[TOOL] GenIP - Generate Lists of IP Addresses

The following security advisory is sent to the securiteam mailing list, and can be found at the SecuriTeam web site: http://www.securiteam.com
- - promotion

The SecuriTeam alerts list - Free, Accurate, Independent.

Get your security news from a reliable source.
http://www.securiteam.com/mailinglist.html 

- - - - - - - - -



  GenIP - Generate Lists of IP Addresses
------------------------------------------------------------------------


SUMMARY



DETAILS

genip has two modes of operation that are detailed below:

NMap Mode (Default):
In this mode genip will expand all target specifications listed on the 
command line. Since genip is essentially just the NMap target parsing code 
it functions in exactly the same way. Here is what the NMap documentation 
has to say about target specification:

Everything that isn't an option (or option argument) is treated as a 
target host specification. The simplest case is listing single hostnames 
or IP addresses on the command line. If you want to scan a subnet of IP 
addresses, you can append /mask to the hostname or IP address. mask must 
be between 0 (scan the whole Internet) and 32 (scan the single host 
specified). Use /24 to scan a class "C" address and /16 for a class "B". 
There is also a more powerful notation which lets you specify an IP 
address using lists/ranges for each element. Thus you can scan the whole 
class "B" network 192.168.*.* by specifying "192.168.*.*" or 
"192.168.0-255.0-255" or even "192.168.1-50,51-255.1,2,3,4,5-255". And of 
course you can use the mask notation: "192.168.0.0/16". These are all 
equivalent. If you use asterisks ("*"), remember that most shells require 
you to escape them with back slashes or protect them with quotes.

Range Mode:
In this mode two (and only two!) IP addresses must be specified, in dotted 
quad notation, and the output is all the addresses between the two 
(inclusive). This mode can be used to cross class boundaries.

To download the tool:  <http://www.bindshell.net/tools/genip/genip.tgz> 
http://www.bindshell.net/tools/genip/genip.tgz


ADDITIONAL INFORMATION

The information has been provided by  <mailto:mailto:[email protected]> 
Dave Armstrong.
To keep updated with the tool visit the project's homepage at:  
<http://www.bindshell.net/tools/genip> 
http://www.bindshell.net/tools/genip



======================================== 


This bulletin is sent to members of the SecuriTeam mailing list. 
To unsubscribe from the list, send mail with an empty subject line and body to: [email protected] 
In order to subscribe to the mailing list, simply forward this email to: [email protected] 


==================== 
==================== 

DISCLAIMER: 
The information in this bulletin is provided "AS IS" without warranty of any kind. 
In no event shall we be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages.