Re: Hyperscan and ERROR: rules/snort.rules:3208 can't compile content ''

Further to my previous message, I added a code to print error message 
given by Hyperscan.

So here is the error message:

ERROR: rules/snort.rules:2210 can't compile content '', error message: 
'Pure literal API doesn't support empty string.'

So it seems that snort is sending empty strings to Hyperscan on certain 
systems. (Or hyperscan is treating it as empty strings)

Can snort developers please look into it?

I can try to provide more information if required.

Thank you,

Regards

Amish.

On 22/06/23 06:52, Amish wrote:
> Hello Adrian,
>
> Thank you for your reply.
>
> On 22/06/23 01:56, Adrian Mamolea (admamole) wrote:
>> Hello Amish,
>>
>> For:
>> ERROR: rules/snort.rules:3208 can't compile content ''
>> I would expect the pattern between quotes. Did you remove it?
>
> No, rules are fetched using pulledpork v3 and same rules work on 
> another machine with Intel Core 2 Duo.
>
> And yes till now even I was surprised why the content is empty in 
> ERROR message.
>
> But I just checked all the rules where snort gives error, all those 
> rules have content starting with "00", which gets treated as EMPTY 
> string as it begins with NUL byte.
>
> For example: (I use snort community rules)
>
> alert udp $EXTERNAL_NET any -> $HOME_NET 111 ( msg:"PROTOCOL-RPC 
> portmap SET attempt UDP 111"; flow:to_server; content:"|00 01 86 
> A0|",depth 4,offset 12; content:"|00 00 00 01|",within 4,distance 4; 
> content:"|00 00 00 00|",depth 4,offset 4; metadata:policy 
> max-detect-ips drop,ruleset community; service:sunrpc; 
> classtype:rpc-portmap-decode; sid:1950; rev:13; )
>
> alert udp $EXTERNAL_NET any -> $HOME_NET 500 ( msg:"SERVER-OTHER 
> ISAKMP second payload initial contact notification without SPI 
> attempt"; flow:to_server; content:"|0B|",depth 1,offset 28; 
> byte_jump:2,30; content:"|00 0C 00 00 00 01 01 00|`|02|",within 
> 10,distance -2; metadata:policy max-detect-ips drop,ruleset community; 
> reference:bugtraq,9416; reference:bugtraq,9417; 
> reference:cve,2004-0164; classtype:misc-attack; sid:2415; rev:16; )
>
> In some rules there are multiple contents, but atleast one content 
> starts with "00"
>
> In short, any rule where there is a content starting with "00", snort 
> fails and gives FATAL error.
>
> So it looks like (for certain specific systems) either its snort bug 
> somewhere which sends "empty" content to hyperscan OR its hyperscan 
> bug which treats strings starting with "00" as NUL.
>
>> Otherwise, since commenting out hyperscan made it work, I would 
>> suspect hyperscan issues on this host, and rules probably OK.
>> See https://github.com/snort3/snort3/issues/171 for similar issue.
> Above link and other links given inside that link suggest:
>
> 1) Use physical core - but I am already using physical machine and not 
> virtual machine
> 2) CPU should have ssse3 - I am using i3 9th generation and 
> /proc/cpuinfo indeed lists ssse3
>
> I am not a coder but will try to debug further on whatever I can but 
> just in case you can figure out the problem based on above, then 
> please do check.
>
> Thank you
>
>> Adrian
>>
>> -----Original Message-----
>> From: Snort-users <[email protected]> On Behalf Of 
>> Amish via Snort-users
>> Sent: Tuesday, June 20, 2023 12:21 AM
>> To: [email protected]
>> Subject: [Snort-users] Hyperscan and ERROR: rules/snort.rules:3208 
>> can't compile content ''
>>
>> Hello,
>>
>> I am using Arch Linux with snort version as follows:
>>
>>     ,,_     -*> Snort++ <*-
>>     o"  )~   Version 3.1.63.0
>>      ''''    By Martin Roesch & The Snort Team
>>              http://snort.org/contact#team
>>              Copyright (C) 2014-2023 Cisco and/or its affiliates. All
>> rights reserved.
>>              Copyright (C) 1998-2013 Sourcefire, Inc., et al.
>>              Using DAQ version 3.0.11
>>              Using LuaJIT version 2.1.0-beta3
>>              Using OpenSSL 3.1.1 30 May 2023
>>              Using libpcap version 1.10.4 (with TPACKET_V3)
>>              Using PCRE version 8.45 2021-06-15
>>              Using ZLIB version 1.2.13
>>              Using Hyperscan version 5.4.2 2023-04-22
>>              Using LZMA version 5.4.3
>>
>> I am running it on Intel i3-9100T CPU (Dell Optiplex 3070)
>>
>> But there are hundreds of lines as follows:
>>
>> ERROR: rules/snort.rules:3208 can't compile content ''
>>
>> Snort crashes with following error:
>> Jun 20 09:36:34 foo snort[27985]: FATAL ERROR: see prior 721 errors (0
>> warnings)
>>
>> But this same version (with exact same package file) works fine on an
>> older machine with Intel Core 2 Duo. Both machines have identical
>> packages installed.
>>
>> I have following line in local.lua file
>>
>> -- Enable hyperscan for IPS, AppID, HTTP inspection, pcre/regex matches
>> search_engine = { search_method = "hyperscan" }
>> detection = { hyperscan_literals = true, pcre_to_regex = true }
>>
>> With this line it works fine on Intel Core 2 Duo machine but not work on
>> Intel i3-9100T.
>>
>> If I comment above two config lines, then snort starts fine.
>>
>> What could be the issue? And how can I solve this?
>>
>> Thank you
>>
>> Amish.
_______________________________________________
Snort-users mailing list
[email protected]
Go to this URL to change user options or unsubscribe:
https://lists.snort.org/mailman/listinfo/snort-users

	To unsubscribe, send an email to:
	[email protected]

Please visit http://blog.snort.org to stay current on all the latest Snort news!

Please follow these rules: https://snort.org/faq/what-is-the-mailing-list-etiquette