Re: active neurofeedback community?

--===============5213477088122609865==
Content-Type: multipart/alternative; boundary="00000000000023c3660629de4999"

--00000000000023c3660629de4999
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable

Hi, OpenEEG could be considered a legacy project, but depending on your
use-case it might still be worth to look into. It is still purchasable from
Olimex for example (https://www.olimex.com/Products/EEG/OpenEEG/). Or you
can make your own/customize existing projects, as the PCB designs and
circuit schematics are freely available. That might not be true for other
projects, although there are multiple more modern open-source projects
(e.g. OpenBCI). The fundamentals of the OpenEEG still work, although you
might substitute some legacy components because they might not be available
anymore. But you can still build one if you wish to even today, it is
interesting to learn the fundamentals of how EEG devices work.

I recently translated the documentation of my OpenEEG build project from
2018. The goal of the project was to customize and manufacture an OpenEEG
device based on EEG-SMT by Olimex in school environment, including the PCB
and electrodes.(https://github.com/splithor1zon/EEG-ReMake) I believe my
EEG is also extensible to 6 channels, as I prepared an extension connector
for an extension board. However, I never developed an extension board. Back
then it cost me around 100=E2=82=AC to manufacture the device, so it still =
could be
significantly cheaper than more modern alternatives. EEG-SMT from Olimex
with active electrodes costs around 150=E2=82=AC, so that is also possibili=
ty, but
it's only limited to two channels.

The Eagle software was acquired by Autodesk, but the .sch and .brd files
should still be compatible by modern Autodesk Eagle software.

S pozdravom,
Dami=C3=A1n Filo


so 21. 12. 2024 o 19:09 Sean Tischler <[email protected]> nap=C3=ADsal(a):

> Hello,
>
> I recently found the openeeg website while searching for ways to do at
> home neurofeedback. I am starting to go through all of the pages and
> documentation and notice there are a lot of links and references that
> are old or out of date (for example the FAQ page mentions getting
> EagleCAD from cadsoft and a link to www.cadsoft.de. This website is
> now a financial software developer and apparently EagleCAD was bought
> by Autodesk back in 2016.)
>
> I am wondering if openeeg is still an active or viable project? If I
> go through all of the hardware purchasing and build a unit will I be
> able to use it for neurofeedback? Are there other projects that might
> be more up to date or active?
>
> Thank you,
> Sean
>
>
> _______________________________________________
> Openeeg-list mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/openeeg-list
> Go to the above address to change your
> subscription options, e.g unsubscribe.
>

--00000000000023c3660629de4999
Content-Type: text/html; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable

<div dir=3D"ltr"><div>Hi, OpenEEG could be considered a legacy project, but=
 depending on your use-case it might still be worth to look into. It is sti=
ll purchasable from Olimex for example (<a href=3D"https://www.olimex.com/P=
roducts/EEG/OpenEEG/">https://www.olimex.com/Products/EEG/OpenEEG/</a>). Or=
 you can make your own/customize existing projects, as the PCB designs and =
circuit schematics are freely available. That might not be true for other p=
rojects, although there are multiple more modern open-source projects (e.g.=
 OpenBCI). The fundamentals of the OpenEEG still work, although you might s=
ubstitute some legacy components because they might not be available anymor=
e. But you can still build one if you wish to even today, it is interesting=
 to learn the fundamentals of how EEG devices work.<br></div><div><br></div=
><div>I recently translated the documentation of my OpenEEG build project f=
rom 2018. The goal of the project was to customize and manufacture an OpenE=
EG device based on EEG-SMT by Olimex in school environment, including the P=
CB and electrodes.(<a href=3D"https://github.com/splithor1zon/EEG-ReMake">h=
ttps://github.com/splithor1zon/EEG-ReMake</a>) I believe my EEG is also ext=
ensible to 6 channels, as I prepared an extension connector for an extensio=
n board. However, I never developed an extension board. Back then it cost m=
e around 100=E2=82=AC to manufacture the device, so it still could be signi=
ficantly cheaper than more modern alternatives. EEG-SMT from Olimex with ac=
tive electrodes costs around 150=E2=82=AC, so that is also possibility, but=
 it&#39;s only limited to two channels.<br></div><div><br></div><div>The Ea=
gle software was acquired by Autodesk, but the .sch and .brd files should s=
till be compatible by modern Autodesk Eagle software. <br></div><div><br></=
div><div><div dir=3D"ltr" class=3D"gmail_signature" data-smartmail=3D"gmail=
_signature"><div dir=3D"ltr"><div>S pozdravom,</div><div>Dami=C3=A1n Filo<b=
r></div></div></div></div><br></div><br><div class=3D"gmail_quote gmail_quo=
te_container"><div dir=3D"ltr" class=3D"gmail_attr">so 21. 12. 2024 o=C2=A0=
19:09 Sean Tischler &lt;<a href=3D"mailto:[email protected]">aeternus@gmai=
l.com</a>&gt; nap=C3=ADsal(a):<br></div><blockquote class=3D"gmail_quote" s=
tyle=3D"margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);pad=
ding-left:1ex">Hello,<br>
<br>
I recently found the openeeg website while searching for ways to do at<br>
home neurofeedback. I am starting to go through all of the pages and<br>
documentation and notice there are a lot of links and references that<br>
are old or out of date (for example the FAQ page mentions getting<br>
EagleCAD from cadsoft and a link to <a href=3D"http://www.cadsoft.de" rel=
=3D"noreferrer" target=3D"_blank">www.cadsoft.de</a>. This website is<br>
now a financial software developer and apparently EagleCAD was bought<br>
by Autodesk back in 2016.)<br>
<br>
I am wondering if openeeg is still an active or viable project? If I<br>
go through all of the hardware purchasing and build a unit will I be<br>
able to use it for neurofeedback? Are there other projects that might<br>
be more up to date or active?<br>
<br>
Thank you,<br>
Sean<br>
<br>
<br>
_______________________________________________<br>
Openeeg-list mailing list<br>
<a href=3D"mailto:[email protected]" target=3D"_blank">Ope=
[email protected]</a><br>
<a href=3D"https://lists.sourceforge.net/lists/listinfo/openeeg-list" rel=
=3D"noreferrer" target=3D"_blank">https://lists.sourceforge.net/lists/listi=
nfo/openeeg-list</a><br>
Go to the above address to change your<br>
subscription options, e.g unsubscribe.<br>
</blockquote></div>

--00000000000023c3660629de4999--


--===============5213477088122609865==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline


--===============5213477088122609865==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline