RE: Port Forwarding problem on 2023
Frank Bello <[email protected]> Wed, 24 Apr 2013 17:12:54 +0000
| Newsgroups | gmane.comp.security.firewalls.m0n0wall |
|---|---|
| Message-ID | <dd1c99d8578c4be2bbeaa0f2268ad1b9@BY2PR07MB074.namprd07.prod.outlook.com> |
Never mind! Dan, thanks for the input. I went back to the guy that administers the unix server... He updated the IP configuration to work in the new environment that we setup and he 'forgot' to set the gateway address. So the M0n0wall was working correctly but the replies could never get back out. User error. ;-)) Thanks all Frank -----Original Message----- From: Daniel Jokinen [mailto:[email protected]] Sent: Wednesday, April 24, 2013 2:25 AM To: [email protected] Subject: [m0n0wall] SV: Port Forwarding problem on 2023 Hi Frank, Usually whenever I get these kinda problems I delete the rule and set it again, which always seems to work. Make sure you use the "auto add firewall rule" when creating the NAT rule, failure to do so can cause problems I know from experience. However, it that doesn't work I'd start looking in the other end first. Does port 2023 work internally? Is there a firewall in use at the unix server side? Can you access canyouseeme.org from the unix server and see if it actually does work and there's something else all together? /Daniel Jokinen -----Ursprungligt meddelande----- Från: Frank Bello [mailto:[email protected]] Skickat: den 24 april 2013 03:16 Till: [email protected] Ämne: [m0n0wall] Port Forwarding problem on 2023 All, I've been testing the M0n0wall appliance in an ESX 3i host and have been very pleased with it. However I wonder if someone can help me find out how come a port/NAT forwarding rule that I'm trying to set for port 2023 is not working. The rule allows access to the outside TELNET clients to an internal UNIX server which is listening for TELNET connections on port 2023 I have setup forwarding rules for RDP on 3389 and for VMWARE client management on SSL and other private ports and it works perfectly. However when I tell it to forward 2023 it does not. And only in that rule. I have also tried to create another rule where the external port 23 will be forwarded to the internal 2023, but that does not work neither Following are the pages from my setup. Any help ? thanks in advance. F. Bello Firewall: NAT: Inbound InboundServer NAT1:1Outbound If Proto Ext. port range NAT IP Int. port range Description WAN TCP 3389 10.10.10.10 3389 RDP Service WAN TCP/UDP 443 (HTTPS) 10.10.10.100 443 (HTTPS) VMWARE SSL WAN TCP/UDP 902 - 903 10.10.10.100 902 - 903 VMWARE WAN TCP/UDP 2023 10.10.10.11 2023 UNIX Server Access Firewall: Rules LAN WAN Proto Source Port Destination Port Description TCP * * 10.10.10.10 3389 NAT RDP Service TCP/UDP * * 10.10.10.100 902 - 903 NAT VMWARE TCP/UDP * * 10.10.10.100 443 (HTTPS) NAT VMWARE SSL TCP/UDP * * 10.10.10.11 2023 NAT --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]