Re: setting up an IPv6 tunnel

Hello Brian,

I have a static tunnel with tunnelbroker up and running. Configuration
on WAN side is just:
IPv6 Mode = Tunnel
IPv6 Address = 2001:470:12:34::2
IPv6 tunnel endpoint = 216.66.80.98

Futhermore you need to create a IPv4 Firewall Rule that allows a ping
from HE. If not the tunnel will not work.

HTH

Regards,

Jakob

On 18 March 2011 00:22, Brian Lloyd <[email protected]> wrote:
> I have been using m0n0wall as the termination of a 6to4 tunnel without
> problems. Now I am trying to set up a static IPv6-in-IPv4 tunnel to a tunnel
> broker (Hurricane Electric). Seems to me that I need to specify my own WAN
> IPv6 address, the remote end of the IPv4 tunnel, the IPv6 address (gateway)
> at the far end of the tunnel, and then I need to set up my routable /64 IPv6
> block on my LAN interface. I am not having any success.
>
> Has anyone done a quick-and-dirty list of what needs to be set up to create
> an IPv6 tunnel?
>
> Thanks in advance.
>
> --
> Brian Lloyd, WB6RQN/J79BPL
> 3191 Western Dr.
> Cameron Park, CA 95682
> [email protected]
> +1.767.617.1365 (Dominica)
> +1.931.492.6776 (USA)
> (+1.931.4.WB6RQN)
>