Re: [wxPython-users] Re: wxPython 4 packages for Debian and Fedora
Scott Talbert <[email protected]> Tue, 24 Apr 2018 11:44:08 -0400 (EDT)
| Newsgroups | gmane.comp.python.wxpython.devel |
|---|---|
| Message-ID | <[email protected]> |
Which bug are you referring to? I did update my PPA packages for Ubuntu 16.04 to include the webview module, if that's what you're asking about. If you're asking about that atexit error, I don't have any ideas. :( I've never seen that error myself. Scott On Mon, 23 Apr 2018, Mario Lacunza wrote: > Hello Scott, > > any news about a possible fix for this bug? > > Saludos / Best regards > > Mario Lacunza > Email:: [email protected] > Personal Website:: http://www.lacunza.biz/ > Hosting:: http://mlv-host.com/ > Skype: mlacunzav > > Lima - Peru > > 2018-03-25 21:56 GMT-05:00 Mario Lacunza <[email protected]>: > I have another question: every time I got an error (using > Eclipse or using console) I see this message: > > Error in atexit._run_exitfuncs: > > and not even a clue about which file is the problem or the line where > the error is founded, is it that new for python3 or something in your > compilation? > > Saludos / Best regards > > Mario Lacunza > Email:: [email protected] > Personal Website:: http://www.lacunza.biz/ > Hosting:: http://mlv-host.com/ > Skype: mlacunzav > > Lima - Peru > > 2018-03-22 22:41 GMT-05:00 Mario Lacunza <[email protected]>: > Thanks Scott! Just in case when I compile wxPython in a > VirtualEnv all run fine... > > Saludos / Best regards > > Mario Lacunza > Email:: [email protected] > Personal Website:: http://www.lacunza.biz/ > Hosting:: http://mlv-host.com/ > Skype: mlacunzav > > Lima - Peru > > 2018-03-22 9:05 GMT-05:00 Scott Talbert <[email protected]>: > Yes, that's because I'm building against the system > wxWidgets, which on Debian does not (currently) have > wxWebView support. Xenial does, so I can remove the > disabling of html2. I will fix it. > > On Wed, 21 Mar 2018, Mario Lacunza wrote: > > Hi, > > I need to report a bug, please check the > attached screenshot, problem with > the html2 module. > > > > Saludos / Best regards > > Mario Lacunza > Email:: [email protected] > Personal Website:: > http://www.lacunza.biz/ > Hosting:: http://mlv-host.com/ > Skype: mlacunzav > > Lima - Peru > > 2018-03-01 1:30 GMT-05:00 Mario Lacunza > <[email protected]>: > OMG! what an id... LOL! thanks!! > working perfect!! > > 1000 gracias! > > Saludos / Best regards > > Mario Lacunza > Email:: [email protected] > Personal Website:: > http://www.lacunza.biz/ > Hosting:: http://mlv-host.com/ > Skype: mlacunzav > > Lima - Peru > > 2018-03-01 0:35 GMT-05:00 Scott Talbert > <[email protected]>: > That's the source package name. > The binary package names > are: > > python-wxgtk4.0 (Python 2 main > package) > python-wxgtk-media4.0 (Python 2 > media module) > python3-wxgtk4.0 (Python 3 main > package) > python3-wxgtk-media4.0 (Python 2 > media module) > > On Thu, 1 Mar 2018, Mario Lacunza > wrote: > > Hi, > > Amazing!! I just add your > PPA but when I try > to install the package the > system cant find it. > thanks! > > mario@mario-lenovo:~$ sudo > apt-get install > wxpython4.0 > [sudo] password for mario: > Leyendo lista de paquetes... > Hecho > Creando árbol de > dependencias > Leyendo la información de > estado... Hecho > E: No se ha podido localizar > el paquete > wxpython4.0 > E: No se pudo encontrar > ningún paquete usando > «*» con «wxpython4.0» > E: No se pudo encontrar > ningún paquete con la > expresión regular > «wxpython4.0» > > > > Saludos / Best regards > > Mario Lacunza > Email:: [email protected] > Personal Website:: > http://www.lacunza.biz/ > Hosting:: > http://mlv-host.com/ > Skype: mlacunzav > > Lima - Peru > > 2018-02-28 23:49 GMT-05:00 > Scott Talbert > <[email protected]>: > Okay, here's a PPA > with a build for > 16.04. Let me know if you > have any issues with > it. > > > > https://launchpad.net/~swt-techie/+archive/ubuntu/wxpython4 > > On Thu, 22 Feb 2018, > Mario Lacunza > wrote: > > No, for stable > as far I know only > Ubuntu staff can > add a package > into it. So > a PPA will be > great! I can test > it in my box if you > want (Ubuntu > 16.04 > 64bits) let me > know. > > Saludos / Best > regards > > Mario Lacunza > Email:: > [email protected] > Personal > Website:: > http://www.lacunza.biz/ > Hosting:: > http://mlv-host.com/ > Skype: mlacunzav > > Lima - Peru > > 2018-02-21 23:24 > GMT-05:00 Scott > Talbert > > <[email protected]>: > I can't > find a clear answer > on whether there > is a process for > adding new > packages to > Ubuntu stable > releases. My > guess is > probably > not, unless it is a > high priority > feature. > > Would a > PPA be of interest > for 16.04? That > would probably > be > doable > without a lot of > effort. > > On Wed, 21 > Feb 2018, Mario > Lacunza wrote: > > Hi, > > nice > news!! do you know if > the package will be > available > for Ubuntu > 16.04? > > Saludos / > Best regards > > Mario > Lacunza > Email:: > [email protected] > Personal > Website:: > http://www.lacunza.biz/ > Hosting:: > http://mlv-host.com/ > Skype: > mlacunzav > > Lima - > Peru > > 2018-02-21 > 19:48 GMT-05:00 > Scott Talbert > > <[email protected]>: > Hi > all, > > For > those who prefer > to use distribution > packages, > I'm happy > to > announce that > wxPython 4 is now an > 'apt-get' or > 'dnf > > install' away. :) > > > Debian: > > wxPython 4 has been > accepted into Debian > Unstable: > > > > https://tracker.debian.org/pkg/wxpython4.0 > > The > binary package > names are > python-wxgtk4.0 > (for > Python 2) > and > python3-wxgtk4.0 > (for Python 3). > The media > module is > > packaged separately as > > > > python-wxgtk-media4.0/python3-wxgtk-media4.0. > > > These packages have > also been pulled > into the > upcoming > Ubuntu > > 18.04 release. > > > Fedora: > The > packages have been > built in Rawhide > and F28 > > development. > The > update to pull > them into F27 is in > > updates-testing. It > > should be pushed > within a week or so. > > The > package names are: > > python2-wxpython4 > > python2-wxpython4-media (for > python 2 > media module) > > python2-wxpython4-webview > (for python 2 > webview > module) > > python3-wxpython4 > > python3-wxpython4-media (for > python 3 > media module) > > python3-wxpython4-webview > (for python 3 > webview > module) > > > Note: if you used my > COPR packages for > Fedora, you > might > > notice that the > package names are > different. The > official > > packages should > obsolete the COPR > packages, so > those > should be > > removed. Then you can > just remove my > COPR from your > > repository > configuration. > > Any > questions or bugs, > please let me > know. > > > Scott > > -- > You > received this > message because you > are subscribed > to the > > Google Groups > "wxPython-dev" group. > To > unsubscribe from > this group and stop > receiving > emails > from > it, > send an email to > > > > [email protected]. > For > more options, > visit > > > https://groups.google.com/d/optout. > > > -- > You > received this message > because you are > subscribed to > the Google > Groups > "wxPython-users" > group. > To unsubscribe > from this group and > stop receiving > emails from > it, send an > email to > > > [email protected]. > For more > options, visit > > > https://groups.google.com/d/optout. > > > > -- > You received > this message because > you are subscribed > to the Google > Groups > "wxPython-dev" group. > To unsubscribe > from this group and > stop receiving > emails from it, > send > an email to > > > [email protected]. > For more > options, visit > > > https://groups.google.com/d/optout. > > > -- > You received > this message because > you are subscribed > to the Google > Groups > "wxPython-dev" > group. > To unsubscribe > from this group and > stop receiving > emails from it, > send an > email to > > [email protected]. > For more > options, visit > > > https://groups.google.com/d/optout. > > > > -- > You received this message > because you are > subscribed to the Google > Groups "wxPython-dev" group. > To unsubscribe from this > group and stop > receiving emails from it, > send > an email to > > [email protected]. > For more options, visit > > https://groups.google.com/d/optout. > > > -- > You received this message > because you are > subscribed to the Google > Groups > "wxPython-dev" group. > To unsubscribe from this > group and stop > receiving emails from it, > send an > email to > > [email protected]. > For more options, visit > > https://groups.google.com/d/optout. > > > > -- > You received this message because > you are subscribed to > the Google Groups "wxPython-dev" > group. > To unsubscribe from this group and > stop receiving emails > from it, send an email to > > [email protected]. > For more options, visit > > https://groups.google.com/d/optout. > > > > -- > You received this message because you > are subscribed to the Google Groups > "wxPython-dev" group. > To unsubscribe from this group and stop > receiving emails from it, send an > email to > [email protected]. > For more options, visit > https://groups.google.com/d/optout. > > > > -- > You received this message because you are subscribed > to the Google Groups "wxPython-dev" group. > To unsubscribe from this group and stop receiving > emails from it, send an email to > [email protected]. > For more options, visit > https://groups.google.com/d/optout. > > > > > -- > You received this message because you are subscribed to the Google Groups > "wxPython-dev" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > > -- You received this message because you are subscribed to the Google Groups "wxPython-dev" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.