Re: BeWan PCI ADSL Modem

Hi Dave,

You'll have to enter the set up menu first using your 'setup' password that 
you set up when you first installed the system.

Select the ADSL Configuration option from the Section Menu in the set up 
screen (see 2.4.2 Section Menu of the Installation Guide - install.pdf). 
This will take you to ADSL Configuration Menu (see 2.4.7 ADSL Configuration 
of the Installation Guide - install.pdf) and then select device type and I 
think you should find the BeWan PCI ADSL Modem right at the bottom of the 
list which is then displayed. The Other Settings option under the ADSL 
Configuration Menu is to set the Modem parameters.

Cheers,


Peter

At 06:29 16/11/2004, you wrote:

>Message: 4
>From: "David Southworth" <[email protected]>
>To: <[email protected]>
>Date: Mon, 15 Nov 2004 14:25:37 -0000
>Subject: [gpl] BeWan PCI ADSL Modem
>
>Hi, I am planning to build a new Smoothie with the BeWan PCI ADSL modem,
>searching the web suggests its supported in 2.0. On my smoothwall 2 box
>here I can find no mention of where it is set up, nor can I find any
>reference online as to how its installed.
>
>Is the reason I can't see the Setup on my box because the card isn't
>installed on the machine and when it is detected it only then "shows up"
>or if not how is it installed?
>
>TIA
>
>Dave
_______________________________________________
gpl mailing list
[email protected]
http://lists.smoothwall.org/mailman/listinfo/gpl

SmoothWall Stash - Buy Our Stuff! http://cafepress.com/smoothwall