Re: problen with gnomemeeting

Thank.
I was searching in google too and in manual of gnomemeeting but I can't 
make it go because the problem was not in smoothi, the problem was in 
gnugk that I must put local network direction like 0.0.0.0/0.0.0.0 
because smoothi is transparent due to the net attached to gnugk is not 
local net but all Internet.
In all the way right now with your mail I'm going to close same port 
because probing I think I open too much port not need for nothing but 
for safety right.


Tim Bolding escribis:

>Ok from the website I found this
>
>http://www.gnomemeeting.org/index.php?rub=3&pos=0&faqpage=x266.html
>
>Most of them will require that you disable H.245 Tunneling and Fast
>Start in the "H.323 Advanced Settings" section of GnomeMeeting.
>Here is the list of ports that you need to allow and forward to your
>internal computer:
>
>    *
>
>      TCP port 1720, that port can be changed if you modify the
>"/apps/gnomemeeting/ports/listen_port" key using gconf-editor,
>    *
>
>      TCP port range [30000-30010], that range of ports can be changed
>if you modify the "/apps/gnomemeeting/ports/tcp_port_range" key using
>gconf-editor, if you and the remote H.323 software calling you are both
>using H.245 Tunneling, then you don't need to allow and forward this
>range of ports. Netmeeting doesn't support H.245 Tunneling, so you
>always need to allow and forward this range of ports if you plan to call
>or be called by Netmeeting clients.
>    *
>
>      UDP port range [5000-5007], that range of ports can be changed if
>you modify the "/apps/gnomemeeting/ports/rtp_port_range" key using
>gconf-editor. This port range is used for the RTP and RTCP channels for
>audio and video transmission/reception. This port range is mandatory.
>    *
>
>      UDP port range [5010-5013], that range of ports can be changed if
>you modify the "/apps/gnomemeeting/ports/udp_port_range" key using
>gconf-editor. This port range is used when registering to a gatekeeper.
>You don't need to allow and forward those ports if you don't plan to
>register to a gatekeeper. 
>
>Those ports are the ports that will be used locally by GnomeMeeting.
>There can be incoming connections to those ports even if you are calling
>the remote user yourself.
>
>
>
>
>>From your config it looks like you opened 5000-5003. Some applications
>from my experience will open the higher number first.. and some the
>lower number first. You will want to try opening up 5000-5007 per the
>doco. I would also change the setting reference at the top. I hope this
>helps. 
>
>Tim
>
>
>-----Original Message-----
>From: [email protected]
>[mailto:[email protected]] On Behalf Of Antonio Trujillo
>Carmona
>Sent: Monday, October 11, 2004 7:24 PM
>To: [email protected]
>Subject: [gpl] problen with gnomemeeting
>
>I'm try to make work a connection with gnomemeeting and netmiteeng using
>
>a dinamic dns (hn.org) I try without smoothi and it work but with 
>smoothi I always obtain that is impossible to connect throw port 1720.
>Of course I open that port
>Proto    External source IP    Source port    Destination IP    
>Destination port
>TCP      ALL                   1720            192.168.1.5         N/A
>TCP      ALL                   80              192.168.1.5         N/A
>TCP      ALL                   30000:30010     192.168.1.5         N/A
>UDP      ALL                   5010:5013       192.168.1.5         N/A
>UDP      ALL                   5000:5003       192.168.1.5         N/A
>UDP      ALL                   80              192.168.1.5         N/A
>TCP      ALL                   20000           192.168.1.5         N/A
>TCP      ALL                   40000:40999     192.168.1.5         N/A
>TCP      ALL                   50000:59999     192.168.1.5         N/A
>TCP      ALL                   1719            192.168.1.5         N/A
>TCP      ALL                   22              192.168.1.5         N/A
>UDP      ALL                   1720            192.168.1.5         N/A
>TCP      ALL                   5010:5013       192.168.1.5         N/A
>TCP      ALL                   5000:5003       192.168.1.5         N/A
>UDP      ALL                   1719            192.168.1.5         N/A
>TCP      ALL                   7000            192.168.1.5         N/A
>Can some one help?.
>Thank
>_______________________________________________
>gpl mailing list
>[email protected]
>http://lists.smoothwall.org/mailman/listinfo/gpl
>
>SmoothWall Stash - Buy Our Stuff! http://cafepress.com/smoothwall
>_______________________________________________
>gpl mailing list
>[email protected]
>http://lists.smoothwall.org/mailman/listinfo/gpl
>
>SmoothWall Stash - Buy Our Stuff! http://cafepress.com/smoothwall
_______________________________________________
gpl mailing list
[email protected]
http://lists.smoothwall.org/mailman/listinfo/gpl

SmoothWall Stash - Buy Our Stuff! http://cafepress.com/smoothwall