Re: m0n0wall 1.3b18 : file system full

Thanks for you answer.
My hardware is a pentium IV with 512 mB of RAM
More than 200 students are connected.

I set only "Captive portal" and syslog is enable on a remote server

Before I reboot, I saw that memory  was only 15% busy
and logs said "file system full"

Merci

--
Richard MANAS  -  D.S.I.  Université de Nice Sophia Antipolis
28, avenue de Valrose - BP 2135 - 06103 NICE CEDEX 2 - FRANCE
Phone : 04.92.07.67.07       Fax : 04.92.07.67.00
email : [email protected]         http://nephi.unice.fr/



John Stoffel a écrit :
> Richard> I use m0n0wall 1.3b18 on CDrom and USB key configuration as a wifi 
> Richard> captive portal.
> Richard> Some time, it does not accept any more connection.
> Richard> I got messages  :
> Richard> Logs/System :  kernel: pid 141 (dhcpd), uid 0 inumber 3205 on /: 
> Richard> filesystem full
> Richard> Logs/DHCP : dhcpd: commit_leases: unable to commit: No space left on device
> Richard> What can I do ?
>
> What type of hardware are you using?  You probably need more RAM on
> the system so that you have more room for logs and the DHCP leases
> file. 
>
> Clean out your logs, or turn down the logging level as well. 
>
> I assume you just reboot to clear the issue?  If so, before you do
> that next time, try to look in the web interface to see how the memory
> usage is, and what the logs look like.
>
> John
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [email protected]
> For additional commands, e-mail: [email protected]
>
>
>