Re: [cups] Problem with cups selecting manual tray on HP laserjet
Steinar Bang <[email protected]> Wed, 14 Dec 2022 23:19:32 +0100
| Newsgroups | gmane.comp.printing.cups.general |
|---|---|
| Message-ID | <[email protected]> |
>>>>> Helge Blischke <helgeblischke-S0/[email protected]>: > Thanks for the pretty long list. In alll the attribute listings > therein, I didn’t find anything concerning the input bin(s), and even > the job options listed didn’t mention the input bin or things like > „manual feed“. Ok, thanks! (This is pretty much what I've found when I've looked for bins or trays, which has confused me...) > But the several instances denoting the PPD generation only stated that > the printer’s PPD has been generated fromm the IPP attributes > requested from the printer, but no details. Ah, ok...? So the PPD comes from the printer? I didn't know that. I saw that the PPDs must be created from something, since all changes I made to the file was overwritten, but I couldn't find a source for the change. > Even when looking into the sources from cups-browsed and the > driverless utility (using a fairly recent source) I found nothing > concerning the input bin(s). > To shorten the procedure, could you please do the following: > — shut down the printer, so that the printer queue and the printer’s PPD get deleted by cups. Ok, /etc/cups/ppd before and it contained a .ppd file, and after the printer had been switched off, /etc/cups/ppd was empty > — switch on the printer again > and possibly print a test file Switched the printer back on, and the file /etc/cups/ppd/HP_Color_LaserJet_Pro_M252dw_501595_.ppd was created: https://gist.github.com/steinarb/30c413c5a274472bcada19ddf6b4cf3b I printed a test file, and after the print, the /etc/cups/ppd/HP_Color_LaserJet_Pro_M252dw_501595_.ppd file looked like this: https://gist.github.com/steinarb/abdb46361d31db2918a692f51ff68ab0 > — save the printer’s PPD /from /etc/cups/ppd/HP_Color_Laserjet_Pro_M252dw_nnnn_.ppd) > where nnnn is a ID number generated by the PPD generator > and send it to me. The PPD as created just after switching the printer back can be found in the first gist above, and the PPD after printing a test file can be found in the second gist above. Note: The test page was printed from the regular tray, and was not waiting for a sheet to be fed into the manual slot. _______________________________________________ cups mailing list [email protected] https://lists.cups.org/mailman/listinfo/cups