usb_sendreq [usb.c:109] (0): PTP_OC 0x1002 sending req
> failed: Error writing to the port (-35)
> 16.029658 camera_init [library.c:8047](0): 'ptp_opensession (params,
> sessionid)' failed: PTP I/O Error (0x02ff)
> 16.029669 camera_init [library.c:8075](0): 'ret' failed: 'PTP I/O Error'
> (0x02ff)
> 16.029687 gp_context_error (0): PTP I/O Error
>
> *** Error ***
> PTP I/O Error
> 16.029722 gp_port_close (2): Closing port...
> 16.030850 _close_async_interrupts (2): canceling transfer 0:0x1693f70
> (status 0)
> 16.030881 _close_async_interrupts [libusb1.c:461](0):
> 'libusb_cancel_transfer(port->pl->transfers[i])' failed: Entity not found
> (-5)
> 16.030893 _close_async_interrupts (2): canceling transfer 1:0x165a710
> (status 0)
> 16.030904 _close_async_interrupts [libusb1.c:461](0):
> 'libusb_cancel_transfer(port->pl->transfers[i])' failed: Entity not found
> (-5)
> 16.030912 _close_async_interrupts (2): canceling transfer 2:0x1693e10
> (status 0)
> 16.030922 _close_async_interrupts [libusb1.c:461](0):
> 'libusb_cancel_transfer(port->pl->transfers[i])' failed: Entity not found
> (-5)
> 16.030931 _close_async_interrupts (2): canceling transfer 3:0x166b4f0
> (status 0)
> 16.030940 _close_async_interrupts [libusb1.c:461](0):
> 'libusb_cancel_transfer(port->pl->transfers[i])' failed: Entity not found
> (-5)
> 16.030948 _close_async_interrupts (2): canceling transfer 4:0x1632380
> (status 0)
> 16.030957 _close_async_interrupts [libusb1.c:461](0):
> 'libusb_cancel_transfer(port->pl->transfers[i])' failed: Entity not found
> (-5)
> 16.030966 _close_async_interrupts (2): canceling transfer 5:0x165f3e0
> (status 0)
> 16.030975 _close_async_interrupts [libusb1.c:461](0):
> 'libusb_cancel_transfer(port->pl->transfers[i])' failed: Entity not found
> (-5)
> 16.030983 _close_async_interrupts (2): canceling transfer 6:0x1634c60
> (status 0)
> 16.030992 _close_async_interrupts [libusb1.c:461](0):
> 'libusb_cancel_transfer(port->pl->transfers[i])' failed: Entity not found
> (-5)
> 16.031002 _close_async_interrupts (2): canceling transfer 7:0x168f6a0
> (status 0)
> 16.031009 _close_async_interrupts [libusb1.c:461](0):
> 'libusb_cancel_transfer(port->pl->transfers[i])' failed: Entity not found
> (-5)
> 16.031022 _close_async_interrupts (2): canceling transfer 8:0x1692270
> (status 0)
> 16.031029 _close_async_interrupts [libusb1.c:461](0):
> 'libusb_cancel_transfer(port->pl->transfers[i])' failed: Entity not found
> (-5)
> 16.031037 _close_async_interrupts (2): canceling transfer 9:0x165a070
> (status 0)
> 16.031046 _close_async_interrupts [libusb1.c:461](0):
> 'libusb_cancel_transfer(port->pl->transfers[i])' failed: Entity not found
> (-5)
> 16.031398 gp_context_error (0): An error occurred in the
> io-library ('I/O problem'): The supplied vendor or product id (0x0,0x0) is
> not valid.
>
> *** Error ***
> An error occurred in the io-library ('I/O problem'): The supplied vendor or
> product id (0x0,0x0) is not valid.
> *** Error (-7: 'I/O problem') ***
>
> 16.032277 gp_camera_free (2): Freeing camera...
> 16.032289 gp_port_free (2): Freeing port...
> 16.032297 gp_port_close (2): Closing port...
> 16.032597 gp_filesystem_reset (2): resetting filesystem
> 16.032621 gp_filesystem_lru_clear (2): Clearing fscache LRU list...
> 16.032627 gp_filesystem_lru_clear (2): fscache LRU list already empty
> 16.032632 delete_all_folders (2): Internally deleting all folders
> from '/'...
> 16.032638 lookup_folder (2): Lookup folder '/'...
> 16.032644 lookup_folder (2): Found! / is 0x1625640
> 16.032653 recurse_delete_folder (2): Recurse delete folder 0x1625640//
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Gphoto-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/gphoto-user
--
Marcus Meissner,SUSE LINUX GmbH; Maxfeldstrasse 5; D-90409 Nuernberg; Zi. 3.1-33,+49-911-740 53-432,,serv=loki,mail=wotan,type=real <[email protected]>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot