Re: [Open-discuss] SSH Access Issues (2)

Hi Wichers,

It's back, please try again.

Regards,

Kinson

[email protected] wrote:
> Hi,
>
> Is there still the issue of the SSH key not updating to the CVS machine?!
> Because I've waited more than 5 hours after my subscription, like the manual
> stated. And I also had a go with RSA (again waiting at least a couple of
> hours) because of the following post:
> http://lists.helixcommunity.org/pipermail/open-discuss/2006-August/000863.ht
> ml 
>
> Still no luck...
>
> I'm running Windows XP with the latest cygwin version and "$ ssh -v -v -l
> wichers cvs.helixcommunity.org" is giving me the following output:
>
> OpenSSH_4.3p2, OpenSSL 0.9.8b 04 May 2006
> debug1: Reading configuration data /home/wichers/.ssh/config
> debug1: Applying options for cvs.helixcommunity.org
> debug2: ssh_connect: needpriv 0
> debug1: Connecting to cvs.helixcommunity.org [207.188.25.137] port 22.
> debug1: Connection established.
> debug2: key_type_from_name: unknown key type '-----BEGIN'
> debug2: key_type_from_name: unknown key type '-----END'
> debug1: identity file /home/wichers/.ssh/helixid_dsa type 2
> debug1: Remote protocol version 1.99, remote software version OpenSSH_3.9p1
> debug1: match: OpenSSH_3.9p1 pat OpenSSH_3.*
> debug1: Enabling compatibility mode for protocol 2.0
> debug1: Local version string SSH-2.0-OpenSSH_4.3
> debug2: fd 3 setting O_NONBLOCK
> debug1: SSH2_MSG_KEXINIT sent
> debug1: SSH2_MSG_KEXINIT received
> debug2: kex_parse_kexinit:
> diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellma
> n-group1-sha1
> debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
> debug2: kex_parse_kexinit:
> aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,a
> es192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes25
> 6-ctr
> debug2: kex_parse_kexinit:
> aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,a
> es192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes25
> 6-ctr
> debug2: kex_parse_kexinit:
> hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hm
> ac-md5-96
> debug2: kex_parse_kexinit:
> hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hm
> ac-md5-96
> debug2: kex_parse_kexinit: none,[email protected],zlib
> debug2: kex_parse_kexinit: none,[email protected],zlib
> debug2: kex_parse_kexinit:
> debug2: kex_parse_kexinit:
> debug2: kex_parse_kexinit: first_kex_follows 0
> debug2: kex_parse_kexinit: reserved 0
> debug2: kex_parse_kexinit:
> diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellma
> n-group1-sha1
> debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
> debug2: kex_parse_kexinit:
> aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,r
> [email protected],aes128-ctr,aes192-ctr,aes256-ctr
> debug2: kex_parse_kexinit:
> aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,r
> [email protected],aes128-ctr,aes192-ctr,aes256-ctr
> debug2: kex_parse_kexinit:
> hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hm
> ac-md5-96
> debug2: kex_parse_kexinit:
> hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hm
> ac-md5-96
> debug2: kex_parse_kexinit: none,zlib
> debug2: kex_parse_kexinit: none,zlib
> debug2: kex_parse_kexinit:
> debug2: kex_parse_kexinit:
> debug2: kex_parse_kexinit: first_kex_follows 0
> debug2: kex_parse_kexinit: reserved 0
> debug2: mac_init: found hmac-md5
> debug1: kex: server->client aes128-cbc hmac-md5 none
> debug2: mac_init: found hmac-md5
> debug1: kex: client->server aes128-cbc hmac-md5 none
> debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
> debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
> debug2: dh_gen_key: priv key bits set: 127/256
> debug2: bits set: 513/1024
> debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
> debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
> debug1: Host 'cvs.helixcommunity.org' is known and matches the RSA host key.
> debug1: Found key in /home/wichers/.ssh/known_hosts:1
> debug2: bits set: 487/1024
> debug1: ssh_rsa_verify: signature correct
> debug2: kex_derive_keys
> debug2: set_newkeys: mode 1
> debug1: SSH2_MSG_NEWKEYS sent
> debug1: expecting SSH2_MSG_NEWKEYS
> debug2: set_newkeys: mode 0
> debug1: SSH2_MSG_NEWKEYS received
> debug1: SSH2_MSG_SERVICE_REQUEST sent
> debug2: service_accept: ssh-userauth
> debug1: SSH2_MSG_SERVICE_ACCEPT received
> debug2: key: /home/wichers/.ssh/helixid_dsa (0x1002aaa0)
> debug1: Authentications that can continue:
> publickey,gssapi-with-mic,password
> debug1: Next authentication method: publickey
> debug1: Offering public key: /home/wichers/.ssh/helixid_dsa
> debug2: we sent a publickey packet, wait for reply
> debug1: Authentications that can continue:
> publickey,gssapi-with-mic,password
> debug2: we did not send a packet, disable method
> debug1: Next authentication method: password
> [email protected]'s password:
>
> Thanks in advance!
>
> Sander
>
>
> _______________________________________________
> Open-discuss mailing list
> [email protected]
> http://lists.helixcommunity.org/mailman/listinfo/open-discuss
>
>   

-- 
------------------------------------------------------------------------
*Kinson Liu* | Software Development Engineer | RealNetworks, Inc. | 
[email protected] | 206.892.6177

_______________________________________________
Open-discuss mailing list
[email protected]
http://lists.helixcommunity.org/mailman/listinfo/open-discuss