Re: Error when passing from python 3.5.4 to python 3.6

I tried to make it as small as possible :
https://github.com/peterphonic/scons_qt_example.  It might not be as tiny
as you asked, but I hope small enough.

In this example, scons tries to compile uic_ASREngineWidget.cc, but this
file is not generated because it is not part of the QT_UICCOM tool chain.
SO, scons complain that the file doesn't exist (which is what I am trying
to do!)

At the end, what i'd like to to, is to generate the file
ui_ASREngineWidget.h only.  This is what we were doing with the qt4 and qt5
tools...

You will need a qt 5 folder.  I shared mine with you from one drive :
https://adacelcanada-my.sharepoint.com/:u:/g/personal/pboily_adacel_com/EQcBYZhknBhNqnhV3-dVNRABgF3S3JzjmOhAUEaKIqb3dQ?e=Cfigdy

Le jeu. 23 juill. 2020, à 15 h 02, Pierre-Luc Boily <
[email protected]> a écrit :

> Could you point me out the link please?  On the issues page?
> https://github.com/SCons/scons/issues  ?
>
> Le jeu. 23 juill. 2020, à 14 h 30, Bill Deegan <[email protected]>
> a écrit :
>
>> Can you push up a TINY example to github so we can try running it?
>>
>> On Thu, Jul 23, 2020 at 11:18 AM Pierre-Luc Boily <
>> [email protected]> wrote:
>>
>>> I progressed a bit,
>>>
>>> If I do this :
>>>
>>> env['QT_UICCOM'] = [['$QT_UIC', '$QT_UICDECLFLAGS', '-o',
>>> '${TARGETS[0]}', '$SOURCE']]
>>>
>>> It works a little bit better, the action is not truncated anymore.
>>>
>>> But somehow, somewhere, scons still have the original tool chain with 3
>>> actions.  See traces below :
>>>
>>> scons: Reading SConscript files ...
>>> scons: done reading SConscript files.
>>> scons: Building targets ...
>>> Building build\sr\speech\ASREngineSpawner\ui_ASREngineWidget.h with
>>> action:
>>>   UnlinkFunc(target, source, env)
>>> Building build\sr\speech\ASREngineSpawner\ui_ASREngineWidget.h and
>>> build\sr\speech\ASREngineSpawner\uic_ASREngineWidget.cc and
>>> build\sr\speech\ASREngineSpawner\moc_ASREngineWidget.cc with action:
>>>   $QT_UIC $QT_UICDECLFLAGS -o ${TARGETS[0]} $SOURCE
>>> C:\svn\3rdParty\3rdPartyPackages\Qt-5.12.1_vs2017\5.12.1\msvc2017\bin\uic
>>> -o build\sr\speech\ASREngineSpawner\ui_ASREngineWidget.h
>>> sr\speech\ASREngineSpawner\ASREngineWidget.ui
>>> scons:
>>> `build\sr\speech\ASREngineSpawner\MSVC14.1\x86\release\ASREngineSpawner.obj'
>>> is up to date.
>>> scons: done building targets.
>>>
>>> Even if  ui_ASREngineWidget.h has been generated, the next build is not
>>> up to date, because scons tries to generate  uic_ASREngineWidget.cc, even
>>> if the generation of this file has been removed from  QT_UICCOM.
>>>
>>> Le jeu. 23 juill. 2020, à 08 h 52, Pierre-Luc Boily <
>>> [email protected]> a écrit :
>>>
>>>> scons: Reading SConscript files ...
>>>> scons: done reading SConscript files.
>>>> scons: Building targets ...
>>>> Building build\sr\speech\ASREngineSpawner\ASREngineWidget.h and
>>>> build\sr\speech\ASREngineSpawner\uic_ASREngineWidget.cc and
>>>> build\sr\speech\ASREngineSpawner\moc_ASREngineWidget.cc with action:
>>>>   $QT_BINPATH\uic
>>>>
>>>> C:\svn\3rdParty\3rdPartyPackages\Qt-5.12.1_vs2017\5.12.1\msvc2017\bin\uic
>>>>
>>>> What I am trying to do (override QT_UICCOM ) by doing this :
>>>>
>>>> env['QT_UICCOM'] = env['QT_UICCOM'][0]
>>>>
>>>> is clearly not working
>>>>
>>>>
>>>> Le mer. 22 juill. 2020, à 21 h 06, Bill Deegan <
>>>> [email protected]> a écrit :
>>>>
>>>>> run with --debug=presub and paste
>>>>>
>>>>> On Wed, Jul 22, 2020 at 9:48 AM Pierre-Luc Boily <
>>>>> [email protected]> wrote:
>>>>>
>>>>>> Not the first time and I guess not the last, but I think I don't see
>>>>>> something that should be easy.  From  QT_UICCOM, I only need the first
>>>>>> action.  So, what I try to do is to override  QT_UICCOM with  QT_UICCOM[0],
>>>>>> but this is not working, the uic action is truncated.
>>>>>>
>>>>>> If you look at the trace below,   The result of the print of
>>>>>> QT_UICCOM[0]  is not the same as if I print the whole  QT_UICCOM list. I
>>>>>> mean,  QT_UICCOM  contains commas between arguments.   QT_UICCOM[0]
>>>>>> arguments are not separated by command.  I am suspecting it could be my
>>>>>> problem.
>>>>>>
>>>>>> Traces:
>>>>>> -------------------------------
>>>>>> scons: Reading SConscript files ...
>>>>>>
>>>>>> [['$QT_UIC', '$QT_UICDECLFLAGS', '-o', '${TARGETS[0]}', '$SOURCE'],
>>>>>> ['$QT_UIC', '$QT_UICIMPLFLAGS', '-impl', '${TARGETS[0].file}', '-o',
>>>>>> '${TARGETS[1]}', '$SOURCE'], ['$QT_MOC', '$QT_MOCFROMHFLAGS', '-o',
>>>>>> '${TARGETS[2]}', '${TARGETS[0]}']]
>>>>>>
>>>>>> $QT_UIC $QT_UICDECLFLAGS -o ${TARGETS[0]} $SOURCE
>>>>>>
>>>>>> scons: done reading SConscript files.
>>>>>> scons: Building targets ...
>>>>>> C:\svn\3rdParty\3rdPartyPackages\Qt-5.12.1_vs2017\5.12.1\msvc2017\bin\uic
>>>>>> UIC_ARG_IS_MISSING_HERE
>>>>>> ---------------------------------
>>>>>>
>>>>>>
>>>>>> Code :
>>>>>>
>>>>>> print('')
>>>>>> print(env['QT_UICCOM'])
>>>>>> print('')
>>>>>> print(env['QT_UICCOM'][0])
>>>>>> print('')
>>>>>>
>>>>>> env['QT_UICCOM'] = env['QT_UICCOM'][0]
>>>>>>
>>>>>> lib_tgt = env.Library(target='lib',
>>>>>>                       source=['ASREngineSpawner.cpp', 'ProcessManager.cpp', 'ASREngineWidget.ui'])
>>>>>>
>>>>>>
>>>>>> Le mar. 21 juill. 2020, à 19 h 34, Bill Deegan <
>>>>>> [email protected]> a écrit :
>>>>>>
>>>>>>> Yes.
>>>>>>> Change it in your Environment() in your SConstruct/SConscripts..
>>>>>>>
>>>>>>> On Tue, Jul 21, 2020 at 1:16 PM Pierre-Luc Boily <
>>>>>>> [email protected]> wrote:
>>>>>>>
>>>>>>>> The problem is still there with scons 4.0.1, but I decided to use
>>>>>>>> qt tool that ships with scons.  I was not even aware of this, we were using
>>>>>>>> the external tool since forever....
>>>>>>>>
>>>>>>>> But I still do have a weird problem.  It looks like scons Uic does
>>>>>>>> something that I don't need, the -impl option.  It looks like it is not
>>>>>>>> part of the Uic application that ships with my version of qt.  Is there a
>>>>>>>> way to remove the --impl from 'QT_UICCOM': ?
>>>>>>>>
>>>>>>>> scons: done reading SConscript files.
>>>>>>>> scons: Building targets ...
>>>>>>>> C:\svn\3rdParty\3rdPartyPackages\Qt-5.12.1_vs2017\5.12.1\msvc2017\bin\uic
>>>>>>>> -o build\sr\speech\ASREngineSpawner\ASREngineWidget.h
>>>>>>>> sr\speech\ASREngineSpawner\ASREngineWidget.ui
>>>>>>>> C:\svn\3rdParty\3rdPartyPackages\Qt-5.12.1_vs2017\5.12.1\msvc2017\bin\uic
>>>>>>>> -impl ASREngineWidget.h -o
>>>>>>>> build\sr\speech\ASREngineSpawner\uic_ASREngineWidget.cc
>>>>>>>> sr\speech\ASREngineSpawner\ASREngineWidget.ui
>>>>>>>> Unknown option 'impl'.
>>>>>>>> scons: *** [build\sr\speech\ASREngineSpawner\ASREngineWidget.h]
>>>>>>>> Error 1
>>>>>>>> scons: building terminated because of errors.
>>>>>>>> PS C:\SVN\products\faa_mx\integ-newScons.4.0>
>>>>>>>> PS C:\SVN\products\faa_mx\integ-newScons.4.0>
>>>>>>>> PS C:\SVN\products\faa_mx\integ-newScons.4.0>
>>>>>>>> PS C:\SVN\products\faa_mx\integ-newScons.4.0>
>>>>>>>> PS C:\SVN\products\faa_mx\integ-newScons.4.0>
>>>>>>>> PS C:\SVN\products\faa_mx\integ-newScons.4.0>
>>>>>>>> C:\svn\3rdParty\3rdPartyPackages\Qt-5.12.1_vs2017\5.12.1\msvc2017\bin\uic
>>>>>>>> -help
>>>>>>>> Usage:
>>>>>>>> C:\svn\3rdParty\3rdPartyPackages\Qt-5.12.1_vs2017\5.12.1\msvc2017\bin\uic.exe
>>>>>>>> [options] [uifile]
>>>>>>>> Qt User Interface Compiler version 5.12.1
>>>>>>>>
>>>>>>>> Options:
>>>>>>>>   -?, -h, --help                Displays this help.
>>>>>>>>   -v, --version                 Displays version information.
>>>>>>>>   -d, --dependencies            Display the dependencies.
>>>>>>>>   -o, --output <file>           Place the output into <file>
>>>>>>>>   -p, --no-protection           Disable header protection.
>>>>>>>>   -n, --no-implicit-includes    Disable generation of
>>>>>>>> #include-directives.
>>>>>>>>   -s, --no-stringliteral        Deprecated. The use of this option
>>>>>>>> won't take
>>>>>>>>                                 any effect.
>>>>>>>>   --postfix <postfix>           Postfix to add to all generated
>>>>>>>> classnames.
>>>>>>>>   --tr, --translate <function>  Use <function> for i18n.
>>>>>>>>   --include <include-file>      Add #include <include-file> to
>>>>>>>> <file>.
>>>>>>>>   -g, --generator <java|cpp>    Select generator.
>>>>>>>>   --idbased                     Use id based function for i18n
>>>>>>>>
>>>>>>>> Le lun. 20 juill. 2020, à 23 h 45, Pierre-Luc Boily <
>>>>>>>> [email protected]> a écrit :
>>>>>>>>
>>>>>>>>> Thx.  Ill try with scons 4 and with the qt tool that ships with
>>>>>>>>> scons.  Let you know...
>>>>>>>>>
>>>>>>>>> Le lun. 20 juill. 2020, à 08 h 37, Thomas Berg <
>>>>>>>>> [email protected]> a écrit :
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Sat, 18 Jul 2020 at 00:35, Pierre-Luc Boily <
>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>
>>>>>>>>>>> I was pretty sure the problem was in qt5 tool and not in scons ?
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>> That could very well be, but volunteers who devote their spare
>>>>>>>>>> time to help may have a policy to only start helping you when you have
>>>>>>>>>> upgraded to the latest version. In general it avoids wasting time on
>>>>>>>>>> already solved issues.
>>>>>>>>>>
>>>>>>>>>> It could be that upgrading doesn't help, but things may also have
>>>>>>>>>> happened in SCons that could affect this. If you still see the problem
>>>>>>>>>> after upgrading you'll likely get the help you need.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>> File
>>>>>>>>>>> "C:\SVN\3rdParty\devTool\site_scons\site_tools\qt5_init.py", line 373:
>>>>>>>>>>> cpp, cpp_contents, out_sources)
>>>>>>>>>>> File
>>>>>>>>>>> "C:\SVN\3rdParty\devTool\site_scons\site_tools\qt5_init.py", line 229:
>>>>>>>>>>> if cpp and re.search(inc_moc_cpp, cpp_contents, re.M):
>>>>>>>>>>> File "C:\Python\Python3.6.8\lib\re.py", line 182:
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>> Regarding the error, it's similar to an issue I saw myself when
>>>>>>>>>> switching to python 3. SCons has two ways to get the content of a file, one
>>>>>>>>>> returns text (python unicode), and the other returns bytes. If that's the
>>>>>>>>>> problem, swapping out calls to get_contents() with get_text_contents()
>>>>>>>>>> might help in the tool source code.
>>>>>>>>>>
>>>>>>>>>> I see you are using an external qt tool instead of the one that
>>>>>>>>>> ships with scons. I think the qt tool that ships with scons supports Qt5
>>>>>>>>>> now, so you could consider trying it instead of this possibly unmaintained
>>>>>>>>>> tool.
>>>>>>>>>>
>>>>>>>>>> Cheers,
>>>>>>>>>> Thomas
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Sat, 18 Jul 2020 at 00:35, Pierre-Luc Boily <
>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>
>>>>>>>>>>> I was pretty sure the problem was in qt5 tool and not in scons ?
>>>>>>>>>>>
>>>>>>>>>>> File
>>>>>>>>>>> "C:\SVN\3rdParty\devTool\site_scons\site_tools\qt5_init.py", line 373:
>>>>>>>>>>> cpp, cpp_contents, out_sources)
>>>>>>>>>>> File
>>>>>>>>>>> "C:\SVN\3rdParty\devTool\site_scons\site_tools\qt5_init.py", line 229:
>>>>>>>>>>> if cpp and re.search(inc_moc_cpp, cpp_contents, re.M):
>>>>>>>>>>> File "C:\Python\Python3.6.8\lib\re.py", line 182:
>>>>>>>>>>>
>>>>>>>>>>> Le ven. 17 juill. 2020, à 15 h 48, Bill Deegan <
>>>>>>>>>>> [email protected]> a écrit :
>>>>>>>>>>>
>>>>>>>>>>>> Please update your SCons version to 4.0.1 and retry.
>>>>>>>>>>>> Note if you've installed scons via pip, you  should pip
>>>>>>>>>>>> uninstall scons, and then pip install scons as there's a windows specific
>>>>>>>>>>>> pip+scons issue.
>>>>>>>>>>>>
>>>>>>>>>>>> On Fri, Jul 17, 2020 at 9:09 AM Pierre-Luc Boily <
>>>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Hello,
>>>>>>>>>>>>>
>>>>>>>>>>>>> Sorry to post this here, this is not direclty linked to scons,
>>>>>>>>>>>>> but to qt5
>>>>>>>>>>>>> tools.  I thought that maybe someone faced this problem before
>>>>>>>>>>>>> in the scons
>>>>>>>>>>>>> code.
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> https://bitbucket.org/dirkbaechle/scons_qt5/issues/14/from-python-354-to-368-raise-sourceerror
>>>>>>>>>>>>>
>>>>>>>>>>>>> python : 3.6.8
>>>>>>>>>>>>> scons : 3.0.5
>>>>>>>>>>>>> os : windows 10
>>>>>>>>>>>>>
>>>>>>>>>>>>> Trying to update my python from 3.5.4 to 3.6.8 version and I
>>>>>>>>>>>>> stumbled on the
>>>>>>>>>>>>> exception below. I found something similar to this page :
>>>>>>>>>>>>>
>>>>>>>>>>>>> https://stackoverflow.com/questions/58328587/python-3-7-4-re-error-bad-escape-s-at-position-0
>>>>>>>>>>>>> .
>>>>>>>>>>>>> but I don`t understand... :
>>>>>>>>>>>>>
>>>>>>>>>>>>> PS C:\SVN\products\faa_mx\integ> scons -n
>>>>>>>>>>>>> scons: Reading SConscript files ...
>>>>>>>>>>>>> error: bad escape \m at position 37:
>>>>>>>>>>>>> File "C:\SVN\products\faa_mx\integ\SConstruct", line 30:
>>>>>>>>>>>>> sc_manager.build()
>>>>>>>>>>>>> File
>>>>>>>>>>>>>
>>>>>>>>>>>>> "C:\SVN\products\faa_mx\integ\cm\env\scons\utilities\sconscriptManager.py",
>>>>>>>>>>>>> line 44:
>>>>>>>>>>>>> duplicate=0)
>>>>>>>>>>>>> File
>>>>>>>>>>>>>
>>>>>>>>>>>>> "c:\python\python3.6.8\lib\site-packages\scons\SCons\Script\SConscript.py",
>>>>>>>>>>>>> line 668:
>>>>>>>>>>>>> return method(*args, **kw)
>>>>>>>>>>>>> File
>>>>>>>>>>>>>
>>>>>>>>>>>>> "c:\python\python3.6.8\lib\site-packages\scons\SCons\Script\SConscript.py",
>>>>>>>>>>>>> line 605:
>>>>>>>>>>>>> return _SConscript(self.fs, files, **subst_kw)
>>>>>>>>>>>>> File
>>>>>>>>>>>>>
>>>>>>>>>>>>> "c:\python\python3.6.8\lib\site-packages\scons\SCons\Script\SConscript.py",
>>>>>>>>>>>>> line 286:
>>>>>>>>>>>>> exec(compile(scriptdata, scriptname, 'exec'),
>>>>>>>>>>>>> call_stack[-1].globals)
>>>>>>>>>>>>> File
>>>>>>>>>>>>>
>>>>>>>>>>>>> "C:\SVN\products\faa_mx\integ\sr\speech\ASREngineSpawner\ASREngineSpawner.sc",
>>>>>>>>>>>>> line 12:
>>>>>>>>>>>>> lib_tgt = env.build_library(envService,
>>>>>>>>>>>>> ['ASREngineSpawner.cpp',
>>>>>>>>>>>>> 'ProcessManager.cpp'] + env.Glob('.ui'))
>>>>>>>>>>>>> File
>>>>>>>>>>>>>
>>>>>>>>>>>>> "C:\SVN\products\faa_mx\integ\cm\env\scons\adacelBuilders\pseudoBuilders.py",
>>>>>>>>>>>>> line 95:
>>>>>>>>>>>>> source=tgt)
>>>>>>>>>>>>> File
>>>>>>>>>>>>> "c:\python\python3.6.8\lib\site-packages\scons\SCons\Environment.py",
>>>>>>>>>>>>> line 260:
>>>>>>>>>>>>> return MethodWrapper.call(self, target, source, *args, **kw)
>>>>>>>>>>>>> File
>>>>>>>>>>>>> "c:\python\python3.6.8\lib\site-packages\scons\SCons\Environment.py",
>>>>>>>>>>>>> line 224:
>>>>>>>>>>>>> return self.method(*nargs, **kwargs)
>>>>>>>>>>>>> File
>>>>>>>>>>>>> "c:\python\python3.6.8\lib\site-packages\scons\SCons\Builder.py", line
>>>>>>>>>>>>> 645:
>>>>>>>>>>>>> return self.execute(env, target, source, OverrideWarner(kw),
>>>>>>>>>>>>> ekw)
>>>>>>>>>>>>> File
>>>>>>>>>>>>> "c:\python\python3.6.8\lib\site-packages\scons\SCons\Builder.py", line
>>>>>>>>>>>>> 564:
>>>>>>>>>>>>> tlist, slist = self.create_nodes(env, target, source)
>>>>>>>>>>>>> File
>>>>>>>>>>>>> "c:\python\python3.6.8\lib\site-packages\scons\SCons\Builder.py", line
>>>>>>>>>>>>> 528:
>>>>>>>>>>>>> target, source = self.emitter(target=tlist, source=slist,
>>>>>>>>>>>>> env=env)
>>>>>>>>>>>>> File
>>>>>>>>>>>>> "c:\python\python3.6.8\lib\site-packages\scons\SCons\Builder.py", line
>>>>>>>>>>>>> 353:
>>>>>>>>>>>>> target, source = e(target, source, env)
>>>>>>>>>>>>> File
>>>>>>>>>>>>> "C:\SVN\3rdParty\devTool\site_scons\site_tools\qt5_init.py", line 373:
>>>>>>>>>>>>> cpp, cpp_contents, out_sources)
>>>>>>>>>>>>> File
>>>>>>>>>>>>> "C:\SVN\3rdParty\devTool\site_scons\site_tools\qt5_init.py", line 229:
>>>>>>>>>>>>> if cpp and re.search(inc_moc_cpp, cpp_contents, re.M):
>>>>>>>>>>>>> File "C:\Python\Python3.6.8\lib\re.py", line 182:
>>>>>>>>>>>>> return _compile(pattern, flags).search(string)
>>>>>>>>>>>>> File "C:\Python\Python3.6.8\lib\re.py", line 301:
>>>>>>>>>>>>> p = sre_compile.compile(pattern, flags)
>>>>>>>>>>>>> File "C:\Python\Python3.6.8\lib\sre_compile.py", line 562:
>>>>>>>>>>>>> p = sre_parse.parse(p, flags)
>>>>>>>>>>>>> File "C:\Python\Python3.6.8\lib\sre_parse.py", line 855:
>>>>>>>>>>>>> p = _parse_sub(source, pattern, flags & SRE_FLAG_VERBOSE, 0)
>>>>>>>>>>>>> File "C:\Python\Python3.6.8\lib\sre_parse.py", line 416:
>>>>>>>>>>>>> not nested and not items))
>>>>>>>>>>>>> File "C:\Python\Python3.6.8\lib\sre_parse.py", line 502:
>>>>>>>>>>>>> code = _escape(source, this, state)
>>>>>>>>>>>>> File "C:\Python\Python3.6.8\lib\sre_parse.py", line 401:
>>>>>>>>>>>>> raise source.error("bad escape %s" % escape, len(escape))
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>>> Sent from:
>>>>>>>>>>>>> http://scons.1086193.n5.nabble.com/Users-f16930.html
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> Scons-users mailing list
>>>>>>>>>>>>> [email protected]
>>>>>>>>>>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>>>>>>>>>>
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> Scons-users mailing list
>>>>>>>>>>>> [email protected]
>>>>>>>>>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> Scons-users mailing list
>>>>>>>>>>> [email protected]
>>>>>>>>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> Scons-users mailing list
>>>>>>>>>> [email protected]
>>>>>>>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>> Scons-users mailing list
>>>>>>>> [email protected]
>>>>>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Scons-users mailing list
>>>>>>> [email protected]
>>>>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>>>>
>>>>>> _______________________________________________
>>>>>> Scons-users mailing list
>>>>>> [email protected]
>>>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>>>
>>>>> _______________________________________________
>>>>> Scons-users mailing list
>>>>> [email protected]
>>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>>
>>>> _______________________________________________
>>> Scons-users mailing list
>>> [email protected]
>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>
>> _______________________________________________
>> Scons-users mailing list
>> [email protected]
>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>
>

_______________________________________________
Scons-users mailing list
[email protected]
https://pairlist4.pair.net/mailman/listinfo/scons-users