[Mac OS X] Very close with OOo 2.0 build on Jaguar

Dear Folks,

Over the past week or so, off and on, I have been trying to build OOo 2.0
(more specifically 1.9m97) in Mac OS X 10.2.x Jaguar.

I have had to make a few fixes, and a couple of hack workarounds for the
moment, but it finished building today.

Unfortunately the build failed while putting together the installation
(instsetoo_native), with the following error (from the
"instsetoo_native/unxmacxp.pro/OpenOffice/logging/en-US/log_SRC680_en-US.log" fi
le) :

######################################################
Registering python UNO components:
######################################################
SUCCESS: Source for types.rdb:
/Volumes/MacintoshHD/ooo_2.0/solver/680/unxmacxp.pro/bin/types.rdb
SUCCESS: Source for pyuno_services.rdb:
/Volumes/MacintoshHD/ooo_2.0/solver/680/unxmacxp.pro/bin/pyuno_services.rdb
Systemcall:
/Volumes/MacintoshHD/ooo_2.0/solver/680/unxmacxp.pro/bin/regcomp -register
-br /Volumes/MacintoshHD/ooo_2.0/solver/680/unxmacxp.pro/bin/types.rdb -br
/Volumes/MacintoshHD/ooo_2.0/solver/680/unxmacxp.pro/bin/pyuno_services.rdb
-r
/Volumes/MacintoshHD/ooo_2.0/instsetoo_native/unxmacxp.pro/OpenOffice/services.r
db/en-US_inprogress_1/services.rdb -c vnd.openoffice.pymodule:pythonscript
-l com.sun.star.loader.Python 2>&1 |
register component 'vnd.openoffice.pymodule:pythonscript' in registry
'/Volumes/MacintoshHD/ooo_2.0/instsetoo_native/unxmacxp.pro/OpenOffice/services.
rdb/en-US_inprogress_1/services.rdb' failed!
error (RuntimeException): python-loader:exceptions.ImportError: dynamic
module does not define init function (initpyuno), traceback follows
Couldn't find uno._uno_extract_printable_stacktrace
ERROR:  /Volumes/MacintoshHD/ooo_2.0/solver/680/unxmacxp.pro/bin/regcomp
-register -br
/Volumes/MacintoshHD/ooo_2.0/solver/680/unxmacxp.pro/bin/types.rdb -br
/Volumes/MacintoshHD/ooo_2.0/solver/680/unxmacxp.pro/bin/pyuno_services.rdb
-r
/Volumes/MacintoshHD/ooo_2.0/instsetoo_native/unxmacxp.pro/OpenOffice/services.r
db/en-US_inprogress_1/services.rdb -c vnd.openoffice.pymodule:pythonscript
-l com.sun.star.loader.Python 2>&1 |

Moved directory from
/Volumes/MacintoshHD/ooo_2.0/instsetoo_native/unxmacxp.pro/OpenOffice/services.r
db/en-US_inprogress_1 to
/Volumes/MacintoshHD/ooo_2.0/instsetoo_native/unxmacxp.pro/OpenOffice/services.r
db/en-US_witherror_1

Removing directory
/Volumes/MacintoshHD/ooo_2.0/instsetoo_native/unxmacxp.pro/OpenOffice/zipfiles/e
n-US

Removing directory
/Volumes/MacintoshHD/ooo_2.0/instsetoo_native/unxmacxp.pro/OpenOffice/services.r
db/en-US_witherror_1

***************************************************************
ERROR: Could not register all components!
in function: create_services_rdb
***************************************************************



I'm not a Python user, so I don't know how to debug this problem. The code
is executing Python 2.3.4 that was built in OOo (successfully).

The only thing I can think is one of the files I had to patch to compile
was "odk/source/unoapploader/unx/unoapploader.c", and I temporarily
conditionalized out the Linux specific code that used the "dlxxx" routines.

Any clues as to how I might go about debugging this problem?


Regards, Terry