SVN: ZODB/branches/jim-simulation/src/ZEO/scripts/cache_trace_simulation.py Removed unused and probably non-functional simulation classes.
Jim Fulton <[email protected]>
| Newsgroups | gmane.comp.python.zope.zodb.cvs |
|---|---|
| Message-ID | <20100604153643.B7106941E9__14032.638181425$1275665812$gmane$org@cvs.zope.org> |
Log message for revision 113118:
Removed unused and probably non-functional simulation classes.
Changed:
U ZODB/branches/jim-simulation/src/ZEO/scripts/cache_trace_simulation.py
-=-
Modified: ZODB/branches/jim-simulation/src/ZEO/scripts/cache_trace_simulation.py
===================================================================
--- ZODB/branches/jim-simulation/src/ZEO/scripts/cache_trace_simulation.py 2010-06-04 15:36:24 UTC (rev 113117)
+++ ZODB/branches/jim-simulation/src/ZEO/scripts/cache_trace_simulation.py 2010-06-04 15:36:43 UTC (rev 113118)
@@ -40,35 +40,15 @@
cachelimit = 20*MB
simclass = CircularCacheSimulation
try:
- opts, args = getopt.getopt(sys.argv[1:], "bflyz2cOaTUs:")
+ opts, args = getopt.getopt(sys.argv[1:], "cs:")
except getopt.error, msg:
usage(msg)
return 2
for o, a in opts:
- if o == '-b':
- simclass = BuddyCacheSimulation
- elif o == '-f':
- simclass = SimpleCacheSimulation
- elif o == '-l':
- simclass = LRUCacheSimulation
- elif o == '-y':
- simclass = AltZEOCacheSimulation
- elif o == '-z':
- simclass = ZEOCacheSimulation
- elif o == '-s':
+ if o == '-s':
cachelimit = int(float(a)*MB)
- elif o == '-2':
- simclass = TwoQSimluation
elif o == '-c':
simclass = CircularCacheSimulation
- elif o == '-O':
- simclass = OracleSimulation
- elif o == '-a':
- simclass = ARCCacheSimulation
- elif o == '-T':
- simclass = ThorSimulation
- elif o == '-U':
- simclass = UnboundedSimulation
else:
assert False, (o, a)
@@ -101,11 +81,7 @@
print >> sys.stderr, "can't open %s: %s" % (filename, msg)
return 1
- # Create simulation object.
- if simclass is OracleSimulation:
- sim = simclass(cachelimit, filename)
- else:
- sim = simclass(cachelimit)
+ sim = simclass(cachelimit)
# Print output header.
sim.printheader()
@@ -530,1000 +506,6 @@
v = self.filemap[k]
print k, v[0], repr(v[1])
-#############################################################################
-# CAUTION: It's most likely that none of the simulators below this
-# point work anymore. A great many changes were needed to teach
-# CircularCacheSimulation (above) about MVCC, including method signature
-# changes and changes in cache file format, and none of the other simulator
-# classes were changed.
-#############################################################################
-
-class ZEOCacheSimulation(Simulation):
- """Simulate the ZEO 1.0 and 2.0 cache behavior.
-
- This assumes the cache is not persistent (we don't know how to
- simulate cache validation.)
- """
-
- extraname = "flips"
-
- def __init__(self, cachelimit):
- # Initialize base class
- Simulation.__init__(self, cachelimit)
- # Initialize additional global statistics
- self.total_flips = 0
-
- def restart(self):
- # Reset base class
- Simulation.restart(self)
- # Reset additional per-run statistics
- self.flips = 0
- # Set up simulation
- self.filesize = [4, 4] # account for magic number
- self.fileoids = [{}, {}]
- self.current = 0 # index into filesize, fileoids
-
- def load(self, oid, size):
- if (self.fileoids[self.current].get(oid) or
- self.fileoids[1 - self.current].get(oid)):
- self.hits += 1
- self.total_hits += 1
- else:
- self.write(oid, size)
-
- def write(self, oid, size):
- # Fudge because size is rounded up to multiples of 256. (31
- # is header overhead per cache record; 127 is to compensate
- # for rounding up to multiples of 256.)
- size = size + 31 - 127
- if self.filesize[self.current] + size > self.cachelimit / 2:
- # Cache flip
- self.flips += 1
- self.total_flips += 1
- self.current = 1 - self.current
- self.filesize[self.current] = 4
- self.fileoids[self.current] = {}
- self.filesize[self.current] += size
- self.fileoids[self.current][oid] = 1
-
- def inval(self, oid):
- if self.fileoids[self.current].get(oid):
- self.invals += 1
- self.total_invals += 1
- del self.fileoids[self.current][oid]
- elif self.fileoids[1 - self.current].get(oid):
- self.invals += 1
- self.total_invals += 1
- del self.fileoids[1 - self.current][oid]
-
-class AltZEOCacheSimulation(ZEOCacheSimulation):
- """A variation of the ZEO cache that copies to the current file.
-
- When a hit is found in the non-current cache file, it is copied to
- the current cache file. Exception: when the copy would cause a
- cache flip, we don't copy (this is part laziness, part concern
- over causing extraneous flips).
- """
-
- def load(self, oid, size):
- if self.fileoids[self.current].get(oid):
- self.hits += 1
- self.total_hits += 1
- elif self.fileoids[1 - self.current].get(oid):
- self.hits += 1
- self.total_hits += 1
- # Simulate a write, unless it would cause a flip
- size = size + 31 - 127
- if self.filesize[self.current] + size <= self.cachelimit / 2:
- self.filesize[self.current] += size
- self.fileoids[self.current][oid] = 1
- del self.fileoids[1 - self.current][oid]
- else:
- self.write(oid, size)
-
-class LRUCacheSimulation(Simulation):
-
- extraname = "evicts"
-
- def __init__(self, cachelimit):
- # Initialize base class
- Simulation.__init__(self, cachelimit)
- # Initialize additional global statistics
- self.total_evicts = 0
-
- def restart(self):
- # Reset base class
- Simulation.restart(self)
- # Reset additional per-run statistics
- self.evicts = 0
- # Set up simulation
- self.cache = {}
- self.size = 0
- self.head = Node(None, None)
- self.head.linkbefore(self.head)
-
- def load(self, oid, size):
- node = self.cache.get(oid)
- if node is not None:
- self.hits += 1
- self.total_hits += 1
- node.linkbefore(self.head)
- else:
- self.write(oid, size)
-
- def write(self, oid, size):
- node = self.cache.get(oid)
- if node is not None:
- node.unlink()
- assert self.head.next is not None
- self.size -= node.size
- node = Node(oid, size)
- self.cache[oid] = node
- node.linkbefore(self.head)
- self.size += size
- # Evict LRU nodes
- while self.size > self.cachelimit:
- self.evicts += 1
- self.total_evicts += 1
- node = self.head.next
- assert node is not self.head
- node.unlink()
- assert self.head.next is not None
- del self.cache[node.oid]
- self.size -= node.size
-
- def inval(self, oid):
- node = self.cache.get(oid)
- if node is not None:
- assert node.oid == oid
- self.invals += 1
- self.total_invals += 1
- node.unlink()
- assert self.head.next is not None
- del self.cache[oid]
- self.size -= node.size
- assert self.size >= 0
-
-class Node(object):
- """Node in a doubly-linked list, storing oid and size as payload.
-
- A node can be linked or unlinked; in the latter case, next and
- prev are None. Initially a node is unlinked.
- """
-
- __slots__ = ['prev', 'next', 'oid', 'size']
-
- def __init__(self, oid, size):
- self.oid = oid
- self.size = size
- self.prev = self.next = None
-
- def unlink(self):
- prev = self.prev
- next = self.next
- if prev is not None:
- assert next is not None
- assert prev.next is self
- assert next.prev is self
- prev.next = next
- next.prev = prev
- self.prev = self.next = None
- else:
- assert next is None
-
- def linkbefore(self, next):
- self.unlink()
- prev = next.prev
- if prev is None:
- assert next.next is None
- prev = next
- self.prev = prev
- self.next = next
- prev.next = next.prev = self
-
-am = object()
-a1in = object()
-a1out = object()
-
-class Node2Q(Node):
-
- __slots__ = ["kind", "hits"]
-
- def __init__(self, oid, size, kind=None):
- Node.__init__(self, oid, size)
- self.kind = kind
- self.hits = 0
-
- def linkbefore(self, next):
- if next.kind != self.kind:
- self.kind = next.kind
- Node.linkbefore(self, next)
-
-class TwoQSimluation(Simulation):
- # The original 2Q algorithm is page based and the authors offer
- # tuning guidlines based on a page-based cache. Our cache is
- # object based, so, for example, it's hard to compute the number
- # of oids to store in a1out based on the size of a1in.
-
- extras = "evicts", "hothit", "am_add"
-
- NodeClass = Node2Q
-
- def __init__(self, cachelimit, outlen=10000, threshold=0):
- Simulation.__init__(self, cachelimit)
-
- # The promotion threshold: If a hit occurs in a1out, it is
- # promoted to am if the number of hits on the object while it
- # was in a1in is at least threshold. The standard 2Q scheme
- # uses a threshold of 0.
- self.threshold = threshold
- self.am_limit = 3 * self.cachelimit / 4
- self.a1in_limit = self.cachelimit / 4
-
- self.cache = {}
- self.am_size = 0
- self.a1in_size = 0
- self.a1out_size = 0
-
- self.total_evicts = 0
- self.total_hothit = 0
- self.total_am_add = 0
- self.a1out_limit = outlen
-
- # An LRU queue of hot objects
- self.am = self.NodeClass(None, None, am)
- self.am.linkbefore(self.am)
- # A FIFO queue of recently referenced objects. It's purpose
- # is to absorb references to objects that are accessed a few
- # times in short order, then forgotten about.
- self.a1in = self.NodeClass(None, None, a1in)
- self.a1in.linkbefore(self.a1in)
- # A FIFO queue of recently reference oids.
- # This queue only stores the oids, not any data. If we get a
- # hit in this queue, promote the object to am.
- self.a1out = self.NodeClass(None, None, a1out)
- self.a1out.linkbefore(self.a1out)
-
- def makespace(self, size):
- for space in 0, size:
- if self.enoughspace(size):
- return
- self.evict_a1in(space)
- if self.enoughspace(size):
- return
- self.evict_am(space)
-
- def enoughspace(self, size):
- totalsize = self.a1in_size + self.am_size
- return totalsize + size < self.cachelimit
-
- def evict_a1in(self, extra):
- while self.a1in_size + extra > self.a1in_limit:
- if self.a1in.next is self.a1in:
- return
- assert self.a1in.next is not None
- node = self.a1in.next
- self.evicts += 1
- self.total_evicts += 1
- node.linkbefore(self.a1out)
- self.a1out_size += 1
- self.a1in_size -= node.size
- if self.a1out_size > self.a1out_limit:
- assert self.a1out.next is not None
- node = self.a1out.next
- node.unlink()
- del self.cache[node.oid]
- self.a1out_size -= 1
-
- def evict_am(self, extra):
- while self.am_size + extra > self.am_limit:
- if self.am.next is self.am:
- return
- assert self.am.next is not None
- node = self.am.next
- self.evicts += 1
- self.total_evicts += 1
- # This node hasn't been accessed in a while, so just
- # forget about it.
- node.unlink()
- del self.cache[node.oid]
- self.am_size -= node.size
-
- def write(self, oid, size):
- # A write always follows a read (ZODB doesn't allow blind writes).
- # So this write must have followed a recent read of the object.
- # Don't change it's position, but do update the size.
-
- # XXX For now, don't evict pages if the new version of the object
- # is big enough to require eviction.
- node = self.cache.get(oid)
- if node is None or node.kind is a1out:
- return
- if node.kind is am:
- self.am_size = self.am_size - node.size + size
- node.size = size
- else:
- self.a1in_size = self.a1in_size - node.size + size
- node.size = size
-
- def load(self, oid, size):
- node = self.cache.get(oid)
- if node is not None:
- if node.kind is am:
- self.hits += 1
- self.total_hits += 1
- self.hothit += 1
- self.total_hothit += 1
- node.hits += 1
- node.linkbefore(self.am)
- elif node.kind is a1in:
- self.hits += 1
- self.total_hits += 1
- node.hits += 1
- elif node.kind is a1out:
- self.a1out_size -= 1
- if node.hits >= self.threshold:
- self.makespace(node.size)
- self.am_size += node.size
- node.linkbefore(self.am)
- self.cache[oid] = node
- self.am_add += 1
- self.total_am_add += 1
- else:
- node.unlink()
- self.insert(oid, size)
- else:
- self.insert(oid, size)
-
- def insert(self, oid, size):
- # New objects enter the cache via a1in. If they
- # are frequently used over a long enough time, they
- # will be promoted to am -- but only via a1out.
- self.makespace(size)
- node = self.NodeClass(oid, size, a1in)
- node.linkbefore(self.a1in)
- self.cache[oid] = node
- self.a1in_size += node.size
-
- def inval(self, oid):
- # The original 2Q algorithm didn't have to deal with
- # invalidations. My own solution: Move it to the head of
- # a1out.
- node = self.cache.get(oid)
- if node is None:
- return
- self.invals += 1
- self.total_invals += 1
- # XXX Should an invalidation to a1out count?
- if node.kind is a1out:
- return
- node.linkbefore(self.a1out)
- if node.kind is am:
- self.am_size -= node.size
- else:
- self.a1in_size -= node.size
-
- def restart(self):
- Simulation.restart(self)
-
- self.evicts = 0
- self.hothit = 0
- self.am_add = 0
-
-lruT = object()
-lruB = object()
-fifoT = object()
-fifoB = object()
-
-class ARCCacheSimulation(Simulation):
-
- # Based on the paper ARC: A Self-Tuning, Low Overhead Replacement
- # Cache by Nimrod Megiddo and Dharmendra S. Modha, USENIX FAST
- # 2003. The paper describes a block-based cache. A lot of the
- # details need to be fiddled to work with an object-based cache.
- # For size issues, the key insight ended up being conditions
- # A.1-A.5 rather than the details of the algorithm in Fig. 4.
-
- extras = "lruThits", "evicts", "p"
-
- def __init__(self, cachelimit):
- Simulation.__init__(self, cachelimit)
- # There are two pairs of linked lists. Each pair has a top and
- # bottom half. The bottom half contains metadata, but not actual
- # objects.
-
- # LRU list of frequently used objects
- self.lruT = Node2Q(None, None, lruT)
- self.lruT.linkbefore(self.lruT)
- self.lruT_len = 0
- self.lruT_size = 0
-
- self.lruB = Node2Q(None, None, lruB)
- self.lruB.linkbefore(self.lruB)
- self.lruB_len = 0
- self.lruB_size = 0
-
- # FIFO list of objects seen once
- self.fifoT = Node2Q(None, None, fifoT)
- self.fifoT.linkbefore(self.fifoT)
- self.fifoT_len = 0
- self.fifoT_size = 0
-
- self.fifoB = Node2Q(None, None, fifoB)
- self.fifoB.linkbefore(self.fifoB)
- self.fifoB_len = 0
- self.fifoB_size = 0
-
- # maps oid to node
- self.cache = {}
-
- # The paper says that p should be adjust be 1 as the minimum:
- # "The compound effect of such small increments and decrements
- # to p s quite profound as we will demonstrated in the next
- # section." Not really, as far as I can tell. In my traces
- # with a very small cache, it was taking far too long to adjust
- # towards favoring some FIFO component. I would guess that the
- # chief difference is that our caches are much bigger than the
- # ones they experimented with. Their biggest cache had 512K
- # entries, while our smallest cache will have 40 times that many
- # entries.
-
- self.p = 0
- # XXX multiply computed adjustments to p by walk_factor
- self.walk_factor = 500
-
- # statistics
- self.total_hits = 0
- self.total_lruThits = 0
- self.total_fifoThits = 0
- self.total_evicts = 0
-
- def restart(self):
- Simulation.restart(self)
- self.hits = 0
- self.lruThits = 0
- self.fifoThits = 0
- self.evicts = 0
-
- def write(self, oid, size):
- pass
-
- def replace(self, lruB=False):
- self.evicts += 1
- self.total_evicts += 1
- if self.fifoT_size > self.p or (lruB and self.fifoT_size == self.p):
- node = self.fifoT.next
- if node is self.fifoT:
- return 0
- assert node is not self.fifoT, self.stats()
- node.linkbefore(self.fifoB)
- self.fifoT_len -= 1
- self.fifoT_size -= node.size
- self.fifoB_len += 1
- self.fifoB_size += node.size
- else:
- node = self.lruT.next
- if node is self.lruT:
- return 0
- assert node is not self.lruT, self.stats()
- node.linkbefore(self.lruB)
- self.lruT_len -= 1
- self.lruT_size -= node.size
- self.lruB_len += 1
- self.lruB_size += node.size
- return node.size
-
- def stats(self):
- self.totalsize = self.lruT_size + self.fifoT_size
- self.allsize = self.totalsize + self.lruB_size + self.fifoB_size
- print "cachelimit = %s totalsize=%s allsize=%s" % (
- addcommas(self.cachelimit),
- addcommas(self.totalsize),
- addcommas(self.allsize))
-
- fmt = (
- "p=%(p)d\n"
- "lruT = %(lruT_len)5d / %(lruT_size)8d / %(lruThits)d\n"
- "fifoT = %(fifoT_len)5d / %(fifoT_size)8d / %(fifoThits)d\n"
- "lruB = %(lruB_len)5d / %(lruB_size)8d\n"
- "fifoB = %(fifoB_len)5d / %(fifoB_size)8d\n"
- "loads=%(loads)d hits=%(hits)d evicts=%(evicts)d\n"
- )
- print fmt % self.__dict__
-
- def report(self, extratext=''):
- self.total_p = self.p
- Simulation.report(self, extratext)
-
- def load(self, oid, size):
- node = self.cache.get(oid)
- if node is None:
- # cache miss: We're going to insert a new object in fifoT.
- # If fifo is full, we'll need to evict something to make
- # room for it.
-
- prev = need = size
- while need > 0:
- if size + self.fifoT_size + self.fifoB_size >= self.cachelimit:
- if need + self.fifoT_size >= self.cachelimit:
- node = self.fifoB.next
- assert node is not self.fifoB, self.stats()
- node.unlink()
- del self.cache[node.oid]
- self.fifoB_size -= node.size
- self.fifoB_len -= 1
- self.evicts += 1
- self.total_evicts += 1
- else:
- node = self.fifoB.next
- assert node is not self.fifoB, self.stats()
- node.unlink()
- del self.cache[node.oid]
- self.fifoB_size -= node.size
- self.fifoB_len -= 1
- if self.fifoT_size + self.lruT_size > self.cachelimit:
- need -= self.replace()
- else:
- incache_size = self.fifoT_size + self.lruT_size + need
- total_size = (incache_size + self.fifoB_size
- + self.lruB_size)
- if total_size >= self.cachelimit * 2:
- node = self.lruB.next
- if node is self.lruB:
- break
- assert node is not self.lruB
- node.unlink()
- del self.cache[node.oid]
- self.lruB_size -= node.size
- self.lruB_len -= 1
- elif incache_size > self.cachelimit:
- need -= self.replace()
- else:
- break
- if need == prev:
- # XXX hack, apparently we can't get rid of anything else
- break
- prev = need
-
- node = Node2Q(oid, size)
- node.linkbefore(self.fifoT)
- self.fifoT_len += 1
- self.fifoT_size += size
- self.cache[oid] = node
- else:
- # a cache hit, but possibly in a bottom list that doesn't
- # actually hold the object
- if node.kind is lruT:
- node.linkbefore(self.lruT)
-
- self.hits += 1
- self.total_hits += 1
- self.lruThits += 1
- self.total_lruThits += 1
-
- elif node.kind is fifoT:
- node.linkbefore(self.lruT)
- self.fifoT_len -= 1
- self.lruT_len += 1
- self.fifoT_size -= node.size
- self.lruT_size += node.size
-
- self.hits += 1
- self.total_hits += 1
- self.fifoThits += 1
- self.total_fifoThits += 1
-
- elif node.kind is fifoB:
- node.linkbefore(self.lruT)
- self.fifoB_len -= 1
- self.lruT_len += 1
- self.fifoB_size -= node.size
- self.lruT_size += node.size
-
- # XXX need a better min than 1?
-## print "adapt+", max(1, self.lruB_size // self.fifoB_size)
- delta = max(1, self.lruB_size / max(1, self.fifoB_size))
- self.p += delta * self.walk_factor
- if self.p > self.cachelimit:
- self.p = self.cachelimit
-
- need = node.size
- if self.lruT_size + self.fifoT_size + need > self.cachelimit:
- while need > 0:
- r = self.replace()
- if not r:
- break
- need -= r
-
- elif node.kind is lruB:
- node.linkbefore(self.lruT)
- self.lruB_len -= 1
- self.lruT_len += 1
- self.lruB_size -= node.size
- self.lruT_size += node.size
-
- # XXX need a better min than 1?
-## print "adapt-", max(1, self.fifoB_size // self.lruB_size)
- delta = max(1, self.fifoB_size / max(1, self.lruB_size))
- self.p -= delta * self.walk_factor
- if self.p < 0:
- self.p = 0
-
- need = node.size
- if self.lruT_size + self.fifoT_size + need > self.cachelimit:
- while need > 0:
- r = self.replace(lruB=True)
- if not r:
- break
- need -= r
-
- def inval(self, oid):
- pass
-
- def extraheader(self):
- pass
-
-class OracleSimulation(LRUCacheSimulation):
- # Not sure how to implement this yet. This is a cache where I
- # cheat to see how good we could actually do. The cache
- # replacement problem for multi-size caches is NP-hard, so we're
- # not going to have an optimal solution.
-
- # At the moment, the oracle is mostly blind. It knows which
- # objects will be referenced more than once, so that it can
- # ignore objects referenced only once. In most traces, these
- # objects account for about 20% of references.
-
- def __init__(self, cachelimit, filename):
- LRUCacheSimulation.__init__(self, cachelimit)
- self.count = {}
- self.scan(filename)
-
- def load(self, oid, size):
- node = self.cache.get(oid)
- if node is not None:
- self.hits += 1
- self.total_hits += 1
- node.linkbefore(self.head)
- else:
- if oid in self.count:
- self.write(oid, size)
-
- def scan(self, filename):
- # scan the file in advance to figure out which objects will
- # be referenced more than once.
- f = open(filename, "rb")
- struct_unpack = struct.unpack
- f_read = f.read
- offset = 0
- while 1:
- # Read a record and decode it
- r = f_read(8)
- if len(r) < 8:
- break
- offset += 8
- ts, code = struct_unpack(">ii", r)
- if ts == 0:
- # Must be a misaligned record caused by a crash
- ##print "Skipping 8 bytes at offset", offset-8
- continue
- r = f_read(16)
- if len(r) < 16:
- break
- offset += 16
- oid, serial = struct_unpack(">8s8s", r)
- if code & 0x70 == 0x20:
- # only look at loads
- self.count[oid] = self.count.get(oid, 0) + 1
-
- all = len(self.count)
-
- # Now remove everything with count == 1
- once = [oid for oid, count in self.count.iteritems()
- if count == 1]
- for oid in once:
- del self.count[oid]
-
- print "Scanned file, %d unique oids, %d repeats" % (
- all, len(self.count))
-
-class BuddyCacheSimulation(LRUCacheSimulation):
-
- def __init__(self, cachelimit):
- LRUCacheSimulation.__init__(self, roundup(cachelimit))
-
- def restart(self):
- LRUCacheSimulation.restart(self)
- self.allocator = self.allocatorFactory(self.cachelimit)
-
- def allocatorFactory(self, size):
- return BuddyAllocator(size)
-
- # LRUCacheSimulation.load() is just fine
-
- def write(self, oid, size):
- node = self.cache.get(oid)
- if node is not None:
- node.unlink()
- assert self.head.next is not None
- self.size -= node.size
- self.allocator.free(node)
- while 1:
- node = self.allocator.alloc(size)
- if node is not None:
- break
- # Failure to allocate. Evict something and try again.
- node = self.head.next
- assert node is not self.head
- self.evicts += 1
- self.total_evicts += 1
- node.unlink()
- assert self.head.next is not None
- del self.cache[node.oid]
- self.size -= node.size
- self.allocator.free(node)
- node.oid = oid
- self.cache[oid] = node
- node.linkbefore(self.head)
- self.size += node.size
-
- def inval(self, oid):
- node = self.cache.get(oid)
- if node is not None:
- assert node.oid == oid
- self.invals += 1
- self.total_invals += 1
- node.unlink()
- assert self.head.next is not None
- del self.cache[oid]
- self.size -= node.size
- assert self.size >= 0
- self.allocator.free(node)
-
-class SimpleCacheSimulation(BuddyCacheSimulation):
-
- def allocatorFactory(self, size):
- return SimpleAllocator(size)
-
- def finish(self):
- BuddyCacheSimulation.finish(self)
- self.allocator.report()
-
-MINSIZE = 256
-
-class BuddyAllocator:
-
- def __init__(self, cachelimit):
- cachelimit = roundup(cachelimit)
- self.cachelimit = cachelimit
- self.avail = {} # Map rounded-up sizes to free list node heads
- self.nodes = {} # Map address to node
- k = MINSIZE
- while k <= cachelimit:
- self.avail[k] = n = Node(None, None) # Not BlockNode; has no addr
- n.linkbefore(n)
- k += k
- node = BlockNode(None, cachelimit, 0)
- self.nodes[0] = node
- node.linkbefore(self.avail[cachelimit])
-
- def alloc(self, size):
- size = roundup(size)
- k = size
- while k <= self.cachelimit:
- head = self.avail[k]
- node = head.next
- if node is not head:
- break
- k += k
- else:
- return None # Store is full, or block is too large
- node.unlink()
- size2 = node.size
- while size2 > size:
- size2 = size2 / 2
- assert size2 >= size
- node.size = size2
- buddy = BlockNode(None, size2, node.addr + size2)
- self.nodes[buddy.addr] = buddy
- buddy.linkbefore(self.avail[size2])
- node.oid = 1 # Flag as in-use
- return node
-
- def free(self, node):
- assert node is self.nodes[node.addr]
- assert node.prev is node.next is None
- node.oid = None # Flag as free
- while node.size < self.cachelimit:
- buddy_addr = node.addr ^ node.size
- buddy = self.nodes[buddy_addr]
- assert buddy.addr == buddy_addr
- if buddy.oid is not None or buddy.size != node.size:
- break
- # Merge node with buddy
- buddy.unlink()
- if buddy.addr < node.addr: # buddy prevails
- del self.nodes[node.addr]
- node = buddy
- else: # node prevails
- del self.nodes[buddy.addr]
- node.size *= 2
- assert node is self.nodes[node.addr]
- node.linkbefore(self.avail[node.size])
-
- def dump(self, msg=""):
- if msg:
- print msg,
- size = MINSIZE
- blocks = bytes = 0
- while size <= self.cachelimit:
- head = self.avail[size]
- node = head.next
- count = 0
- while node is not head:
- count += 1
- node = node.next
- if count:
- print "%d:%d" % (size, count),
- blocks += count
- bytes += count*size
- size += size
- print "-- %d, %d" % (bytes, blocks)
-
-def roundup(size):
- k = MINSIZE
- while k < size:
- k += k
- return k
-
-class SimpleAllocator:
-
- def __init__(self, arenasize):
- self.arenasize = arenasize
- self.avail = BlockNode(None, 0, 0) # Weird: empty block as list head
- self.rover = self.avail
- node = BlockNode(None, arenasize, 0)
- node.linkbefore(self.avail)
- self.taglo = {0: node}
- self.taghi = {arenasize: node}
- # Allocator statistics
- self.nallocs = 0
- self.nfrees = 0
- self.allocloops = 0
- self.freebytes = arenasize
- self.freeblocks = 1
- self.allocbytes = 0
- self.allocblocks = 0
-
- def report(self):
- print ("NA=%d AL=%d NF=%d ABy=%d ABl=%d FBy=%d FBl=%d" %
- (self.nallocs, self.allocloops,
- self.nfrees,
- self.allocbytes, self.allocblocks,
- self.freebytes, self.freeblocks))
-
- def alloc(self, size):
- self.nallocs += 1
- # First fit algorithm
- rover = stop = self.rover
- while 1:
- self.allocloops += 1
- if rover.size >= size:
- break
- rover = rover.next
- if rover is stop:
- return None # We went round the list without finding space
- if rover.size == size:
- self.rover = rover.next
- rover.unlink()
- del self.taglo[rover.addr]
- del self.taghi[rover.addr + size]
- self.freeblocks -= 1
- self.allocblocks += 1
- self.freebytes -= size
- self.allocbytes += size
- return rover
- # Take space from the beginning of the roving pointer
- assert rover.size > size
- node = BlockNode(None, size, rover.addr)
- del self.taglo[rover.addr]
- rover.size -= size
- rover.addr += size
- self.taglo[rover.addr] = rover
- #self.freeblocks += 0 # No change here
- self.allocblocks += 1
- self.freebytes -= size
- self.allocbytes += size
- return node
-
- def free(self, node):
- self.nfrees += 1
- self.freeblocks += 1
- self.allocblocks -= 1
- self.freebytes += node.size
- self.allocbytes -= node.size
- node.linkbefore(self.avail)
- self.taglo[node.addr] = node
- self.taghi[node.addr + node.size] = node
- x = self.taghi.get(node.addr)
- if x is not None:
- # Merge x into node
- x.unlink()
- self.freeblocks -= 1
- del self.taglo[x.addr]
- del self.taghi[x.addr + x.size]
- del self.taglo[node.addr]
- node.addr = x.addr
- node.size += x.size
- self.taglo[node.addr] = node
- x = self.taglo.get(node.addr + node.size)
- if x is not None:
- # Merge x into node
- x.unlink()
- self.freeblocks -= 1
- del self.taglo[x.addr]
- del self.taghi[x.addr + x.size]
- del self.taghi[node.addr + node.size]
- node.size += x.size
- self.taghi[node.addr + node.size] = node
- # It's possible that either one of the merges above invalidated
- # the rover.
- # It's simplest to simply reset the rover to the newly freed block.
- self.rover = node
-
- def dump(self, msg=""):
- if msg:
- print msg,
- count = 0
- bytes = 0
- node = self.avail.next
- while node is not self.avail:
- bytes += node.size
- count += 1
- node = node.next
- print count, "free blocks,", bytes, "free bytes"
- self.report()
-
-class BlockNode(Node):
-
- __slots__ = ['addr']
-
- def __init__(self, oid, size, addr):
- Node.__init__(self, oid, size)
- self.addr = addr
-
-def testallocator(factory=BuddyAllocator):
- # Run one of Knuth's experiments as a test
- import random
- import heapq # This only runs with Python 2.3, folks :-)
- reportfreq = 100
- cachelimit = 2**17
- cache = factory(cachelimit)
- queue = []
- T = 0
- blocks = 0
- while T < 5000:
- while queue and queue[0][0] <= T:
- time, node = heapq.heappop(queue)
- assert time == T
- ##print "free addr=%d, size=%d" % (node.addr, node.size)
- cache.free(node)
- blocks -= 1
- size = random.randint(100, 2000)
- lifetime = random.randint(1, 100)
- node = cache.alloc(size)
- if node is None:
- print "out of mem"
- cache.dump("T=%4d: %d blocks;" % (T, blocks))
- break
- else:
- ##print "alloc addr=%d, size=%d" % (node.addr, node.size)
- blocks += 1
- heapq.heappush(queue, (T + lifetime, node))
- T = T+1
- if T % reportfreq == 0:
- cache.dump("T=%4d: %d blocks;" % (T, blocks))
-
def hitrate(loads, hits):
return "%5.1f%%" % (100.0 * hits / max(1, loads))
@@ -1546,218 +528,5 @@
i -= 3
return sign + s
-import random
-
-def maybe(f, p=0.5):
- if random.random() < p:
- f()
-
-#############################################################################
-# Thor-like eviction scheme.
-#
-# The cache keeps a list of all objects, and uses a travelling pointer
-# to decay the worth of objects over time.
-
-class ThorNode(Node):
-
- __slots__ = ['worth']
-
- def __init__(self, oid, size, worth=None):
- Node.__init__(self, oid, size)
- self.worth = worth
-
-class ThorListHead(Node):
- def __init__(self):
- Node.__init__(self, 0, 0)
- self.next = self.prev = self
-
-class ThorSimulation(Simulation):
-
- extras = "evicts", "trips"
-
- def __init__(self, cachelimit):
- Simulation.__init__(self, cachelimit)
-
- # Maximum total of object sizes we keep in cache.
- self.maxsize = cachelimit
- # Current total of object sizes in cache.
- self.currentsize = 0
-
- # A worth byte maps to a set of all objects with that worth.
- # This is cheap to keep updated, and makes finding low-worth
- # objects for eviction trivial (just march over the worthsets
- # list, in order).
- self.worthsets = [Set() for dummy in range(256)]
-
- # We keep a circular list of all objects in cache. currentobj
- # walks around it forever. Each time _tick() is called, the
- # worth of currentobj is decreased, basically by shifting
- # right 1, and currentobj moves on to the next object. When
- # an object is first inserted, it enters the list right before
- # currentobj. When an object is accessed, its worth is
- # increased by or'ing in 0x80. This scheme comes from the
- # Thor system, and is an inexpensive way to account for both
- # recency and frequency of access: recency is reflected in
- # the leftmost bit set, and frequency by how many bits are
- # set.
- #
- # Note: because evictions are interleaved with ticks,
- # unlinking an object is tricky, lest we evict currentobj. The
- # class _unlink method takes care of this properly.
- self.listhead = ThorListHead()
- self.currentobj = self.listhead
-
- # Map an object.oid to its ThorNode.
- self.oid2object = {}
-
- self.total_evicts = self.total_trips = 0
-
- # Unlink object from the circular list, taking care not to lose
- # track of the current object. Always call this instead of
- # invoking obj.unlink() directly.
- def _unlink(self, obj):
- assert obj is not self.listhead
- if obj is self.currentobj:
- self.currentobj = obj.next
- obj.unlink()
-
- # Change obj.worth to newworth, maintaining invariants.
- def _change_worth(self, obj, newworth):
- if obj.worth != newworth:
- self.worthsets[obj.worth].remove(obj)
- obj.worth = newworth
- self.worthsets[newworth].add(obj)
-
- def add(self, object):
- assert object.oid not in self.oid2object
- self.oid2object[object.oid] = object
-
- newsize = self.currentsize + object.size
- if newsize > self.maxsize:
- self._evictbytes(newsize - self.maxsize)
- self.currentsize += object.size
- object.linkbefore(self.currentobj)
-
- if object.worth is None:
- # Give smaller objects higher initial worth. This favors kicking
- # out unreferenced large objects before kicking out unreferenced
- # small objects. On real life traces, this is a significant
- # win for the hit rate.
- object.worth = 32 - int(round(math.log(object.size, 2)))
- self.worthsets[object.worth].add(object)
-
- # Decrease the worth of the current object, and advance the
- # current object.
- def _tick(self):
- c = self.currentobj
- if c is self.listhead:
- c = c.next
- if c is self.listhead: # list is empty
- return
- self.total_trips += 1
- self.trips += 1
- self._change_worth(c, (c.worth + 1) >> 1)
- self.currentobj = c.next
-
- def access(self, oid):
- self._tick()
- obj = self.oid2object.get(oid)
- if obj is None:
- return None
- self._change_worth(obj, obj.worth | 0x80)
- return obj
-
- # Evict objects of least worth first, until at least nbytes bytes
- # have been freed.
- def _evictbytes(self, nbytes):
- for s in self.worthsets:
- while s:
- if nbytes <= 0:
- return
- obj = s.pop()
- nbytes -= obj.size
- self._evictobj(obj)
-
- def _evictobj(self, obj):
- self.currentsize -= obj.size
- self.worthsets[obj.worth].discard(obj)
- del self.oid2object[obj.oid]
- self._unlink(obj)
-
- self.evicts += 1
- self.total_evicts += 1
-
- def _evict_without_bumping_evict_stats(self, obj):
- self._evictobj(obj)
- self.evicts -= 1
- self.total_evicts -= 1
-
- # Simulator overrides from here on.
-
- def restart(self):
- # Reset base class
- Simulation.restart(self)
- # Reset additional per-run statistics
- self.evicts = self.trips = 0
-
- def write(self, oid, size):
- obj = self.oid2object.get(oid)
- worth = None
- if obj is not None:
- worth = obj.worth
- self._evict_without_bumping_evict_stats(obj)
- self.add(ThorNode(oid, size, worth))
-
- def load(self, oid, size):
- if self.access(oid) is not None:
- self.hits += 1
- self.total_hits += 1
- else:
- self.write(oid, size)
-
- def inval(self, oid):
- obj = self.oid2object.get(oid)
- if obj is not None:
- self.invals += 1
- self.total_invals += 1
- self._evict_without_bumping_evict_stats(obj)
-
- # Take the "x" off to see additional stats after each restart period.
- def xreport(self):
- Simulation.report(self)
- print 'non-empty worth sets', sum(map(bool, self.worthsets)),
- print 'objects', len(self.oid2object),
- print 'size', self.currentsize
-
-#############################################################################
-# Perfection: What if the cache were unbounded, and never forgot anything?
-# This simulator answers that question directly; the cache size parameter
-# isn't used.
-
-class UnboundedSimulation(Simulation):
-
- extraname = 'evicts' # for some reason we *have* to define >= 1 extra
-
- def __init__(self, cachelimit):
- Simulation.__init__(self, cachelimit)
- self.oids = Set()
- self.evicts = self.total_evicts = 0
-
- def write(self, oid, size):
- self.oids.add(oid)
-
- def load(self, oid, size):
- if oid in self.oids:
- self.hits += 1
- self.total_hits += 1
- else:
- self.oids.add(oid)
-
- def inval(self, oid):
- if oid in self.oids:
- self.invals += 1
- self.total_invals += 1
- self.oids.remove(oid)
-
if __name__ == "__main__":
sys.exit(main())