Re: parallel to serial
Edward Vidal <[email protected]> Fri, 15 Jan 2016 17:45:27 +0000 (UTC)
| Newsgroups | gmane.comp.python.myhdl |
|---|---|
| Message-ID | <[email protected]> |
Hello All,I can not believe that 3 lines are such a problem.This t.next = (temp[36:35]) generates t <= temp(36-1 downto 35)(0);which does not appear correct. This is what I t <= temp(35); This t.next = int(temp[36:35]) generates t <= stdl(to_integer(temp(36-1 downto 35)));which I believe might be okay. This temp[36:1].next = temp[35:0] generates temp(36-1 downto 1) <= temp(35-1 downto 0);which be taking the lower 34 bits to upper 34 of temp. I am using @always(clk.posedge) could this be the problem? https://gist.github.com/develone/77732a2a1ab452e5f1f8 python gistfile1.txt --test does not perform the desired results.python gistfile1.txt --convert generates the Verilog & VHDL files Thanks for all the help. Edward Vidal Jr. e-mail [email protected] 915-595-1613 On Friday, January 15, 2016 1:16 AM, Jan Decaluwe <[email protected]> wrote: Also, why not assign single bits to indices instead of slices, like in the VHDL? On 15/01/16 03:58, Christopher Felton wrote: > Edward, > > When assign intbv bit slices you need to: > > temp.next[1:0] = 0 > > Hope that helps, > Chris > > On 1/14/16 8:26 PM, Edward Vidal wrote: >> Hello All, >> I found this VHDL code on the web. >> library ieee; >> use ieee.std_logic_1164.all; >> >> entity piso is >> port( >> clk,load : in std_logic; >> pi : in std_logic_vector(35 downto 0); >> so : out std_logic); >> end piso; >> >> architecture arch of piso is >> >> signal t : std_logic; >> signal temp: std_logic_vector(35 downto 0); >> >> begin >> >> process (clk,pi,load) >> begin >> if (load='1') then >> temp(35 downto 0) <= pi(35 downto 0); >> elsif (CLK'event and CLK='1') then >> t <= temp(35); >> temp(35 downto 1) <= temp(34 downto 0); >> temp(0) <= '0'; >> end if; >> end process; >> >> so <= t; >> >> end arch; >> I create a test bench in ise and it appears to be okay. >> from myhdl import * >> import argparse >> W0 = 36 >> pp0 = Signal(intbv(0)[W0:]) >> ss0 = Signal(bool(0)) >> clk = Signal(bool(0)) >> ld = Signal(bool(0)) >> def cliparse(): >> parser = argparse.ArgumentParser() >> parser.add_argument("--build", default=False, action='store_true') >> parser.add_argument("--test", default=False, action='store_true') >> parser.add_argument("--convert", default=False, action='store_true') >> args = parser.parse_args() >> return args >> >> def para2ser(clk, pp0, ss0, ld): >> >> t = Signal(bool(0)) >> temp = Signal(intbv(0)[W0:]) >> @always(clk.posedge) >> def logic(): >> >> if (ld == 1): >> temp[36:0].next = pp0[36:0] >> else: >> t.next = int(temp[36:35]) >> >> temp[36:1].next = temp[35:0] >> temp[1:].next = int(0) >> ss0.next = t >> >> return logic >> >> def tb(clk, pp0, ss0, ld): >> instance_1 = para2ser(clk, pp0, ss0, ld) >> >> @always(delay(10)) >> def clkgen(): >> clk.next = not clk >> @instance >> def stimulus(): >> >> pp0.next = 34359738368 >> yield clk.posedge >> ld.next = 1 >> yield clk.posedge >> ld.next = 0 >> yield clk.posedge >> print ("%s %d") % (bin(pp0,36), ss0 ) >> for i in range(36): >> yield clk.posedge >> print ("%d %s %d") % (i, bin(pp0,36), ss0 ) >> raise StopSimulation >> >> return instances() >> def convert(args): >> toVHDL(para2ser,clk, pp0, ss0, ld) >> toVerilog(para2ser,clk, pp0, ss0, ld) >> >> >> def main(): >> args = cliparse() >> if args.test: >> tb_fsm = traceSignals(tb,clk, pp0, ss0, ld) >> sim = Simulation(tb_fsm) >> sim.run() >> if args.convert: >> convert(args) >> >> if __name__ == '__main__': >> main() >> Can someone tell me what I am doing wrong? >> I think it this line >> temp[1:].next = int(0) >> I have tried without the int and I get the same results when I run >> python para2ser.py --test >> Thanks >> Regards, >> Edward Vidal Jr. e-mail [email protected] 915-595-1613 >> >> >> ------------------------------------------------------------------------------ >> Site24x7 APM Insight: Get Deep Visibility into Application Performance >> APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month >> Monitor end-to-end web transactions and take corrective actions now >> Troubleshoot faster and improve end-user experience. Signup Now! >> http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140 >> >> >> >> _______________________________________________ >> myhdl-list mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/myhdl-list >> > > > > ------------------------------------------------------------------------------ > Site24x7 APM Insight: Get Deep Visibility into Application Performance > APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month > Monitor end-to-end web transactions and take corrective actions now > Troubleshoot faster and improve end-user experience. Signup Now! > http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140 > -- Jan Decaluwe - Resources bvba - http://www.jandecaluwe.com Python as a HDL: http://www.myhdl.org VHDL development, the modern way: http://www.sigasi.com World-class digital design: http://www.easics.com ------------------------------------------------------------------------------ Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140 _______________________________________________ myhdl-list mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/myhdl-list ------------------------------------------------------------------------------ Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140 _______________________________________________ myhdl-list mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/myhdl-list