Re: Mkclean sigsev on a specific file

Thanks, you helped making this release better and find more issues in both
softwares :)

On Sun, Jul 18, 2010 at 12:45 AM, julroy67 <[email protected]> wrote:

> Sorry for the delay, but now, with this new release, it is finally fixed.
>
> Really, good work ! :)
> Thanks
>
> 2010/7/17 Steve Lhomme <[email protected]>:
> > I released new versions of both tools. They should now build more easily
> out
> > of the box on Linux, including x64 variants.
> > http://dl.matroska.org/downloads/mkvalidator/mkvalidator-0.1.11.tar.bz2
> > http://dl.matroska.org/downloads/mkclean/mkclean-0.4.2.tar.bz2
> >
> > On Sat, Jul 17, 2010 at 12:37 AM, Steve Lhomme <[email protected]>
> wrote:
> >>
> >> I already reported the problem to Handbrake. It's a low priority bug for
> >> them.
> >> I already fixed a bug that looks like this. Can you do another SVN
> >> checkout to make sure you're using the right value ?
> >>
> >> On Fri, Jul 16, 2010 at 8:38 PM, julroy67 <[email protected]> wrote:
> >>>
> >>> Nice, good to hear it, thanks. But now, shall I report this to the
> >>> handbrake devs ? And second one, I trie the svn version, and it seems
> >>> to work, but now it is a libc segfault :
> >>> http://julroy67.free.fr/DL/bt_libc.log :(
> >>>
> >>> But still thanks for the fix.
> >>>
> >>> 2010/7/16 Steve Lhomme <[email protected]>:
> >>> > Hi again,
> >>> > I've identified the problem. It seems that Handbrake is writing a CRC
> >>> > element at the wrong location (second element of SegmentInfo) and
> with
> >>> > the
> >>> > wrong size (12 instead of 4). That made mkclean behave
> inconsistently.
> >>> > I've
> >>> > identified other possible problems in mkclean and they are all fixed
> in
> >>> > SVN.
> >>> > I am not going to make a release today as I have other things I want
> to
> >>> > put
> >>> > in the next one (hopefully this week-end).
> >>> > If you don't want to wait for the next release, you can get the
> latest
> >>> > sources from SVN
> >>> >
> >>> > at
> https://matroska.svn.sourceforge.net/svnroot/matroska/trunk/foundation_src
> >>> > You will need to copy <root>/mkclean/default_config.h into
> >>> > <root>/config.h
> >>> > before running "coremake gcc_linux_x64"
> >>> > Steve
> >>> > On Fri, Jul 16, 2010 at 4:41 PM, julroy67 <[email protected]>
> wrote:
> >>> >>
> >>> >> Ok, here is the dump http://julroy67.free.fr/DL/TGBS_4925_dump_1M(«
> >>> >> dd if=Test.mkv of=TGBS_4925_dump_1M bs=1M count=1 » should be
> >>> >> correct).
> >>> >>
> >>> >> 2010/7/16 Steve Lhomme <[email protected]>:
> >>> >> > OK that all looks correct. Can you cut the first 1 or 2 first MB
> of
> >>> >> > the
> >>> >> > file
> >>> >> > and send them to me ?
> >>> >> >
> >>> >> > On Fri, Jul 16, 2010 at 4:30 PM, julroy67 <[email protected]>
> >>> >> > wrote:
> >>> >> >>
> >>> >> >> Yes, it plays fine (VLC and Mplayer at least). The mkvinfo simple
> >>> >> >> output : http://julroy67.free.fr/DL/TGBS_4925_mkvinfo.txt
> >>> >> >>
> >>> >> >> 2010/7/16 Steve Lhomme <[email protected]>:
> >>> >> >> > OK it seems your file has no (found) Tracks. Does it play
> >>> >> >> > correctly ?
> >>> >> >> > It's
> >>> >> >> > not normal for a file that big to have no Tracks (it's possible
> >>> >> >> > for
> >>> >> >> > files
> >>> >> >> > with only chapters or attachments). And theoretically the code
> >>> >> >> > should
> >>> >> >> > exit
> >>> >> >> > before the crash, as there is a check to see if there are
> Cluster
> >>> >> >> > but
> >>> >> >> > no
> >>> >> >> > matching Tracks. So I don't know how you are getting to that
> >>> >> >> > point.
> >>> >> >> > Can you send me the output of mkvinfo on that file ? You can
> use
> >>> >> >> > pastebin or
> >>> >> >> > that same web server you used.
> >>> >> >> > Thanks,
> >>> >> >> > Steve
> >>> >> >> >
> >>> >> >> > On Fri, Jul 16, 2010 at 3:50 PM, julroy67 <[email protected]>
> >>> >> >> > wrote:
> >>> >> >> >>
> >>> >> >> >> Here is the nice full output :
> >>> >> >> >> http://julroy67.free.fr/DL/mkclean_full_backtrace.log
> >>> >> >> >>
> >>> >> >> >> Sending the file can be made, but they all are over 1 Gb, the
> >>> >> >> >> smallest
> >>> >> >> >> is 1.2 Gb and would take a long time to upload if so.
> >>> >> >> >>
> >>> >> >> >> 2010/7/16 Steve Lhomme <[email protected]>:
> >>> >> >> >> > Can you get a bigger backtrace, up to the main() if possible
> ?
> >>> >> >> >> > Is
> >>> >> >> >> > it
> >>> >> >> >> > possible to get one of the files that crash (the smallest) ?
> >>> >> >> >> >
> >>> >> >> >> > On Fri, Jul 16, 2010 at 3:26 PM, julroy67 <
> [email protected]>
> >>> >> >> >> > wrote:
> >>> >> >> >> >>
> >>> >> >> >> >> So, better, than before. The first version, with a clean
> >>> >> >> >> >> build,
> >>> >> >> >> >> crashes like the arch package, same output. And now for the
> >>> >> >> >> >> debug
> >>> >> >> >> >> version, the real output (I have missed up something in the
> >>> >> >> >> >> other
> >>> >> >> >> >> version, that crashed at startup) :
> >>> >> >> >> >>
> >>> >> >> >> >> 15:23 julroy67@momoko-laptop ~/Apps/mkclean/mkclean-0.4.1%
> >>> >> >> >> >> gdb
> >>> >> >> >> >> release/gcc_linux_x64_debug/mkclean
> >>> >> >> >> >> GNU gdb (GDB) 7.1
> >>> >> >> >> >> Copyright (C) 2010 Free Software Foundation, Inc.
> >>> >> >> >> >> License GPLv3+: GNU GPL version 3 or later
> >>> >> >> >> >> <http://gnu.org/licenses/gpl.html>
> >>> >> >> >> >> This is free software: you are free to change and
> >>> >> >> >> >> redistribute
> >>> >> >> >> >> it.
> >>> >> >> >> >> There is NO WARRANTY, to the extent permitted by law.  Type
> >>> >> >> >> >> "show
> >>> >> >> >> >> copying"
> >>> >> >> >> >> and "show warranty" for details.
> >>> >> >> >> >> This GDB was configured as "x86_64-unknown-linux-gnu".
> >>> >> >> >> >> For bug reporting instructions, please see:
> >>> >> >> >> >> <http://www.gnu.org/software/gdb/bugs/>...
> >>> >> >> >> >> Reading symbols from
> >>> >> >> >> >>
> >>> >> >> >> >>
> >>> >> >> >> >>
> >>> >> >> >> >>
> >>> >> >> >> >>
> >>> >> >> >> >>
> /home/julroy67/Apps/mkclean/mkclean-0.4.1/release/gcc_linux_x64_debug/mkclean...done.
> >>> >> >> >> >> (gdb) run --optimize --remux Test.mkv Test.mkv.2
> >>> >> >> >> >> Starting program:
> >>> >> >> >> >>
> >>> >> >> >> >>
> >>> >> >> >> >>
> >>> >> >> >> >>
> >>> >> >> >> >>
> >>> >> >> >> >>
> /home/julroy67/Apps/mkclean/mkclean-0.4.1/release/gcc_linux_x64_debug/mkclean
> >>> >> >> >> >> --optimize --remux Test.mkv Test.mkv.2
> >>> >> >> >> >> [Thread debugging using libthread_db enabled]
> >>> >> >> >> >> Progress 1/3: 100%
> >>> >> >> >> >>
> >>> >> >> >> >> Program received signal SIGSEGV, Segmentation fault.
> >>> >> >> >> >> 0x000000000042b4af in EBML_MasterFindFirstElt (Element=0x0,
> >>> >> >> >> >> Context=0x656ce0, bCreateIfNull=0, SetDefault=0) at
> >>> >> >> >> >> ebmlmaster.c:46
> >>> >> >> >> >> 46          for
> >>> >> >> >> >> (i=EBML_MasterChildren(Element);i;i=EBML_MasterNext(i))
> >>> >> >> >> >>
> >>> >> >> >> >> This one is the good, I think.
> >>> >> >> >> >>
> >>> >> >> >> >> 2010/7/16 Steve Lhomme <[email protected]>:
> >>> >> >> >> >> > Before starting to debug you should try to build it first
> >>> >> >> >> >> > like
> >>> >> >> >> >> > I
> >>> >> >> >> >> > just
> >>> >> >> >> >> > described you. Using the available source package
> >>> >> >> >> >> >
> >>> >> >> >> >> >
> >>> >> >> >> >> >
> >>> >> >> >> >> > here:
> http://dl.matroska.org/downloads/mkclean/mkclean-0.4.1.tar.bz2
> >>> >> >> >> >> > I don't know about archlinux and how you got that package
> >>> >> >> >> >> > and
> >>> >> >> >> >> > who
> >>> >> >> >> >> > made
> >>> >> >> >> >> > it.
> >>> >> >> >> >> > So I don't know what it contains and if it's correct.
> >>> >> >> >> >> > mkclean
> >>> >> >> >> >> > doesn't
> >>> >> >> >> >> > use
> >>> >> >> >> >> > the usual autoconf/automake system found on Linux, so
> maybe
> >>> >> >> >> >> > it
> >>> >> >> >> >> > was
> >>> >> >> >> >> > packaged
> >>> >> >> >> >> > incorrectly.
> >>> >> >> >> >> > If you manage to build it like I said and it still fails,
> >>> >> >> >> >> > you
> >>> >> >> >> >> > can
> >>> >> >> >> >> > try
> >>> >> >> >> >> > to
> >>> >> >> >> >> > rebuild it with debug informations like this:
> >>> >> >> >> >> > ./coremake distclean
> >>> >> >> >> >> > ./coremake gcc_linux_x64_debug
> >>> >> >> >> >> >
> >>> >> >> >> >> > Steve
> >>> >> >> >> >> > On Fri, Jul 16, 2010 at 3:05 PM, julroy67
> >>> >> >> >> >> > <[email protected]>
> >>> >> >> >> >> > wrote:
> >>> >> >> >> >> >>
> >>> >> >> >> >> >> Mhh I don't know if I'm correctly generating the debug
> >>> >> >> >> >> >> version
> >>> >> >> >> >> >> of
> >>> >> >> >> >> >> mkclean, could you say me step by step how to it. To be
> >>> >> >> >> >> >> clear,
> >>> >> >> >> >> >> I'm
> >>> >> >> >> >> >> using archlinux, and archlinux AUR package of mkclean,
> it
> >>> >> >> >> >> >> works
> >>> >> >> >> >> >> for
> >>> >> >> >> >> >> most of the file, but for at least 2 of them, it crashes
> >>> >> >> >> >> >> as
> >>> >> >> >> >> >> this
> >>> >> >> >> >> >> :
> >>> >> >> >> >> >>
> >>> >> >> >> >> >> 14:59 julroy67@momoko-laptop ~% mkclean --optimize
> --remux
> >>> >> >> >> >> >> Test.mkv
> >>> >> >> >> >> >> Test.mkv.2
> >>> >> >> >> >> >> Progress 1/3: 100%
> >>> >> >> >> >> >> zsh: segmentation fault  mkclean --optimize --remux
> >>> >> >> >> >> >> Test.mkv
> >>> >> >> >> >> >> Test.mkv.2
> >>> >> >> >> >> >>
> >>> >> >> >> >> >> And it seems that the debug binary that I've generated
> >>> >> >> >> >> >> crashes
> >>> >> >> >> >> >> always,
> >>> >> >> >> >> >> so I'm doing wrong, but still, mkclean has a error
> >>> >> >> >> >> >> somewhere
> >>> >> >> >> >> >> ^^'
> >>> >> >> >> >> >> So
> >>> >> >> >> >> >> to
> >>> >> >> >> >> >> be sure to do correctly, I think, a step by step
> debugging
> >>> >> >> >> >> >> guide
> >>> >> >> >> >> >> would
> >>> >> >> >> >> >> help. Sorry for the hassle.
> >>> >> >> >> >> >>
> >>> >> >> >> >> >> 2010/7/16 Steve Lhomme <[email protected]>:
> >>> >> >> >> >> >> > Hi.
> >>> >> >> >> >> >> > Given the nature of the crash, it looks like it should
> >>> >> >> >> >> >> > always
> >>> >> >> >> >> >> > crash
> >>> >> >> >> >> >> > as
> >>> >> >> >> >> >> > that
> >>> >> >> >> >> >> > error is on the init. It may have to do with linux x64
> >>> >> >> >> >> >> > rather
> >>> >> >> >> >> >> > than
> >>> >> >> >> >> >> > 32
> >>> >> >> >> >> >> > bits.
> >>> >> >> >> >> >> > I'll give it a try on my side.
> >>> >> >> >> >> >> > Or did you compile it with a 32 bits tool chain ? The
> >>> >> >> >> >> >> > regular
> >>> >> >> >> >> >> > bootstrap.sh
> >>> >> >> >> >> >> > and subsequent "make" command are building for 32
> bits.
> >>> >> >> >> >> >> > In
> >>> >> >> >> >> >> > 0.4.2
> >>> >> >> >> >> >> > that
> >>> >> >> >> >> >> > should
> >>> >> >> >> >> >> > be released soon I changed that and there is now a
> >>> >> >> >> >> >> > "configure"
> >>> >> >> >> >> >> > script.
> >>> >> >> >> >> >> > It
> >>> >> >> >> >> >> > will build the makefiles for 64 bits architecture on
> 64
> >>> >> >> >> >> >> > bits
> >>> >> >> >> >> >> > ones...
> >>> >> >> >> >> >> > Meanwhile you can make sure or that by running that in
> >>> >> >> >> >> >> > the
> >>> >> >> >> >> >> > root
> >>> >> >> >> >> >> > folder
> >>> >> >> >> >> >> > of
> >>> >> >> >> >> >> > the sources:
> >>> >> >> >> >> >> > ./coremake distclean
> >>> >> >> >> >> >> > ./coremake gcc_linux_x64
> >>> >> >> >> >> >> > Then you run "make -C mkclean" and it should work.
> >>> >> >> >> >> >> >
> >>> >> >> >> >> >> > On Fri, Jul 16, 2010 at 2:41 PM, julroy67
> >>> >> >> >> >> >> > <[email protected]>
> >>> >> >> >> >> >> > wrote:
> >>> >> >> >> >> >> >>
> >>> >> >> >> >> >> >> Hello,
> >>> >> >> >> >> >> >>
> >>> >> >> >> >> >> >> I'm using mkclean to clean up my mkv files that are
> for
> >>> >> >> >> >> >> >> the
> >>> >> >> >> >> >> >> most
> >>> >> >> >> >> >> >> not
> >>> >> >> >> >> >> >> valid as mkvalidate says, but on certain files,
> mkclean
> >>> >> >> >> >> >> >> crashes.
> >>> >> >> >> >> >> >> I've
> >>> >> >> >> >> >> >> managed to get the backtrace from gdb. But I'm not
> sure
> >>> >> >> >> >> >> >> where
> >>> >> >> >> >> >> >> I
> >>> >> >> >> >> >> >> have
> >>> >> >> >> >> >> >> to report the issue.
> >>> >> >> >> >> >> >>
> >>> >> >> >> >> >> >> For the backtrace here's it :
> >>> >> >> >> >> >> >>
> >>> >> >> >> >> >> >> 14:30 julroy67@momoko-laptop
> >>> >> >> >> >> >> >> ~/Apps/mkclean/src/mkclean-0.4.1%
> >>> >> >> >> >> >> >> gdb
> >>> >> >> >> >> >> >> release/gcc_linux_x64/mkclean
> >>> >> >> >> >> >> >> GNU gdb (GDB) 7.1
> >>> >> >> >> >> >> >> Copyright (C) 2010 Free Software Foundation, Inc.
> >>> >> >> >> >> >> >> License GPLv3+: GNU GPL version 3 or later
> >>> >> >> >> >> >> >> <http://gnu.org/licenses/gpl.html>
> >>> >> >> >> >> >> >> This is free software: you are free to change and
> >>> >> >> >> >> >> >> redistribute
> >>> >> >> >> >> >> >> it.
> >>> >> >> >> >> >> >> There is NO WARRANTY, to the extent permitted by law.
> >>> >> >> >> >> >> >>  Type
> >>> >> >> >> >> >> >> "show
> >>> >> >> >> >> >> >> copying"
> >>> >> >> >> >> >> >> and "show warranty" for details.
> >>> >> >> >> >> >> >> This GDB was configured as
> "x86_64-unknown-linux-gnu".
> >>> >> >> >> >> >> >> For bug reporting instructions, please see:
> >>> >> >> >> >> >> >> <http://www.gnu.org/software/gdb/bugs/>...
> >>> >> >> >> >> >> >> Reading symbols from
> >>> >> >> >> >> >> >>
> >>> >> >> >> >> >> >>
> >>> >> >> >> >> >> >>
> >>> >> >> >> >> >> >>
> >>> >> >> >> >> >> >>
> >>> >> >> >> >> >> >>
> >>> >> >> >> >> >> >>
> >>> >> >> >> >> >> >>
> /home/julroy67/Apps/mkclean/src/mkclean-0.4.1/release/gcc_linux_x64/mkclean...done.
> >>> >> >> >> >> >> >> (gdb) run --optimize --remux Test.mkv Test.mkv.2
> >>> >> >> >> >> >> >> Starting program:
> >>> >> >> >> >> >> >>
> >>> >> >> >> >> >> >>
> >>> >> >> >> >> >> >>
> >>> >> >> >> >> >> >>
> >>> >> >> >> >> >> >>
> >>> >> >> >> >> >> >>
> >>> >> >> >> >> >> >>
> >>> >> >> >> >> >> >>
> /home/julroy67/Apps/mkclean/src/mkclean-0.4.1/release/gcc_linux_x64/mkclean
> >>> >> >> >> >> >> >> --optimize --remux Test.mkv Test.mkv.2
> >>> >> >> >> >> >> >> [Thread debugging using libthread_db enabled]
> >>> >> >> >> >> >> >>
> >>> >> >> >> >> >> >> Program received signal SIGSEGV, Segmentation fault.
> >>> >> >> >> >> >> >> 0x000000000040180e in ProjectSettings
> >>> >> >> >> >> >> >> (p=0x7fffffffdc10) at
> >>> >> >> >> >> >> >> mkclean_stdafx.c:99
> >>> >> >> >> >> >> >> 99
> >>> >> >> >> >> >> >>
> >>> >> >> >> >> >> >>
> >>> >> >> >> >> >> >>
> >>> >> >> >> >> >> >>
> >>> >> >> >> >> >> >>
> >>> >> >> >> >> >> >>
> >>> >> >> >> >> >> >>
>  Node_SetData((node*)p,NODECONTEXT_PROJECT_NAME,TYPE_STRING,PROJECT_NAME);
> >>> >> >> >> >> >> >>
> >>> >> >> >> >> >> >> or see here :
> >>> >> >> >> >> >> >>
> http://julroy67.free.fr/DL/mkclean_crash_backtrace.log
> >>> >> >> >> >> >> >>
> >>> >> >> >> >> >> >> So anyone can say what I've to do ?
> >>> >> >> >> >> >> >>
> >>> >> >> >> >> >> >> Thanks.
> >>> >> >> >> >> >> >> _______________________________________________
> >>> >> >> >> >> >> >> Matroska-users mailing list
> >>> >> >> >> >> >> >> [email protected]
> >>> >> >> >> >> >> >>
> >>> >> >> >> >> >> >>
> >>> >> >> >> >> >> >>
> >>> >> >> >> >> >> >>
> http://lists.matroska.org/cgi-bin/mailman/listinfo/matroska-users
> >>> >> >> >> >> >> >> Read Matroska-Users on GMane:
> >>> >> >> >> >> >> >>
> >>> >> >> >> >> >> >>
> http://dir.gmane.org/gmane.comp.multimedia.matroska.user
> >>> >> >> >> >> >> >
> >>> >> >> >> >> >> >
> >>> >> >> >> >> >> > _______________________________________________
> >>> >> >> >> >> >> > Matroska-users mailing list
> >>> >> >> >> >> >> > [email protected]
> >>> >> >> >> >> >> >
> >>> >> >> >> >> >> >
> >>> >> >> >> >> >> >
> >>> >> >> >> >> >> >
> http://lists.matroska.org/cgi-bin/mailman/listinfo/matroska-users
> >>> >> >> >> >> >> > Read Matroska-Users on GMane:
> >>> >> >> >> >> >> >
> http://dir.gmane.org/gmane.comp.multimedia.matroska.user
> >>> >> >> >> >> >> >
> >>> >> >> >> >> >> >
> >>> >> >> >> >> >> _______________________________________________
> >>> >> >> >> >> >> Matroska-users mailing list
> >>> >> >> >> >> >> [email protected]
> >>> >> >> >> >> >>
> >>> >> >> >> >> >>
> >>> >> >> >> >> >>
> http://lists.matroska.org/cgi-bin/mailman/listinfo/matroska-users
> >>> >> >> >> >> >> Read Matroska-Users on GMane:
> >>> >> >> >> >> >>
> http://dir.gmane.org/gmane.comp.multimedia.matroska.user
> >>> >> >> >> >> >
> >>> >> >> >> >> >
> >>> >> >> >> >> > _______________________________________________
> >>> >> >> >> >> > Matroska-users mailing list
> >>> >> >> >> >> > [email protected]
> >>> >> >> >> >> >
> >>> >> >> >> >> >
> >>> >> >> >> >> >
> http://lists.matroska.org/cgi-bin/mailman/listinfo/matroska-users
> >>> >> >> >> >> > Read Matroska-Users on GMane:
> >>> >> >> >> >> > http://dir.gmane.org/gmane.comp.multimedia.matroska.user
> >>> >> >> >> >> >
> >>> >> >> >> >> >
> >>> >> >> >> >> _______________________________________________
> >>> >> >> >> >> Matroska-users mailing list
> >>> >> >> >> >> [email protected]
> >>> >> >> >> >>
> >>> >> >> >> >>
> http://lists.matroska.org/cgi-bin/mailman/listinfo/matroska-users
> >>> >> >> >> >> Read Matroska-Users on GMane:
> >>> >> >> >> >> http://dir.gmane.org/gmane.comp.multimedia.matroska.user
> >>> >> >> >> >
> >>> >> >> >> >
> >>> >> >> >> > _______________________________________________
> >>> >> >> >> > Matroska-users mailing list
> >>> >> >> >> > [email protected]
> >>> >> >> >> >
> >>> >> >> >> >
> http://lists.matroska.org/cgi-bin/mailman/listinfo/matroska-users
> >>> >> >> >> > Read Matroska-Users on GMane:
> >>> >> >> >> > http://dir.gmane.org/gmane.comp.multimedia.matroska.user
> >>> >> >> >> >
> >>> >> >> >> >
> >>> >> >> >> _______________________________________________
> >>> >> >> >> Matroska-users mailing list
> >>> >> >> >> [email protected]
> >>> >> >> >>
> >>> >> >> >>
> http://lists.matroska.org/cgi-bin/mailman/listinfo/matroska-users
> >>> >> >> >> Read Matroska-Users on GMane:
> >>> >> >> >> http://dir.gmane.org/gmane.comp.multimedia.matroska.user
> >>> >> >> >
> >>> >> >> >
> >>> >> >> > _______________________________________________
> >>> >> >> > Matroska-users mailing list
> >>> >> >> > [email protected]
> >>> >> >> >
> http://lists.matroska.org/cgi-bin/mailman/listinfo/matroska-users
> >>> >> >> > Read Matroska-Users on GMane:
> >>> >> >> > http://dir.gmane.org/gmane.comp.multimedia.matroska.user
> >>> >> >> >
> >>> >> >> >
> >>> >> >> _______________________________________________
> >>> >> >> Matroska-users mailing list
> >>> >> >> [email protected]
> >>> >> >>
> http://lists.matroska.org/cgi-bin/mailman/listinfo/matroska-users
> >>> >> >> Read Matroska-Users on GMane:
> >>> >> >> http://dir.gmane.org/gmane.comp.multimedia.matroska.user
> >>> >> >
> >>> >> >
> >>> >> > _______________________________________________
> >>> >> > Matroska-users mailing list
> >>> >> > [email protected]
> >>> >> > http://lists.matroska.org/cgi-bin/mailman/listinfo/matroska-users
> >>> >> > Read Matroska-Users on GMane:
> >>> >> > http://dir.gmane.org/gmane.comp.multimedia.matroska.user
> >>> >> >
> >>> >> >
> >>> >> _______________________________________________
> >>> >> Matroska-users mailing list
> >>> >> [email protected]
> >>> >> http://lists.matroska.org/cgi-bin/mailman/listinfo/matroska-users
> >>> >> Read Matroska-Users on GMane:
> >>> >> http://dir.gmane.org/gmane.comp.multimedia.matroska.user
> >>> >
> >>> >
> >>> > _______________________________________________
> >>> > Matroska-users mailing list
> >>> > [email protected]
> >>> > http://lists.matroska.org/cgi-bin/mailman/listinfo/matroska-users
> >>> > Read Matroska-Users on GMane:
> >>> > http://dir.gmane.org/gmane.comp.multimedia.matroska.user
> >>> >
> >>> >
> >>> _______________________________________________
> >>> Matroska-users mailing list
> >>> [email protected]
> >>> http://lists.matroska.org/cgi-bin/mailman/listinfo/matroska-users
> >>> Read Matroska-Users on GMane:
> >>> http://dir.gmane.org/gmane.comp.multimedia.matroska.user
> >>
> >
> >
> > _______________________________________________
> > Matroska-users mailing list
> > [email protected]
> > http://lists.matroska.org/cgi-bin/mailman/listinfo/matroska-users
> > Read Matroska-Users on GMane:
> > http://dir.gmane.org/gmane.comp.multimedia.matroska.user
> >
> >
> _______________________________________________
> Matroska-users mailing list
> [email protected]
> http://lists.matroska.org/cgi-bin/mailman/listinfo/matroska-users
> Read Matroska-Users on GMane:
> http://dir.gmane.org/gmane.comp.multimedia.matroska.user
>

_______________________________________________
Matroska-users mailing list
[email protected]
http://lists.matroska.org/cgi-bin/mailman/listinfo/matroska-users
Read Matroska-Users on GMane: http://dir.gmane.org/gmane.comp.multimedia.matroska.user