Re: [www-dev] Re: building svl failed

On 3/2/11, Yan Wu <[email protected]> wrote:
>>
>> hmm, still have no idea, the call to cpp/rscpp is not shown...
>> please try the following:
>> first apply the attached patch (to give -verbose flag to rsc)
>> then rebuild rsc:
>>  (cd rsc && rm -r wntmsci* && build debug=t && deliver)
>> then try again, it should now print the arguments that don't work
>>
> The call to cpp/rsccpp is still not shown after applying the patch and
> rebuilding rsc. The error log is:
>
>
> $ make -r
> [ build DEP ] SRS:svl/res
> f:/DEV300_m100/svl/source/misc/m
> ediatyp.src C:\Documents and Settings\wuyan\174.tmp
> Preprocessor startline:  f:/DEV300_m100/solver/300/wntmsci12.pro/bin/rscpp
> @C:\D
> ocuments and Settings\wuyan\175.tmp
> cpp: line 0, Error: Too many file arguments.  Usage: cpp [input [output]]
> @C:\Documents: Invalid argument
> cpp: line 0, Error: Can't open input file "@C:\Documents"
> Error starting preprocessor
> make: ***
> [/cygdrive/f/DEV300_m100/solver/300/wntmsci12.pro/workdir/SrsPartTarge
> t/svl/source/misc/mediatyp.src] error 1
>
It caused by the blanks in the temp path "C:\Documents and Settings\".
 As the idea from Carsten suggested, I set environment viable TEMP and
TMP to "C:/cygwin/tmp" and building svl succeeded.
Thanks a lot for your help, Michael and Carsten.

Regards,
Yan
--