Hi Kinson,
Still no luck, I'm now trying using a virtual machine with a linux
distribution on it. First I've tried copying my cygwin keys to this
distribution (before updating), this didn't work, so I made some new keys
and updated my profile. I'll wait for another hour to see if I get these new
keys working...
Yours, Sander
________________________________
From: Kinson Liu [mailto:[email protected]]
Sent: dinsdag 19 september 2006 20:41
To: Sander
Cc: [email protected]
Subject: Re: [Open-discuss] SSH Access Issues (2)
Hi Sander,
We have updated the ssh keys as you have uploaded. Please check if it still
not works.
Regards,
Kinson
Sander wrote:
Hi Kinson,
Thank you for your fast reply and help, I'm afraid it's still not
working
for me (neither RSA or DSA).
Hope you can help me further...
Yours,
Sander
________________________________
From: Kinson Liu [mailto:[email protected]]
Sent: maandag 18 september 2006 19:34
To: [email protected]
Cc: [email protected]
Subject: Re: [Open-discuss] SSH Access Issues (2)
Hi Wichers,
It's back, please try again.
Regards,
Kinson
[email protected] wrote:
Hi,
Is there still the issue of the SSH key not updating to the
CVS
machine?!
Because I've waited more than 5 hours after my subscription,
like
the manual
stated. And I also had a go with RSA (again waiting at least
a
couple of
hours) because of the following post:
http://lists.helixcommunity.org/pipermail/open-discuss/2006-August/000863.ht
ml
Still no luck...
I'm running Windows XP with the latest cygwin version and "$
ssh -v
-v -l
wichers cvs.helixcommunity.org" is giving me the following
output:
OpenSSH_4.3p2, OpenSSL 0.9.8b 04 May 2006
debug1: Reading configuration data /home/wichers/.ssh/config
debug1: Applying options for cvs.helixcommunity.org
debug2: ssh_connect: needpriv 0
debug1: Connecting to cvs.helixcommunity.org
[207.188.25.137] port
22.
debug1: Connection established.
debug2: key_type_from_name: unknown key type '-----BEGIN'
debug2: key_type_from_name: unknown key type '-----END'
debug1: identity file /home/wichers/.ssh/helixid_dsa type 2
debug1: Remote protocol version 1.99, remote software
version
OpenSSH_3.9p1
debug1: match: OpenSSH_3.9p1 pat OpenSSH_3.*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_4.3
debug2: fd 3 setting O_NONBLOCK
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit:
diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellma
n-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit:
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,a
es192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes25
6-ctr
debug2: kex_parse_kexinit:
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,a
es192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes25
6-ctr
debug2: kex_parse_kexinit:
hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hm
ac-md5-96
debug2: kex_parse_kexinit:
hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hm
ac-md5-96
debug2: kex_parse_kexinit: none,[email protected],zlib
debug2: kex_parse_kexinit: none,[email protected],zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit:
diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellma
n-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit:
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,r
[email protected],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit:
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,r
[email protected],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit:
hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hm
ac-md5-96
debug2: kex_parse_kexinit:
hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hm
ac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_init: found hmac-md5
debug1: kex: server->client aes128-cbc hmac-md5 none
debug2: mac_init: found hmac-md5
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug2: dh_gen_key: priv key bits set: 127/256
debug2: bits set: 513/1024
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Host 'cvs.helixcommunity.org' is known and matches
the RSA
host key.
debug1: Found key in /home/wichers/.ssh/known_hosts:1
debug2: bits set: 487/1024
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /home/wichers/.ssh/helixid_dsa (0x1002aaa0)
debug1: Authentications that can continue:
publickey,gssapi-with-mic,password
debug1: Next authentication method: publickey
debug1: Offering public key: /home/wichers/.ssh/helixid_dsa
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue:
publickey,gssapi-with-mic,password
debug2: we did not send a packet, disable method
debug1: Next authentication method: password
[email protected]'s password:
Thanks in advance!
Sander
_______________________________________________
Open-discuss mailing list
[email protected]
http://lists.helixcommunity.org/mailman/listinfo/open-discuss
--
________________________________
Kinson Liu | Software Development Engineer | RealNetworks, Inc. |
[email protected] | 206.892.6177
_______________________________________________
Open-discuss mailing list
[email protected]
http://lists.helixcommunity.org/mailman/listinfo/open-discuss
lmpx.com only provides a reader for public news (NNTP) servers. It is not
affiliated with the servers or forums shown here and is not responsible for
the content of articles, which is written by their respective authors.