Re: Login straight to priv mode in PIX with TACACS server

Michel,

If you set the PIX to use tacacs+ and then local it will use local if
it cannot contact the TACACS+ server, The easiest way to make sure it
cannot contact the TACACS+ server is to remove the network cables.

On 6 February 2010 15:32, Michel Ferreira <[email protected]> wrote:
> Hi,
>
> I've successfully configured my PIX 506E (6.3) to authenticate with my
> TACACS+ Server (ACS 4.1), however I want to know if there's any way to
> put the user straight in priv mode (enable) just after login, without
> the need to input the 'enable' command.
>
> I'm questioning this because I don't want to include the "aaa
> authentication enable console tacacs+ LOCAL" command, since with this
> command if I need console access I still will be authenticating
> against the TACACS+ server, which, in a emergency situation (like one
> that i need to physically connect a console cable to the firewall)
> I'll be using the remote authentication, and I don't want that.
>
> Thanks for your considerations,
>
> Michel
> _______________________________________________
> firewall-wizards mailing list
> [email protected]
> https://listserv.icsalabs.com/mailman/listinfo/firewall-wizards
>