Re: how to enable liveview ?

Hi Folks,

just in case someone is facing the same problem, in future, i couldnt 
solve it via gphoto.

So i just built a cable replacing the shutter remote, and i trigger the 
focus and shutter by this cable, and my RPI.

I wil use gphoto to download pictures and display them on a videoprojector

Franck


On 04/06/2018 10:37, Franck wrote:
> Hi,
>
> i'm doing a photobooth project, based on raspberry, canon EOS 600D, 
> and gphoto2.
>
> I would like the people to see themselves in the liveview, before 
> pushing the button.
>
> So i made a little python script to take the picture when the 
> photobooth's button is pressed.
>
> Everything works fine so far, except that each time i take a picture, 
> my liveview go back to menu mode.
>
> If i take the picture with the camera's button, it stays in liveview
>
> If i use the Photobooth's button, which triggers the command gphoto2 
> -take-picture-and-download , it leaves the liveview.
>
>
> Anyone as an idea why ? And better, a way to solve this problem ?
>
> For the curious, i'm doing something similar to this :
>
> http://www.w3sh.com/2013/03/29/photomaton-instagram/
>
> Thanks in advance for any help
>
>
> ------------------------------------------------------------------------------ 
>
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Gphoto-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/gphoto-user


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot