Re: Mkclean sigsev on a specific file

I already reported the problem to Handbrake. It's a low priority bug for
them.

I already fixed a bug that looks like this. Can you do another SVN checkout
to make sure you're using the right value ?

On Fri, Jul 16, 2010 at 8:38 PM, julroy67 <[email protected]> wrote:

> Nice, good to hear it, thanks. But now, shall I report this to the
> handbrake devs ? And second one, I trie the svn version, and it seems
> to work, but now it is a libc segfault :
> http://julroy67.free.fr/DL/bt_libc.log :(
>
> But still thanks for the fix.
>
> 2010/7/16 Steve Lhomme <[email protected]>:
> > Hi again,
> > I've identified the problem. It seems that Handbrake is writing a CRC
> > element at the wrong location (second element of SegmentInfo) and with
> the
> > wrong size (12 instead of 4). That made mkclean behave inconsistently.
> I've
> > identified other possible problems in mkclean and they are all fixed in
> SVN.
> > I am not going to make a release today as I have other things I want to
> put
> > in the next one (hopefully this week-end).
> > If you don't want to wait for the next release, you can get the latest
> > sources from SVN
> > at
> https://matroska.svn.sourceforge.net/svnroot/matroska/trunk/foundation_src
> > You will need to copy <root>/mkclean/default_config.h into
> <root>/config.h
> > before running "coremake gcc_linux_x64"
> > Steve
> > On Fri, Jul 16, 2010 at 4:41 PM, julroy67 <[email protected]> wrote:
> >>
> >> Ok, here is the dump http://julroy67.free.fr/DL/TGBS_4925_dump_1M («
> >> dd if=Test.mkv of=TGBS_4925_dump_1M bs=1M count=1 » should be
> >> correct).
> >>
> >> 2010/7/16 Steve Lhomme <[email protected]>:
> >> > OK that all looks correct. Can you cut the first 1 or 2 first MB of
> the
> >> > file
> >> > and send them to me ?
> >> >
> >> > On Fri, Jul 16, 2010 at 4:30 PM, julroy67 <[email protected]> wrote:
> >> >>
> >> >> Yes, it plays fine (VLC and Mplayer at least). The mkvinfo simple
> >> >> output : http://julroy67.free.fr/DL/TGBS_4925_mkvinfo.txt
> >> >>
> >> >> 2010/7/16 Steve Lhomme <[email protected]>:
> >> >> > OK it seems your file has no (found) Tracks. Does it play correctly
> ?
> >> >> > It's
> >> >> > not normal for a file that big to have no Tracks (it's possible for
> >> >> > files
> >> >> > with only chapters or attachments). And theoretically the code
> should
> >> >> > exit
> >> >> > before the crash, as there is a check to see if there are Cluster
> but
> >> >> > no
> >> >> > matching Tracks. So I don't know how you are getting to that point.
> >> >> > Can you send me the output of mkvinfo on that file ? You can use
> >> >> > pastebin or
> >> >> > that same web server you used.
> >> >> > Thanks,
> >> >> > Steve
> >> >> >
> >> >> > On Fri, Jul 16, 2010 at 3:50 PM, julroy67 <[email protected]>
> wrote:
> >> >> >>
> >> >> >> Here is the nice full output :
> >> >> >> http://julroy67.free.fr/DL/mkclean_full_backtrace.log
> >> >> >>
> >> >> >> Sending the file can be made, but they all are over 1 Gb, the
> >> >> >> smallest
> >> >> >> is 1.2 Gb and would take a long time to upload if so.
> >> >> >>
> >> >> >> 2010/7/16 Steve Lhomme <[email protected]>:
> >> >> >> > Can you get a bigger backtrace, up to the main() if possible ?
> Is
> >> >> >> > it
> >> >> >> > possible to get one of the files that crash (the smallest) ?
> >> >> >> >
> >> >> >> > On Fri, Jul 16, 2010 at 3:26 PM, julroy67 <[email protected]>
> >> >> >> > wrote:
> >> >> >> >>
> >> >> >> >> So, better, than before. The first version, with a clean build,
> >> >> >> >> crashes like the arch package, same output. And now for the
> debug
> >> >> >> >> version, the real output (I have missed up something in the
> other
> >> >> >> >> version, that crashed at startup) :
> >> >> >> >>
> >> >> >> >> 15:23 julroy67@momoko-laptop ~/Apps/mkclean/mkclean-0.4.1% gdb
> >> >> >> >> release/gcc_linux_x64_debug/mkclean
> >> >> >> >> GNU gdb (GDB) 7.1
> >> >> >> >> Copyright (C) 2010 Free Software Foundation, Inc.
> >> >> >> >> License GPLv3+: GNU GPL version 3 or later
> >> >> >> >> <http://gnu.org/licenses/gpl.html>
> >> >> >> >> This is free software: you are free to change and redistribute
> >> >> >> >> it.
> >> >> >> >> There is NO WARRANTY, to the extent permitted by law.  Type
> "show
> >> >> >> >> copying"
> >> >> >> >> and "show warranty" for details.
> >> >> >> >> This GDB was configured as "x86_64-unknown-linux-gnu".
> >> >> >> >> For bug reporting instructions, please see:
> >> >> >> >> <http://www.gnu.org/software/gdb/bugs/>...
> >> >> >> >> Reading symbols from
> >> >> >> >>
> >> >> >> >>
> >> >> >> >>
> >> >> >> >>
> >> >> >> >>
> /home/julroy67/Apps/mkclean/mkclean-0.4.1/release/gcc_linux_x64_debug/mkclean...done.
> >> >> >> >> (gdb) run --optimize --remux Test.mkv Test.mkv.2
> >> >> >> >> Starting program:
> >> >> >> >>
> >> >> >> >>
> >> >> >> >>
> >> >> >> >>
> >> >> >> >>
> /home/julroy67/Apps/mkclean/mkclean-0.4.1/release/gcc_linux_x64_debug/mkclean
> >> >> >> >> --optimize --remux Test.mkv Test.mkv.2
> >> >> >> >> [Thread debugging using libthread_db enabled]
> >> >> >> >> Progress 1/3: 100%
> >> >> >> >>
> >> >> >> >> Program received signal SIGSEGV, Segmentation fault.
> >> >> >> >> 0x000000000042b4af in EBML_MasterFindFirstElt (Element=0x0,
> >> >> >> >> Context=0x656ce0, bCreateIfNull=0, SetDefault=0) at
> >> >> >> >> ebmlmaster.c:46
> >> >> >> >> 46          for
> >> >> >> >> (i=EBML_MasterChildren(Element);i;i=EBML_MasterNext(i))
> >> >> >> >>
> >> >> >> >> This one is the good, I think.
> >> >> >> >>
> >> >> >> >> 2010/7/16 Steve Lhomme <[email protected]>:
> >> >> >> >> > Before starting to debug you should try to build it first
> like
> >> >> >> >> > I
> >> >> >> >> > just
> >> >> >> >> > described you. Using the available source package
> >> >> >> >> >
> >> >> >> >> >
> >> >> >> >> > here:
> http://dl.matroska.org/downloads/mkclean/mkclean-0.4.1.tar.bz2
> >> >> >> >> > I don't know about archlinux and how you got that package and
> >> >> >> >> > who
> >> >> >> >> > made
> >> >> >> >> > it.
> >> >> >> >> > So I don't know what it contains and if it's correct. mkclean
> >> >> >> >> > doesn't
> >> >> >> >> > use
> >> >> >> >> > the usual autoconf/automake system found on Linux, so maybe
> it
> >> >> >> >> > was
> >> >> >> >> > packaged
> >> >> >> >> > incorrectly.
> >> >> >> >> > If you manage to build it like I said and it still fails, you
> >> >> >> >> > can
> >> >> >> >> > try
> >> >> >> >> > to
> >> >> >> >> > rebuild it with debug informations like this:
> >> >> >> >> > ./coremake distclean
> >> >> >> >> > ./coremake gcc_linux_x64_debug
> >> >> >> >> >
> >> >> >> >> > Steve
> >> >> >> >> > On Fri, Jul 16, 2010 at 3:05 PM, julroy67 <
> [email protected]>
> >> >> >> >> > wrote:
> >> >> >> >> >>
> >> >> >> >> >> Mhh I don't know if I'm correctly generating the debug
> version
> >> >> >> >> >> of
> >> >> >> >> >> mkclean, could you say me step by step how to it. To be
> clear,
> >> >> >> >> >> I'm
> >> >> >> >> >> using archlinux, and archlinux AUR package of mkclean, it
> >> >> >> >> >> works
> >> >> >> >> >> for
> >> >> >> >> >> most of the file, but for at least 2 of them, it crashes as
> >> >> >> >> >> this
> >> >> >> >> >> :
> >> >> >> >> >>
> >> >> >> >> >> 14:59 julroy67@momoko-laptop ~% mkclean --optimize --remux
> >> >> >> >> >> Test.mkv
> >> >> >> >> >> Test.mkv.2
> >> >> >> >> >> Progress 1/3: 100%
> >> >> >> >> >> zsh: segmentation fault  mkclean --optimize --remux Test.mkv
> >> >> >> >> >> Test.mkv.2
> >> >> >> >> >>
> >> >> >> >> >> And it seems that the debug binary that I've generated
> crashes
> >> >> >> >> >> always,
> >> >> >> >> >> so I'm doing wrong, but still, mkclean has a error somewhere
> >> >> >> >> >> ^^'
> >> >> >> >> >> So
> >> >> >> >> >> to
> >> >> >> >> >> be sure to do correctly, I think, a step by step debugging
> >> >> >> >> >> guide
> >> >> >> >> >> would
> >> >> >> >> >> help. Sorry for the hassle.
> >> >> >> >> >>
> >> >> >> >> >> 2010/7/16 Steve Lhomme <[email protected]>:
> >> >> >> >> >> > Hi.
> >> >> >> >> >> > Given the nature of the crash, it looks like it should
> >> >> >> >> >> > always
> >> >> >> >> >> > crash
> >> >> >> >> >> > as
> >> >> >> >> >> > that
> >> >> >> >> >> > error is on the init. It may have to do with linux x64
> >> >> >> >> >> > rather
> >> >> >> >> >> > than
> >> >> >> >> >> > 32
> >> >> >> >> >> > bits.
> >> >> >> >> >> > I'll give it a try on my side.
> >> >> >> >> >> > Or did you compile it with a 32 bits tool chain ? The
> >> >> >> >> >> > regular
> >> >> >> >> >> > bootstrap.sh
> >> >> >> >> >> > and subsequent "make" command are building for 32 bits. In
> >> >> >> >> >> > 0.4.2
> >> >> >> >> >> > that
> >> >> >> >> >> > should
> >> >> >> >> >> > be released soon I changed that and there is now a
> >> >> >> >> >> > "configure"
> >> >> >> >> >> > script.
> >> >> >> >> >> > It
> >> >> >> >> >> > will build the makefiles for 64 bits architecture on 64
> bits
> >> >> >> >> >> > ones...
> >> >> >> >> >> > Meanwhile you can make sure or that by running that in the
> >> >> >> >> >> > root
> >> >> >> >> >> > folder
> >> >> >> >> >> > of
> >> >> >> >> >> > the sources:
> >> >> >> >> >> > ./coremake distclean
> >> >> >> >> >> > ./coremake gcc_linux_x64
> >> >> >> >> >> > Then you run "make -C mkclean" and it should work.
> >> >> >> >> >> >
> >> >> >> >> >> > On Fri, Jul 16, 2010 at 2:41 PM, julroy67
> >> >> >> >> >> > <[email protected]>
> >> >> >> >> >> > wrote:
> >> >> >> >> >> >>
> >> >> >> >> >> >> Hello,
> >> >> >> >> >> >>
> >> >> >> >> >> >> I'm using mkclean to clean up my mkv files that are for
> the
> >> >> >> >> >> >> most
> >> >> >> >> >> >> not
> >> >> >> >> >> >> valid as mkvalidate says, but on certain files, mkclean
> >> >> >> >> >> >> crashes.
> >> >> >> >> >> >> I've
> >> >> >> >> >> >> managed to get the backtrace from gdb. But I'm not sure
> >> >> >> >> >> >> where
> >> >> >> >> >> >> I
> >> >> >> >> >> >> have
> >> >> >> >> >> >> to report the issue.
> >> >> >> >> >> >>
> >> >> >> >> >> >> For the backtrace here's it :
> >> >> >> >> >> >>
> >> >> >> >> >> >> 14:30 julroy67@momoko-laptop
> >> >> >> >> >> >> ~/Apps/mkclean/src/mkclean-0.4.1%
> >> >> >> >> >> >> gdb
> >> >> >> >> >> >> release/gcc_linux_x64/mkclean
> >> >> >> >> >> >> GNU gdb (GDB) 7.1
> >> >> >> >> >> >> Copyright (C) 2010 Free Software Foundation, Inc.
> >> >> >> >> >> >> License GPLv3+: GNU GPL version 3 or later
> >> >> >> >> >> >> <http://gnu.org/licenses/gpl.html>
> >> >> >> >> >> >> This is free software: you are free to change and
> >> >> >> >> >> >> redistribute
> >> >> >> >> >> >> it.
> >> >> >> >> >> >> There is NO WARRANTY, to the extent permitted by law.
>  Type
> >> >> >> >> >> >> "show
> >> >> >> >> >> >> copying"
> >> >> >> >> >> >> and "show warranty" for details.
> >> >> >> >> >> >> This GDB was configured as "x86_64-unknown-linux-gnu".
> >> >> >> >> >> >> For bug reporting instructions, please see:
> >> >> >> >> >> >> <http://www.gnu.org/software/gdb/bugs/>...
> >> >> >> >> >> >> Reading symbols from
> >> >> >> >> >> >>
> >> >> >> >> >> >>
> >> >> >> >> >> >>
> >> >> >> >> >> >>
> >> >> >> >> >> >>
> >> >> >> >> >> >>
> >> >> >> >> >> >>
> /home/julroy67/Apps/mkclean/src/mkclean-0.4.1/release/gcc_linux_x64/mkclean...done.
> >> >> >> >> >> >> (gdb) run --optimize --remux Test.mkv Test.mkv.2
> >> >> >> >> >> >> Starting program:
> >> >> >> >> >> >>
> >> >> >> >> >> >>
> >> >> >> >> >> >>
> >> >> >> >> >> >>
> >> >> >> >> >> >>
> >> >> >> >> >> >>
> >> >> >> >> >> >>
> /home/julroy67/Apps/mkclean/src/mkclean-0.4.1/release/gcc_linux_x64/mkclean
> >> >> >> >> >> >> --optimize --remux Test.mkv Test.mkv.2
> >> >> >> >> >> >> [Thread debugging using libthread_db enabled]
> >> >> >> >> >> >>
> >> >> >> >> >> >> Program received signal SIGSEGV, Segmentation fault.
> >> >> >> >> >> >> 0x000000000040180e in ProjectSettings (p=0x7fffffffdc10)
> at
> >> >> >> >> >> >> mkclean_stdafx.c:99
> >> >> >> >> >> >> 99
> >> >> >> >> >> >>
> >> >> >> >> >> >>
> >> >> >> >> >> >>
> >> >> >> >> >> >>
> >> >> >> >> >> >>
> >> >> >> >> >> >>
>  Node_SetData((node*)p,NODECONTEXT_PROJECT_NAME,TYPE_STRING,PROJECT_NAME);
> >> >> >> >> >> >>
> >> >> >> >> >> >> or see here :
> >> >> >> >> >> >> http://julroy67.free.fr/DL/mkclean_crash_backtrace.log
> >> >> >> >> >> >>
> >> >> >> >> >> >> So anyone can say what I've to do ?
> >> >> >> >> >> >>
> >> >> >> >> >> >> Thanks.
> >> >> >> >> >> >> _______________________________________________
> >> >> >> >> >> >> Matroska-users mailing list
> >> >> >> >> >> >> [email protected]
> >> >> >> >> >> >>
> >> >> >> >> >> >>
> >> >> >> >> >> >>
> http://lists.matroska.org/cgi-bin/mailman/listinfo/matroska-users
> >> >> >> >> >> >> Read Matroska-Users on GMane:
> >> >> >> >> >> >> http://dir.gmane.org/gmane.comp.multimedia.matroska.user
> >> >> >> >> >> >
> >> >> >> >> >> >
> >> >> >> >> >> > _______________________________________________
> >> >> >> >> >> > Matroska-users mailing list
> >> >> >> >> >> > [email protected]
> >> >> >> >> >> >
> >> >> >> >> >> >
> >> >> >> >> >> >
> http://lists.matroska.org/cgi-bin/mailman/listinfo/matroska-users
> >> >> >> >> >> > Read Matroska-Users on GMane:
> >> >> >> >> >> > http://dir.gmane.org/gmane.comp.multimedia.matroska.user
> >> >> >> >> >> >
> >> >> >> >> >> >
> >> >> >> >> >> _______________________________________________
> >> >> >> >> >> Matroska-users mailing list
> >> >> >> >> >> [email protected]
> >> >> >> >> >>
> >> >> >> >> >>
> http://lists.matroska.org/cgi-bin/mailman/listinfo/matroska-users
> >> >> >> >> >> Read Matroska-Users on GMane:
> >> >> >> >> >> http://dir.gmane.org/gmane.comp.multimedia.matroska.user
> >> >> >> >> >
> >> >> >> >> >
> >> >> >> >> > _______________________________________________
> >> >> >> >> > Matroska-users mailing list
> >> >> >> >> > [email protected]
> >> >> >> >> >
> >> >> >> >> >
> http://lists.matroska.org/cgi-bin/mailman/listinfo/matroska-users
> >> >> >> >> > Read Matroska-Users on GMane:
> >> >> >> >> > http://dir.gmane.org/gmane.comp.multimedia.matroska.user
> >> >> >> >> >
> >> >> >> >> >
> >> >> >> >> _______________________________________________
> >> >> >> >> Matroska-users mailing list
> >> >> >> >> [email protected]
> >> >> >> >>
> http://lists.matroska.org/cgi-bin/mailman/listinfo/matroska-users
> >> >> >> >> Read Matroska-Users on GMane:
> >> >> >> >> http://dir.gmane.org/gmane.comp.multimedia.matroska.user
> >> >> >> >
> >> >> >> >
> >> >> >> > _______________________________________________
> >> >> >> > Matroska-users mailing list
> >> >> >> > [email protected]
> >> >> >> >
> http://lists.matroska.org/cgi-bin/mailman/listinfo/matroska-users
> >> >> >> > Read Matroska-Users on GMane:
> >> >> >> > http://dir.gmane.org/gmane.comp.multimedia.matroska.user
> >> >> >> >
> >> >> >> >
> >> >> >> _______________________________________________
> >> >> >> Matroska-users mailing list
> >> >> >> [email protected]
> >> >> >> http://lists.matroska.org/cgi-bin/mailman/listinfo/matroska-users
> >> >> >> Read Matroska-Users on GMane:
> >> >> >> http://dir.gmane.org/gmane.comp.multimedia.matroska.user
> >> >> >
> >> >> >
> >> >> > _______________________________________________
> >> >> > Matroska-users mailing list
> >> >> > [email protected]
> >> >> > http://lists.matroska.org/cgi-bin/mailman/listinfo/matroska-users
> >> >> > Read Matroska-Users on GMane:
> >> >> > http://dir.gmane.org/gmane.comp.multimedia.matroska.user
> >> >> >
> >> >> >
> >> >> _______________________________________________
> >> >> Matroska-users mailing list
> >> >> [email protected]
> >> >> http://lists.matroska.org/cgi-bin/mailman/listinfo/matroska-users
> >> >> Read Matroska-Users on GMane:
> >> >> http://dir.gmane.org/gmane.comp.multimedia.matroska.user
> >> >
> >> >
> >> > _______________________________________________
> >> > Matroska-users mailing list
> >> > [email protected]
> >> > http://lists.matroska.org/cgi-bin/mailman/listinfo/matroska-users
> >> > Read Matroska-Users on GMane:
> >> > http://dir.gmane.org/gmane.comp.multimedia.matroska.user
> >> >
> >> >
> >> _______________________________________________
> >> Matroska-users mailing list
> >> [email protected]
> >> http://lists.matroska.org/cgi-bin/mailman/listinfo/matroska-users
> >> Read Matroska-Users on GMane:
> >> http://dir.gmane.org/gmane.comp.multimedia.matroska.user
> >
> >
> > _______________________________________________
> > Matroska-users mailing list
> > [email protected]
> > http://lists.matroska.org/cgi-bin/mailman/listinfo/matroska-users
> > Read Matroska-Users on GMane:
> > http://dir.gmane.org/gmane.comp.multimedia.matroska.user
> >
> >
> _______________________________________________
> Matroska-users mailing list
> [email protected]
> http://lists.matroska.org/cgi-bin/mailman/listinfo/matroska-users
> Read Matroska-Users on GMane:
> http://dir.gmane.org/gmane.comp.multimedia.matroska.user
>

_______________________________________________
Matroska-users mailing list
[email protected]
http://lists.matroska.org/cgi-bin/mailman/listinfo/matroska-users
Read Matroska-Users on GMane: http://dir.gmane.org/gmane.comp.multimedia.matroska.user