FW: Help! m0n0wall does not run well on Intel Atom Board PART 2!!

Sorry

Let me rephrase my sentences, sorry I was tired, I realized what I wrote
didn't make sense:

Hi Cheeyong and all monowallist out there,

So I downloaded the image that Cheeyong recommended. It ran great with the
on-board lan from the D945GCLF board which uses realtek 8111, I think. Now I
purchased the second card, and this time I made sure I purchased the correct
card.

Then, I bought another LAN card with RTL8139D chipsets for the second LAN. I
checked with m0n0wall site to make sure that the card is compatible.
Although, I am still trying to search the link again. I was so excited, did
not realize that I need to keep the site link for reference.

However, a new problem occurs, m0n0wall was able to detect both cards
(on-board and additional) when it was still not assigned. But after I
assigned the additional card either as LAN or WAN, the additional card stops
working (no up link) after finished rebooting the m0n0wall. I tried to
reboot many times and it is still the same. 

The ON-BOARD LAN card though, still OK. Is this because I used the same
brand of realtek cards? As usual, I tried linux ubuntu 9.04 with 2 lan cards
on and I can access the additional card well.

Please help anyone... I am dying here ..

Thank you in advance.


-----Original Message-----
From: GD Incorporation [mailto:[email protected]] 
Sent: Wednesday, May 19, 2010 12:00 AM
To: 'Tew Chee Yong'; '[email protected]'
Subject: Help! m0n0wall does not run well on Intel Atom Board PART 2!!

Hi Cheeyong and all monowallist out there,

So I downloaded the image that Cheeyong recommended. It ran great with the
on-board lan from the D945GCLF board which uses realtek 8111, I think. Now I
purchased the second card, and this time I made sure I purchased the correct
card.

So, I bought a LAN card with RTL8139D chipsets, I checked with m0n0wall site
that the card is compatible. Although, I am still trying to search the link
again. I was so excited, did not realize that I need to keep the site link
for reference.

However, a new problem occurs, m0n0wall was able to detect both cards when
it is still to assigned. But after I assingned the additional card either as
LAN or WAN, the card stops working (no up link) after finished rebooting the
m0n0wall. I tried to reboot many times and it is still the same. 

The LAN card though still OK. Is this because I used the same realtek cards?
As usual, I tried linux ubuntu 9.04 with 2 lan cards on and I can access the
additional card well.

Please help anyone... I am dying here ..

Thank you in advance.

-----Original Message-----
From: Tew Chee Yong [mailto:[email protected]]
Sent: Tuesday, May 18, 2010 8:09 AM
To: [email protected]
Cc: [email protected]
Subject: RE: Help! m0n0wall does not run well on Intel Atom Board!!!

Hi,

Check out this thread. The image works for me.

http://forum.m0n0.ch/index.php?topic=3135.msg11156

Cheeyong


-----Original Message-----
From: GD Incorporation [mailto:[email protected]]
Sent: Tuesday, 18 May, 2010 5:50 AM
To: [email protected]
Subject: Help! m0n0wall does not run well on Intel Atom Board!!!

Dear all m0n0wall-ist
 
I just purchased Intel Atom Board D945GCLF and added one more EThernet card
to its PCI slot. I run m0n0wall generic PC image with version 1.32 (Latest),
but it does not work right. It couldn't recognize all of the ethernet cards.
First I thought that the other card causes the problem, so I removed the
additional card and rebooted m0n0wall with just the embedded card. But still
no card was recognized.
 
Does anyone ran into the same problem? Any help for solution?
 
I believe the LAN Card is Realtek RTL8102EL. Please help. I cannot return
the board since it is already purchased. I tried to another Same version
intel atom board and it produced the same errors.
 
I ran ubuntu linux to double check, but ubuntu was able to detect it and
make the embedded lan card works just fine.
 
THanks
Rendra
 
Authorized Dealer:
GD Systems
031-6019-5271
031-6070-8371
[email protected]
[email protected]