Re: SBC Integrated in Dell Server - Info?

Wayne Fiori <[email protected]>
Newsgroups gmane.comp.security.firewalls.m0n0wall
Message-ID <[email protected]>
Search on "single board computer pci" or "single board computer
pc/104" and you'll find vendors that make stuff similar. That is, it
fits into a PCI slot (double width for the cooling fans) and has all
the I/O connectors available through the PCI face.

I had an ISA version of this eons ago, but the keyboard and serial
ports were on the face plate. It was a 133MHz AMD K5 with 32MB RAM.
(woot)
--
=Wayne


On Tue, Jun 9, 2009 at 6:38 PM, Melvin<[email protected]> wrote:
> Gonzalo, where are you?!  Any guidance on acquiring that slick little
> adapter with the cables?  It certainly doesn't look homemade, but maybe it
> was salvaged from something else.
>
>
> Chris Buechler wrote:
>>
>> On Mon, Jun 8, 2009 at 2:05 PM, Tim Nelson<[email protected]> wrote:
>>
>>>
>>> Greetings list! I've just stumbled upon this on the m0n0wall site:
>>> http://m0n0.ch/wall/gallery/278.jpg
>>>
>>> Someone has mounted an SBC (looks to be a PC Engines WRAP1E203 ) mounted
>>> inside of a Dell Poweredge 2x50 server. While that is very interesting, the
>>> part I found most interesting was the NIC/power bracket mounted in the PCI
>>> slot bracket. Where would a person find something like that? I could make my
>>> own with some RJ45 jacks, etch a circuit board, and fasten to a PCI bracket,
>>> but where's the fun in that? :-D
>>>
>>>
>>
>> Wow, first I'd seen that picture. Neat. I'm also curious where that
>> slot bracket came from. I suspect it's custom made.
>>
>>
>>
>>>
>>> The reason why I ask is that most colo providers will charge for
>>> additional rack space for a firewall. Why not just put your firewall inside
>>> your server and save some cash? :-)
>>>
>>>
>>
>> yeah!  Nice colo in a box solution there. DRAC management on one port,
>> server on another, upstream on the third. Not sure where the second
>> NIC on the server is going, apparently not to the firewall. Very cool
>> solution for a small colo.
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [email protected]
>> For additional commands, e-mail: [email protected]
>>
>>
>>
>>
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [email protected]
> For additional commands, e-mail: [email protected]
>
>
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.