Re: newbe question - roo with 2 network nterfaces

On Fri, 26 Aug 2005, JJ wrote:

> Have a look at
>
> https://bugs.honeynet.org/show_bug.cgi?id=350

You guys found a bug (or in this case, bad documentation).  You cannot
use the br0 interface for remote management.  You will need to add a
third physical interface (or virtual interface within VMware) to support
remote management.   This is the only way we have tested the current
Honeywall functionality.

Thanks!

lance



>
>
> JJ.
>
>
>
> [email protected] wrote:
>
> >Hi all,
> >
> >I am running a roo honeywall in bridge mode and it is bridging well.
> >Unfortunately I just have 2 network interfaces, and I need to run the management interface and ntp requests on the internal interface (eth1), which belongs to br0.
> >
> >-----------------br0-----------------
> > |                                                                                  |
> >external  eth0                                        internal eth1  - - -    ntp-Server,
> >                                                                                                       HwManager,
> >                                                                                                       and some Honeypots
> >
> >HwMANAGER and HwTIME_SVR are configured with the right IPs.
> >HwMANAGE_IFACE = br0 HwMANAGE_IP and corresponding netmask  are set. A gateway is not necessary, because is is in the same net. HwRESTRICT is enabled.
> >But if I start the honeywall with /usr/local/bin/hwctl -s -p /etc/honeywall.conf, br0 is not assigned with MANAGE_IP as it is said in the comment. ???
> >
> >I manually configured br0  (ifconfig br0 IP broadcast netmask). I can only ping my own IP. Pinging e.g. the ntp-Server IP I have 100% packed loss.
> >I tryed both ROACHMOTEL enabled an disabled, without any effect on the result.
> >
> >Walleye is running correctly. Once I changed HwLAN_IFACE and HwINET_IFACE to br0 and configured eth1 manually as a management interface.  As a result honewall was not bridging anymore, but I had access on Walleye and ntpdate worked as well.
> >
> >eth1is in promiscuous mode, but that shouldn't be the reason for not sending, is it?
> >Are there any firewall rules that are discarding icmp traffic?
> >
> >If no idea what to do now.
> >Bye and thanks for your answers,
> >Uta
> >_________________________________________________________________________
> >Mit der Gruppen-SMS von WEB.DE FreeMail können Sie eine SMS an alle
> >Freunde gleichzeitig schicken: http://freemail.web.de/features/?mc=021179
> >
> >
> >
> >
> >
> >
>