Re: Pyro4 Flame SSH Reverse Tunneling

I gonna check that but what i find weard is is working with Standard Pyro object i use port 8999 for flame and 9000- 9009 for standard who is suppost to be free..

Thank !
Ne manquez pas notre <Symposium 2014 : LE rendez-vous des g?ants en TI> le mardi 28 octobre prochain ? l'h?tel Ch?teau Laurier!
Inscrivez-vous d?s maintenant : www.ebr.ca/evenements/symposiumqc2014<http://www.ebr.ca/evenements/symposiumqc2014>

[cid:logodedfd9]

Martin Lapointe
Technicien
[email protected]


Informatique EBR Inc.
365, rue Racine Est, Bureau 204
Chicoutimi (Qc) G7H 1S8
T?l.:(418) 543-2600 # 2119
Sans frais: 1 (800) 567-2336
Fax : (418) 543-0363
http://www.ebr.ca

P  Devez-vous vraiment imprimer ce courriel? Pensez ? l'environnement...
Ce message est confidentiel et est ? l'usage exclusif de son destinataire.  Il est strictement interdit ? toute autre personne de le diffuser, le distribuer ou le reproduire.  Si le destinataire ne peut ?tre joint ou vous est inconnu, veuillez informer l'exp?diteur par courrier ?lectronique imm?diatement et effacer ce message et en d?truire toute copie.


________________________________
De : F.C <[email protected]>
Envoy? : 2 octobre 2014 08:44
? : Pyro mailing list
Objet : Re: [Pyro] Pyro4 Flame SSH Reverse Tunneling

Ah ok,

looks like ok for your configuration!!!! i couldn't yet help you more, but try to verify your firewall status for outgoing or incoming protocoles and ports, maybe your firewall is blocking it....

2014-10-02 8:37 GMT-04:00 Martin Lapointe <[email protected]<mailto:[email protected]>>:
Thank for help Fcabarrus, but when i request config i have the folowing result and as we can see FLAME_ENABLED = True is suposse to be ok.

Just for help
When i connect on local on flame serveur is working
If i connection my reverse port to cups web port i can access remotely but when i connect to Flame port i have the folowing error <<Pyro4.errors.CommunicationError: cannot connect: [Errno 111] Connection refused>>

Thank for help



Active configuration settings:
AUTOPROXY = True
BROADCAST_ADDRS = <broadcast>, 0.0.0.0
COMMTIMEOUT = 0.0
COMPRESSION = False
DETAILED_TRACEBACK = False
DOTTEDNAMES = False
FLAME_ENABLED = True
HMAC_KEY = None
HOST = localhost
LOGFILE = None
LOGLEVEL = None
LOGWIRE = False
MAX_MESSAGE_SIZE = 0
METADATA = True
NATHOST = None
NATPORT = 0
NS_BCHOST = None
NS_BCPORT = 9091
NS_HOST = localhost
NS_PORT = 9090
ONEWAY_THREADED = True
PICKLE_PROTOCOL_VERSION = 2
POLLTIMEOUT = 2.0
PREFER_IP_VERSION = 4
REQUIRE_EXPOSE = False
SERIALIZER = pickle
SERIALIZERS_ACCEPTED = set(['json', 'pickle', 'marshal', 'serpent'])
SERVERTYPE = thread
SOCK_REUSE = False
THREADING2 = False
THREADPOOL_SIZE = 16
And check if "flame_enable=3D True", if not change it by True

------------------------------------------------------------------------------
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
_______________________________________________
Pyro-core mailing list
[email protected]<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/pyro-core

------------------------------------------------------------------------------
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk

_______________________________________________
Pyro-core mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/pyro-core