Re: pip install scons

I would imagine that if we support a primary install (1) then supporting
local install (3) covers the case of the user needing multiple
installations. I think that package distributions through pip/yum/apt/<etc>
should be left as standard.

On Mon, Mar 28, 2016 at 12:40 AM, Jason Kenny <[email protected]> wrote:

> I think when this came up before there was a desire for three method.
>
>
>
> 1)      Pip install as a primary method. Allow people to depend on it.
>
> 2)      RPM, MSI… cases for people that cannot use pip for firewall
> reasons
>
> 3)      Scons local for cases in which people want to install Scons in a
> more system independent way, such as checking source in internal source
> control, so it just works with need to install on system.
>
>
>
> Supporting 1) correctly allow 2) to work as a side effect of different
> package outputs as I understand.
>
> I think 3) is needed very much.
>
> I am not sure we have a need to support more than on install directly. I
> will defer if someone feels this needs to support, however every case I
> have seen installing one version of SCons is enough. I only ever used more
> than on version of SCons at a time to help me test stuff in Parts. I could
> easily have done this with virtual env as well.
>
>
>
> Jason
>
>
>
> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
> Windows 10
>
>
>
> *From: *Bill Deegan <bill-cJFiu+DHMVC5azolltMz9laTQe2KTcn/@public.gmane.org>
> *Sent: *Friday, March 25, 2016 12:43 PM
>
> *To: *SCons developer list <[email protected]>
> *Subject: *Re: [Scons-dev] pip install scons
>
>
> One question for the user base would be if anyone uses this ability
> anymore?
> If not, good let's drop it.
>
> I'm all for moving to a pip based install as the primary method, with
> scons-local still supported.
> Though perhaps single file scons-local would be useful and/or better?
>
> Thoughts?
> -Bill
>
> On Thu, Mar 24, 2016 at 8:06 AM, Jason Kenny <[email protected]> wrote:
>
> I am unclear on what the direction going forward is for side by side
> installs of SCons.
>
>
>
> I thought there was some talk that multiple version might be supported
> with VirtualEnv.
>
>
>
> Jason
>
>
>
> *From: *anatoly techtonik <[email protected]>
> *Sent: *Wednesday, March 23, 2016 6:41 AM
>
> *To: *SCons developer list <[email protected]>
> *Subject: *Re: [Scons-dev] pip install scons
>
>
> Here is SO bug
> https://stackoverflow.com/questions/14296531/what-does-error-option-single-version-externally-managed-not-recognized-ind
>
> I think that the culprit is that SCons historically allowed to install
> multiple versions of itself side by side. Maybe that's not actual
> anymore?
>
> On Thu, Mar 10, 2016 at 2:01 AM, Jason Kenny <[email protected]> wrote:
> > Ya,
> >
> >
> >
> > So no change.
> >
> >
> >
> > Oddly enough it works on Ubuntu, but fails on Red Hat, and Windows.
> >
> >
> >
> > Jason
> >
> >
> >
> >
> >
> > From: Jason Kenny
> > Sent: Wednesday, March 9, 2016 4:51 PM
> > To: Bill Deegan
> >
> >
> > Cc: SCons developer list
> > Subject: Re: [Scons-dev] pip install scons
> >
> >
> >
> >
> >
> > Bill,
> >
> > I think the point of this is that it is the latest version. Pip 8.1 is
> the
> > latest and it is failing.
> >
> >
> >
> > I will try to see if a reinstall will correct the issues
> >
> >
> >
> > Jason
> >
> >
> >
> >
> >
> > From: Bill Deegan
> > Sent: Wednesday, March 9, 2016 2:30 PM
> > To: Jason Kenny
> > Cc: SCons developer list
> > Subject: Re: [Scons-dev] pip install scons
> >
> >
> >
> > Jason,
> >
> > O.k. I've seen that before, but if you upgrade to latest pip
> > (pip install --upgrade pip)
> > It should install fine.
> >
> > You're issue is covered in bug:
> > http://scons.tigris.org/issues/show_bug.cgi?id=2769
> >
> > I'll take another look at it today if I get a chance.
> > -Bill
> >
> > On Wed, Mar 9, 2016 at 1:59 PM, Jason Kenny <[email protected]> wrote:
> >
> > Hi Bill,
> >
> >
> >
> > One windows and Linux the error is the same…
> >
> >> python --version
> >
> > Python 2.7.10
> >
> >> pip --version
> >
> > pip 8.1.2 from C:\Python27\lib\site-packages (python 2.7)
> >
> >>pip install scons
> >
> > Collecting scons
> >
> >   Using cached scons-2.4.1.tar.gz
> >
> > Installing collected packages: scons
> >
> >   Running setup.py install for scons ... error
> >
> >     Complete output from command c:\python27\python.exe -u -c "import
> > setuptools, tokenize;__file__='c:\\users\\master\\
> >
> >
> appdata\\local\\temp\\pip-build-wv5sur\\scons\\setup.py';exec(compile(getattr(tokenize,
> > 'open', open)(__file__).read().r
> >
> > eplace('\r\n', '\n'), __file__, 'exec'))" install --record
> > c:\users\master\appdata\local\temp\pip-4cj9x2-record\install-
> >
> > record.txt --single-version-externally-managed --compile:
> >
> >     usage: -c [global_opts] cmd1 [cmd1_opts] [cmd2 [cmd2_opts] ...]
> >
> >        or: -c --help [cmd1 cmd2 ...]
> >
> >        or: -c --help-commands
> >
> >        or: -c cmd --help
> >
> >
> >
> >     error: option --single-version-externally-managed not recognized
> >
> >
> >
> >     ----------------------------------------
> >
> > Command "c:\python27\python.exe -u -c "import setuptools,
> > tokenize;__file__='c:\\users\\master\\appdata\\local\\temp\\pi
> >
> > p-build-wv5sur\\scons\\setup.py';exec(compile(getattr(tokenize, 'open',
> > open)(__file__).read().replace('\r\n', '\n'), __
> >
> > file__, 'exec'))" install --record
> > c:\users\master\appdata\local\temp\pip-4cj9x2-record\install-record.txt
> > --single-vers
> >
> > ion-externally-managed --compile" failed with error code 1 in
> > c:\users\master\appdata\local\temp\pip-build-wv5sur\scons\
> >
> >
> >
> > I added in bold what the main error seems to be. I see this for Linux and
> > Windows ( have not tried Mac)
> >
> > Jason
> >
> >
> >
> > Sent from Mail for Windows 10
> >
> >
> >
> > From: Bill Deegan
> > Sent: Wednesday, March 9, 2016 11:08 AM
> > To: SCons developer list
> > Subject: Re: [Scons-dev] pip install scons
> >
> >
> >
> > Jason,
> >
> > As far as I know, if you have an updated version of pip it works.
> > If you're seeing otherwise with current version of SCons, please post
> what
> > errors you're seeing.
> >
> > -Bill
> >
> > On Wed, Mar 9, 2016 at 11:54 AM, Jason Kenny <[email protected]> wrote:
> >
> > HI guys,
> >
> >
> >
> > What is the status of pip install of SCons. I been trying to integrate
> this
> > with Parts, as well use it for some other projects via automating a pip
> > install. On windows and Linux I am having failures.
> >
> >
> >
> > Is anyone else seeing these issue, or is this known to not be stable?
> >
> >
> >
> > Thanks
> >
> > Jason
> >
> >
> >
> >
> > _______________________________________________
> > Scons-dev mailing list
> > [email protected]
> > https://pairlist2.pair.net/mailman/listinfo/scons-dev
> >
> >
> >
> >
> > _______________________________________________
> > Scons-dev mailing list
> > [email protected]
> > https://pairlist2.pair.net/mailman/listinfo/scons-dev
> >
>
>
>
> --
> anatoly t.
> _______________________________________________
> Scons-dev mailing list
> [email protected]
> https://pairlist2.pair.net/mailman/listinfo/scons-dev
>
> _______________________________________________
> Scons-dev mailing list
> [email protected]
> https://pairlist2.pair.net/mailman/listinfo/scons-dev
>
>
>
> _______________________________________________
> Scons-dev mailing list
> [email protected]
> https://pairlist2.pair.net/mailman/listinfo/scons-dev
>
>

_______________________________________________
Scons-dev mailing list
[email protected]
https://pairlist2.pair.net/mailman/listinfo/scons-dev