setting VLAN

Hi,

I'm struggling somewhat with something that should be easy.

Inside a XenCitrix Box, I've set a virtual monowall 1.3. I would like to 
set the LAN interface to work in a given VLAN (say vlan 10).

To do that, in Interfaces(assign)/VLAN I've create the VLAN with id 10, 
on the internal physical interface (re1 here. re0 is the WAN interface).

Next, in Interfaces(assign)/VLAN I've set the LAN interface to be this 
new VLAN.

After reboot, I've set the IP address (172.16.0.2, for tests).

Unfortunately, it did not work. Other virtual machines in the same 
physical server do manage to acess this same vlan properly (Tested with 
a Debian install). From the Monowall install, with icmp, I can't reach 
other machines, and neither do other machines reach the server.

Did I miss something? According to http://m0n0.ch/wall/hardware.php, re 
interfaces do support vlans.

Thank you for your help,

Roberto Greiner

-- 
   -----------------------------------------------------
                 Marcos Roberto Greiner

    Os otimistas acham que estamos no melhor dos mundos
     Os pessimistas tem medo de que isto seja verdade
                                   James Branch Cabell
   -----------------------------------------------------