Re: Running it on different machines

Ok I guess it has to do with the fact that the 2 networks have different
address ranges. The Ubuntu machine does not have wireless so it is
connected with a cable to my Mac. The Mac has a wireless address in the
10.0.1.x range.
My Windows machine also has an address in this range, and it works
perfectly from there. If I start the name server there I see it on the Mac.


Bedankt weer!

Richard


2013/10/19 Irmen de Jong <[email protected]>

> On 19-10-2013 9:16, Richard van Bemmelen wrote:
> > I started the name server on my Ubuntu machine with -n host_name.
> > (BTW, the manual is a bit confusing here, because it seems that the host
> name can be an
> > arbitrary string, but that does not work. I just put the ip address
> here, and that was
> > accepted).
> >
> > But now trying to locate the name server from my Mac fails.
> > It gives : "failed to locate the nameserver".
>
> For nameserver discovery to work, the machines need to be able to send and
> receive UDP
> broadcast packets. Make sure you start a broadcast responder with the name
> server, and
> that the UDP packets aren't filtered by a router or firewall.
>
> The manual tells you that the UDP broadcast responder will only be started
> if the
> hostname that the name server binds on, is different than the loopback
> adapter. You can
> see if it is started or not by looking at the text that is printed when
> the name server
> starts. It should read something like this:
>
> [D:\]py -m Pyro4.naming -n neptune
> Broadcast server running on 0.0.0.0:9091
> NS running on neptune:9090 (192.168.178.27)
> URI = PYRO:Pyro.NameServer@neptune:9090
>
>
> Depending on your network configuration you may need to also use the
> --bchost and/or
> --bcport options to change the address the broadcast responder listens on.
> The default
> as printed above works fine on my simple LAN.
>
>
>
> > I can ping both machines, although there are in a different address
> range.
>
> Being able to ping is not enough; UDP broadcast packets are different.
> When they are in
> a different address range, there's usually a gateway/router involved, and
> usually, these
> don't relay UDP broadcast packets across segments.
>
>
> Irmen
>
>
>
> ------------------------------------------------------------------------------
> October Webinars: Code for Performance
> Free Intel webinars can help you accelerate application performance.
> Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most
> from
> the latest Intel processors and coprocessors. See abstracts and register >
> http://pubads.g.doubleclick.net/gampad/clk?id=60135031&iu=/4140/ostg.clktrk
> _______________________________________________
> Pyro-core mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/pyro-core
>

------------------------------------------------------------------------------
October Webinars: Code for Performance
Free Intel webinars can help you accelerate application performance.
Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from 
the latest Intel processors and coprocessors. See abstracts and register >
http://pubads.g.doubleclick.net/gampad/clk?id=60135031&iu=/4140/ostg.clktrk

_______________________________________________
Pyro-core mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/pyro-core