Re: F5 BigIP Stats

Since you're not using mrtg, I should also point out that the :2 on
the end of the OID indicates an snmp v2 query.  These OIDs didn't work
if queried v1.

Frank

Frank Smith wrote:
> Bill Blackford wrote:
>> I don't post on this list much so I hope this is the right forum.
>>
>> Is there a way on the F5 LTM V9.4.5  look at total throughput on a per/VIP
>> basis? It would be really nice to graph this with RRD.
>>
>> Thanks,
>>
>> -b
>>
> 
> Here's a template I use for MRTG, doing a global search and replace on
>  the following strings:
> DEVICE: DNS name for the F5 you're monitoring
> ZZZ:  Virtual IP you want to collect stats on
> COMMUNITY:  snmp community string with read access
> NAME: what you want the IP called (such as www or searchdb)
> 
> The first stanza monitors bits in and out, the second monitors the
> current number of open connections/sec and max open connections/sec.
> 
> Target[DEVICE_NAME-data]: 1.3.6.1.4.1.3375.2.2.10.11.3.1.4.1.4.ZZZ&1.3.6.1.4.1.337
> 5.2.2.10.11.3.1.6.1.4.ZZZ:COMMUNITY@DEVICE:::::2
> SetEnv[DEVICE_NAME-data]: MRTG_INT_IP="" MRTG_INT_DESCR="NAME-data"
> MaxBytes[DEVICE_NAME-data]: 125000000
> Title[DEVICE_NAME-data]: DEVICE NAME pool data
> PageTop[DEVICE_NAME-data]: <H1>NAME data</H1>
>  <TABLE>
>    <TR><TD>System:</TD>     <TD>DEVICE</TD></TR>
>    <TR><TD>Maintainer:</TD> <TD>Frank Smith</TD></TR>
>    <TR><TD>Description:</TD><TD>NAME data  </TD></TR>
>    <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
>    <TR><TD>ifName:</TD>     <TD>NAME data</TD></TR>
>    <TR><TD>Max Speed:</TD>  <TD>125.0 MBytes/s</TD></TR>
>  </TABLE>
> 
> Target[DEVICE_NAME-conn]: 1.3.6.1.4.1.3375.2.2.10.11.3.1.7.1.4.ZZZ&1.3.6.1.4.1.337
> 5.2.2.10.11.3.1.9.1.4.ZZZ:COMMUNITY@DEVICE:::::2
> SetEnv[DEVICE_NAME-conn]: MRTG_INT_IP="" MRTG_INT_DESCR="NAME-conn"
> MaxBytes[DEVICE_NAME-conn]: 99999999999
> Options[DEVICE_NAME-conn]: gauge, noinfo, nopercent
> Title[DEVICE_NAME-conn]: DEVICE NAME pool connections
> PageTop[DEVICE_NAME-conn]: <H1>NAME connections</H1>
>  <TABLE>
>    <TR><TD>System:</TD>     <TD>DEVICE</TD></TR>
>    <TR><TD>Maintainer:</TD> <TD>Frank Smith</TD></TR>
>    <TR><TD>Description:</TD><TD>NAME connections  </TD></TR>
>    <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
>    <TR><TD>ifName:</TD>     <TD>NAME connections</TD></TR>
>    <TR><TD>Max Speed:</TD>  <TD>1250000.0 </TD></TR>
>  </TABLE>
> 
> This works on 9.4.4, I don't know if the OIDs changed on later versions.
> 
> Hope this helps,
> Frank
> 
> 
> 


-- 
Frank Smith                                      [email protected]
Sr. Systems Administrator                       Voice: 512-374-4673
Hoover's Online                                   Fax: 512-374-4501
_______________________________________________
lb-l mailing list
[email protected]
http://vegan.net/mailman/listinfo/lb-l
Searchable Archive: http://vegan.net/lb/archive
http://lbdigest.com Load Balancing Digest
http://lbwiki.com Load Balancing Wiki