Re: only 10mbit since v1.8.1 on alix
Fred Grayson <[email protected]> Mon, 31 Mar 2014 12:53:56 -0400
| Newsgroups | gmane.comp.security.firewalls.m0n0wall |
|---|---|
| Message-ID | <[email protected]> |
On 3/31/2014 12:12 PM, Rene Moser wrote: > Hi > > I received my new cable connection having 50mbit today. > > But short after installation I noticed, I only get 10mbit through. > > So I started a debug session in which turned out the alix router running > m0n0 v1.8.1 to be the bottle neck (the interfaces status shows 100baseTX > <full-duplex>). > > Then I replaced the box with another identical alix hardware, having a > CF card with m0n0 v1.34 installed. Tested again and then I get the > 50mbit through. > > Then I cross checked: I moved the CF card with m0n0 v1.34 to the alix > box where I had only 10mbit before. I also get 50mbit now. > > This means somehow I only get 10mbit running m0n0 v1.8.1 on alix. > > Is anyone running m0n0 on alix v1.8.1 with > 10mbit? > What may have caused this issue? Let me know if I can help debugging. > > Regards > René > I am running m0n0wall 1.8.2b571 on ALIX alix2c3 and have no problem exceeding 25mbps on my Comcast connection.