Re: Problem setting up FireQOS on A-DSL with PPPoE

Florian Schröck <[email protected]>
Newsgroups gmane.comp.security.firewalls.firehol.user
Message-ID <CAJduyanF9BJKYaEXmTzeQk=dE2qVNQmx0pmnMMJv2B5VkH+Tyg@mail.gmail.com>
Hello again,
with the ifb module it is working now! Is there a way i can classify
high-volume HTTP downloads, eg. by the target domain, maybe even with a
wildcard - like *.somehost.com?
To keep surfing smooth while a big download is running.

Thanks!


2013/11/2 Florian Schröck <[email protected]>

> Hello Costa,
> thanks for the fast reply!
>
> Indeed there is no ifb module. I'm runinng Raspberian, a Debian variant:
> Linux raspberrypi 3.6.11 #1 PREEMPT Sat Sep 21 21:12:11 CEST 2013 armv6l
> GNU/Linux
>
> I'm recompiling my kernel with ifb enabled now. This takes a day on the
> Raspberry Pi though ;)
>
>
>
> 2013/11/2 Tsaousis, Costa <[email protected]>
>
>> Hi Florian,
>>
>> Thanks for trying FireQOS.
>>
>> It seems that your kernel does not have the IFB module. What distro
>> are you using? Which kernel version?
>>
>> To verify you don't have IFB in kernel, fo this:
>>
>> # modprobe ifb
>>
>> does it work?
>>
>> Without IFB in your kernel, you are limited to use FireQOS for traffic
>> control on the output of interfaces only. Copy and paste only the
>> output interface to see it working.
>>
>> Regards,
>>
>> 2013/11/2 Florian Schröck <[email protected]>:
>> > Hello,
>> > I was looking for a traffic shaping solution for my home network and i
>> love
>> > firehol i stumbled upon fireqos. To get started i just pasted the
>>  complete
>> > example from the howto and changed the DEVICE=ppp0 and the speeds.
>> > ppp0 is my PPPoE device on my raspberry pi from a german DSL provider.
>> But
>> > at the start i just get the errors below. Can somebody point me in the
>> right
>> > direction?
>> > Thank you!
>> >
>> > FireQOS $Id: 3bd5794f2e29d2748784acd5d7810d54ba1e99e2 $
>> > (C) 2013 Costa Tsaousis, GPL
>> >
>> >
>> > : interface ppp0 world-in input rate 14000kbit adsl local
>> pppoe-llcCannot
>> > find device "ppp0-ifb"
>> >
>> > FAILED: Cannot bring device ppp0-ifb UP.
>> > FAILED TO ACTIVATE TRAFFIC CONTROL.
>> >
>> > Clearing failed interface: world-in (ppp0 input => ppp0-ifb)...
>> >
>> >          ppp0-ifb: ./fireqos.in: line 334: interface_inout: command not
>> > found
>> > cleared traffic control
>> >          ppp0-ifb: removed IFB device
>> >
>> > No traffic control is operational by FireQOS
>> >
>> > bye...
>> >
>> >
>> > _______________________________________________
>> > Firehol-support mailing list
>> > [email protected]
>> > http://lists.firehol.org/mailman/listinfo/firehol-support
>>
>
>

_______________________________________________
Firehol-support mailing list
[email protected]
http://lists.firehol.org/mailman/listinfo/firehol-support
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.