RE: Ribosome build problem - need help

"Jyotsana Rathore" <[email protected]>
Newsgroups gmane.comp.multimedia.helix.devel
Message-ID <[email protected]> 
Hi Chuong,

 

The redirection to the webpage is an expected behavior. 

Well, the stack trace basically indicates that the threads have been running
longer than some arbitrary time limit. One thing you might want to try is to
use python 2.4.3
https://ribosome.helixcommunity.org/2006/devdocs/requirements.html

And also include the complete SDK Path in the .buildrc

Was the ribosome checkout complete; were there any problems while checking
out Ribosome?

Also try out this command:

cvs -d :ext:[email protected]:/cvsroot/client checkout -d BIF
build/BIF

 

Thanks,

Jyotsana

  _____  

From: [email protected] [mailto:[email protected]] 
Sent: Friday, June 05, 2009 5:53 AM
To: [email protected]; [email protected];
[email protected]
Cc: [email protected]; [email protected];
[email protected]; [email protected]; [email protected];
[email protected]; [email protected];
[email protected]
Subject: RE: Ribosome build problem - need help

 

Yes, long time ago and again yesterday before new attempt on a colleague's
recommendation.

After clicking on agree the webpage
https://helixcommunity.org/projects/distribution/files pops up.

 

Is there some special project I need to register to?

 

Thanks,

Chuong

 

 

 

  _____  

From: ext Jyotsana Rathore [mailto:[email protected]] 
Sent: Thursday, June 04, 2009 5:05 PM
To: Pham-Huu Chuong (Nokia-D-MSW/Dallas);
[email protected]; [email protected]
Cc: Jiau Arnold (Nokia-D-MSW/Dallas); Adookkattil Saleem
(Nokia-D-MSW/Dallas); Fu Liz (EXT-DextraTech-MSW/Dallas); Ren Jun
(Nokia-D-MSW/Dallas); Yu I-Chin (Nokia-D-MSW/Dallas); Srivastava Asheesh
(EXT-Infovision-MSW/Dallas); Shetty Girish (Nokia-D-MSW/Dallas); Liu Junhong
(Nokia-D-MSW/Dallas)
Subject: RE: Ribosome build problem - need help

Hi Chuong,

 

Have you agreed to the BUELA yet: https://helixcommunity.org/beula/ 

 

Thanks,

Jyotsana

  _____  

From: [email protected] [mailto:[email protected]] 
Sent: Thursday, June 04, 2009 2:20 PM
To: [email protected];
[email protected]
Cc: [email protected]; [email protected];
[email protected]; [email protected]; [email protected];
[email protected]; [email protected];
[email protected]
Subject: RE: Ribosome build problem - need help

 

Hi all,

 

A look into the last created log file under folder ribisome_logs points to a
distribution problem.

 

What could the fix be? Is it an access right issue?

 

Thanks,

Chuong

 

#-00000097][2009-06-04 14:32:21][5016][INFO ] : Building filename lists.

[#-00000104][2009-06-04 14:32:21][5016][INFO ] : Parsing BIF
"X:\helix\build\bif-cvs\helix\common-restricted/build/BIF\helix_restricted.b
if"

[#-00000114][2009-06-04 14:32:21][5016][INFO ] : Using target
'phonon_backend' from bif
'X:\helix\build\bif-cvs\helix\common-restricted/build/BIF\helix_restricted.b
if'.

[#-00000115][2009-06-04 14:32:21][5016][INFO ] : Building dependency tree
for targets.

[#-00000121][2009-06-04 14:32:21][5016][INFO ] : Checking out source code
and binary distributions.

[#-00000149][2009-06-04 14:32:22][5016][INFO ] : Enabling threading, 2
threads requested.

[#-00000151][2009-06-04 14:32:22][5016][INFO ] : Starting thread scheduler
to process jobs.

[#-00000182][2009-06-04 14:32:22][5200][INFO ] : TESTING
distribution/symbian-91-armv5/helix-client-s60-ng

[#-00000186][2009-06-04 14:32:22][5200][INFO ] : RESULT => False

[#-00000207][2009-06-04 14:32:22][5200][INFO ] : TESTING
distribution/symbian-91-armv5/helix-client-s60-ng-

[#-00000211][2009-06-04 14:32:22][5200][INFO ] : RESULT => False

[#-00000232][2009-06-04 14:32:22][5200][INFO ] : TESTING
distribution/symbian-91-armv5/helix-client-s60-

[#-00000236][2009-06-04 14:32:22][5200][INFO ] : RESULT => False

[#-00000257][2009-06-04 14:32:22][5200][INFO ] : TESTING
distribution/symbian-91-armv5/helix-client-

[#-00000261][2009-06-04 14:32:22][5200][INFO ] : RESULT => False

[#-00000282][2009-06-04 14:32:23][5200][INFO ] : TESTING
distribution/symbian-91-armv5/helix-

[#-00000286][2009-06-04 14:32:23][5200][INFO ] : RESULT => False

[#-00000306][2009-06-04 14:32:23][5200][INFO ] : TESTING
distribution/symbian-91-armv5/release

[#-00000310][2009-06-04 14:32:23][5200][INFO ] : RESULT => False

[#-00000320][2009-06-04 14:32:23][5200][INFO ] : TESTING
distribution/symbian-91-armv5

[#-00000324][2009-06-04 14:32:23][5200][INFO ] : RESULT => False

[#-00000336][2009-06-04 14:32:23][5200][INFO ] : TESTING
distribution/symbian-91-armv5-/helix-client-s60-ng

[#-00000340][2009-06-04 14:32:23][5200][INFO ] : RESULT => False

[#-00000361][2009-06-04 14:32:23][5200][INFO ] : TESTING
distribution/symbian-91-armv5-/helix-client-s60-ng-

[#-00000365][2009-06-04 14:32:23][5200][INFO ] : RESULT => False

[#-00000386][2009-06-04 14:32:23][5200][INFO ] : TESTING
distribution/symbian-91-armv5-/helix-client-s60-

[#-00000390][2009-06-04 14:32:23][5200][INFO ] : RESULT => False

[#-00000411][2009-06-04 14:32:23][5200][INFO ] : TESTING
distribution/symbian-91-armv5-/helix-client-

[#-00000415][2009-06-04 14:32:23][5200][INFO ] : RESULT => False

[#-00000436][2009-06-04 14:32:23][5200][INFO ] : TESTING
distribution/symbian-91-armv5-/helix-

[#-00000440][2009-06-04 14:32:23][5200][INFO ] : RESULT => False

 

_____________________________________________ 

From:    Pham-Huu Chuong (Nokia-D-MSW/Dallas)  

Sent:   Thursday, June 04, 2009 11:11 AM

To:     [email protected];
[email protected]

Cc:     Jiau Arnold (Nokia-D-MSW/Dallas); Adookkattil Saleem
(Nokia-D-MSW/Dallas); Fu Liz (EXT-DextraTech-MSW/Dallas); Ren Jun
(Nokia-D-MSW/Dallas); Yu I-Chin (Nokia-D-MSW/Dallas); Srivastava Asheesh
(EXT-Infovision-MSW/Dallas); Shetty Girish (Nokia-D-MSW/Dallas); Liu Junhong
(Nokia-D-MSW/Dallas)

Subject:        Ribosome build problem - need help

 

 

Hi all,

 

I am encountering a severe build problem, the build with below parameters
gets stuck indefinitely after receiving some 125,568 packets from cvs
server.

[0] Set BIF branch (helix_restricted)

[1] Set Target(s) (symbianMmf_wm)

[2] Set Profile (x:\Ribosome\build\umakepf\helix-client-s60-50-mmf-mdf-dsp)

 

Ribosome has been checked out on June 3rd, 2009 with cvs -d
:ext:[email protected]:/cvsroot/ribosome co build

>From the last output of the cmd window it looks like the threads are
scheduled but never activated, the build.out log is extremely short.

[#-00000121][2009-06-04 08:32:51][4800][INFO ] : Checking out source code
and b

nary distributions.

Group size: 31  Modules: 197  Threads: 2

[#-00000149][2009-06-04 08:32:51][4800][INFO ] : Enabling threading, 2
threads

equested.

[#-00000151][2009-06-04 08:32:51][4800][INFO ] : Starting thread scheduler
to p

ocess jobs.

[#-00000184][2009-06-04 08:47:52][4800][INFO ] : Available threads:

=========== 1456 ==========

    stack:

      find @ C:\APPS\actpython\Lib\string.py # 359

      run @ x:\Ribosome\build\lib\shell.py # 726

      run @ x:\Ribosome\build\lib\shell.py # 891

      update @ x:\Ribosome\build\lib\cvs.py # 301

      update @ x:\Ribosome\build\lib\cvs.py # 400

      checkout @ x:\Ribosome\build\lib\cvs.py # 376

      Checkout @ x:\Ribosome\build\lib\cvs.py # 208

      Checkout @ x:\Ribosome\build\lib\cvs.py # 581

      Checkout @ x:\Ribosome\build\lib\cvs.py # 708

      checkout_files_from_tag @ x:\Ribosome\build\lib\buildapp.py # 1009

      checkout_module @ x:\Ribosome\build\lib\buildapp.py # 949

      run @ x:\Ribosome\build\lib\chaingang.py # 169

      doit @ x:\Ribosome\build\lib\chaingang.py # 254

      doit @ x:\Ribosome\build\lib\chaingang.py # 618

      worker @ x:\Ribosome\build\lib\chaingang.py # 263

      worker @ x:\Ribosome\build\lib\chaingang.py # 765

 

=========== 3492 ==========

    stack:

      find @ C:\APPS\actpython\Lib\string.py # 359

      run @ x:\Ribosome\build\lib\shell.py # 726

      run @ x:\Ribosome\build\lib\shell.py # 891

      update @ x:\Ribosome\build\lib\cvs.py # 301

      update @ x:\Ribosome\build\lib\cvs.py # 400

      checkout @ x:\Ribosome\build\lib\cvs.py # 376

      Checkout @ x:\Ribosome\build\lib\cvs.py # 208

      Checkout @ x:\Ribosome\build\lib\cvs.py # 581

      Checkout @ x:\Ribosome\build\lib\cvs.py # 708

      checkout_files_from_tag @ x:\Ribosome\build\lib\buildapp.py # 1009

      checkout_module @ x:\Ribosome\build\lib\buildapp.py # 949

      run @ x:\Ribosome\build\lib\chaingang.py # 169

      doit @ x:\Ribosome\build\lib\chaingang.py # 254

      doit @ x:\Ribosome\build\lib\chaingang.py # 618

      worker @ x:\Ribosome\build\lib\chaingang.py # 263

      worker @ x:\Ribosome\build\lib\chaingang.py # 765

 

I would appreciate your feedback very much.

 

Thanks,

Chuong

The SDK is Nokia pf_5250_200920. I am attaching my .build.rc, helixSet.bat
(renamed to helixSet_bat since .bat file is considered dangerous), and
build.out log file.

<< File: Copy of .buildrc >>  << File: helixSet_bat >>  << File: build1.out
>> 

 

<< OLE Object: Picture (Device Independent Bitmap) >>

_______________________________________________
Helix-client-dev mailing list
[email protected]
http://lists.helixcommunity.org/mailman/listinfo/helix-client-dev
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.