RE: HSRP under attack ... or just Cisco glitch andhickup?!?

ne more info... or feed back off list...
I have recently seen an outage in a client 
that has simmilar equiptment.. 

all critical servers behind the equipt were up... 
just all trafic X it suddenly dropped. 

our time line was 
nov 27 11:30 CST 
to aprox... 
nov 27 2:00 am CST.

we're investigating too
...

> -----Original Message-----
> From: [email protected] 
> [mailto:[email protected]] On Behalf Of Stef
> Sent: November 27, 2004 16:28
> To: General DShield Discussion List; [email protected]
> Subject: [Intrusions] HSRP under attack ... or just Cisco 
> glitch andhickup?!?
> 
> 
> Sorry for cross-posting - but who knows where an idea or 
> prior experience sharing may be coming from?!? ;)
> 
> We have just recovered from a network disaster, and I will 
> start in a little while looking through some logs. Meanwhile 
> - I just thought of picking some analyst brains here - in 
> regards to an odd incident.
> 
> Environment: dual Cisco 6500, in HSRP mode, running 
> 12.1(11b)E. These two have some FastEth and GiGE blades, 
> connecting servers, and are also redundantly connected to 
> some 4000s, which connect to workstations. Same 6500s are 
> connected (redundantly, also) to a pair of Checkpoint 
> firewalls, running VRRP, for Internet connectivity, and some 
> other Netscreen firewalls, for other type of network segregation 
> (very simplistic description - no need here to describe all 
> sorts of VLANs, as I do not deem that significant to this)
> 
> Problem: at around 3:00AM this morning there was absolut no 
> connectivity in the network. Specific probes, placed on some 
> spanned ports, for specific device monitoring, were not 
> capturing any traffic. No DHCP machines could get to the DHCP 
> server. The firewall internal interface was showing two types 
> of messages: 1. MAD - land_attack - from the two interfaces 
> of the 6500s connected to it, destined to the localhost 
> (127.0.0.1) - logged 2. protocol 112 traffic (which is VRRP) - dropped
> 
> The 6500s - if connected to the console - would just show 
> gibberish scrolling very fast on the terminal screen. Their 
> utilization lights (on the hardware itself) were showing above 90%.
> 
> The netscreens connected were the closest to having been able 
> to capture something significant: UDP flood from the two 
> 6500s, on port 1985, destined to 127.0.0.1, port 1985.
> 
> This last piece of information led me to assuming something 
> like: 
> http://cert.uni-stuttgart.de/archive/bugtraq/2002/06/msg00043.html
> but - as I was not able to get my hands on any significant 
> logs yet - was left as just a possibility (and part of my question).
> 
> Under the pressure of time I have resorted to shutting down 
> the 6500s (one at a time), then bringing them up - and the 
> whole problem just vanished!
> 
> So - to the point - has anybody seen this type of flakiness 
> in the implementation - itself - of HSRP for Cisco, or has 
> anybody seen an actual attack - as described here: 
> http://www.securiteam.com/exploits/5CP051F4AK.html
>  - which would just go away upon 6500s reset (because of the 
> temporary nature of the original stimulus).
> 
> Obviously - both options worry me - but for two different 
> reasons. I have left - for now - some probes (sniffers) 
> running, and I plan digging further in any logs I may find, a 
> little later on ...
> 
> TIA,
> Stef
> _______________________________________________
> Intrusions mailing list
> [email protected] 
> http://www.dshield.org/mailman/listinfo/intrusions
> 

_______________________________________________
Intrusions mailing list
[email protected]
http://www.dshield.org/mailman/listinfo/intrusions