Re: [cups] Fwd: Re: Problem with lpadmin

On Mon, 2022-02-21 at 21:16 +0100, Axel Braun wrote:
> Hello Ken,
> 
> Am Montag, 21. Februar 2022, 20:56:32 CET schrieben Sie:
> > Guten Tag, Axel!
> 
> Ah, speaking german, very nice :-)
> 
> > > 
> > > Betreff: Re: [cups] Problem with lpadmin
> > > Datum: Sonntag, 20. Februar 2022, 09:33:16 CET
> > > Von: Axel Braun <[email protected]>
> > > An: [email protected]
> > > 
> > > Hello Ken,
> > > 
> > > Am Sonntag, 20. Februar 2022, 02:43:07 CET schrieb Ken Wright:
> > > > I entered the following command:
> > > > 
> > > > lpadmin -p LaserJet_M15a -E -D "White Printer" -L "On Dad's desk"
> > > > -m
> > > > drv:///hpcups.drv/hp-laserjet_m14-m17.ppd -o printer-is-
> > > > shared=true -
> > > > v
> > > > usb://HP/LaserJet%20m14-M17?serial=VNBR14066
> > > 
> > > You double-checked all options?
> > > lpinfo -v
> > 
> > ~$ lpinfo -v
> > network ipp
> > network http
> > network https
> > file cups-brf:/
> > network ipps
> > network lpd
> > network socket
> > network beh
> > serial serial:/dev/ttyS4?baud=115200
> > serial serial:/dev/ttyS5?baud=115200
> > direct usb://HP/LaserJet%20M14-M17?serial=VNB3R14066
> 
> Did you notice that the connection string is slightly different to what
> you
> used?

$ lpadmin -p LaserJet_M15a -E -D "White Printer" -L "On Dad's desk" -m
everywhere -o printer-is-shared=true -v usb://HP/LaserJet%20m14-
M17?serial=VNBR14066
lpadmin: Unable to connect to "HP:0": Name or service not known
$ lpadmin -p LaserJet_M15a -E -D "White Printer" -L "On Dad's desk" -m
everywhere -o printer-is-shared=true -v hp:/usb/HP_LaserJet_M14-
M17?serial=VNBR14066
lpadmin: Unable to connect to ":0": Name or service not known

Both the connection strings return "unable to connect" messages.

> > direct hp:/usb/HP_LaserJet_M14-M17?serial=VNB3R14066
> > direct parallel:/dev/lp0
> > direct hpfax
> > network dnssd://HP%20LaserJet%20Professional%20P1102w._pdl-
> > datastream._tcp.local/
> > network ipp://HP%20LaserJet%20Professional%20P1102w._ipp._tcp.local/
> > 
> > > lpinfo --make-and-model "HP LaserJet" -m
> > 
> > Too many to copy here!
> > 
> > > > and the printer shows in the CUPS web interface, but when I try
> > > > to
> > > > print a test page nothing happens.
> > > > 
> > > > Any suggestions welcome!
> > > 
> > > increase the loglevel, e.g. to
> > > LogLevel debug
> > > in /etc/cups/cupsd.conf, restart cups and try again. Then check the
> > > log
> > > output
> > 
> > $ tail /var/log/cups/error_log
> > D [21/Feb/2022:14:53:48 -0500] cupsdMarkDirty(---J-)
> > D [21/Feb/2022:14:53:48 -0500] cupsdSetBusyState: newbusy="Printing
> > jobs and dirty files", busy="Dirty files"
> > D [21/Feb/2022:14:53:48 -0500] cupsdMarkDirty(----S)
> > D [21/Feb/2022:14:53:48 -0500] cupsdSetBusyState: newbusy="Printing
> > jobs and dirty files", busy="Printing jobs and dirty files"
> > D [21/Feb/2022:14:53:48 -0500] [Job 6] Restoring USB device
> > configuration: 1 -> 2
> > D [21/Feb/2022:14:53:48 -0500] [Notifier] state=3
> > D [21/Feb/2022:14:53:48 -0500] [Notifier] PrinterStateChanged
> > D [21/Feb/2022:14:53:48 -0500] [Job 6] Failed to set configuration 2
> > for 03f0:be2a
> 
> Thats probably the line.
> This is loglevel debug? I would expect it to be more verbose...
> 
> You should post this to the CUPS list. No idea why my message did not
> go through...got a 'message delivery delayed' notice form one of the
> Apple servers (the rotten one ;-)
> 
> Cheers
> Axel
> 
> 


_______________________________________________
cups mailing list
[email protected]
https://lists.cups.org/mailman/listinfo/cups