Re: Documentation tweaks.

>  There is no file 'INSTALL.md'.  The file is 'INSTALL.autotools.md'.

Whoops!  Yes the INSTALL.md file was moved.  Will update it.

-Micah

-----Original Message-----
From: clamav-devel <[email protected]> On Behalf Of G.W. Haywood
Sent: Thursday, September 3, 2020 3:10 AM
To: [email protected]
Subject: [Clamav-devel] Documentation tweaks.

Hi there,

[1]

The following appears at http://www.clamav.net/downloads .

[quote]
Virus Database

For ClamAV to work properly, both the ClamAV engine and the ClamAV Virus Database (CVD) must be kept up to date.

Freshclam should perform these updates automatically. Instructions for setting up Freshclam can be found in the documentation section.  If your network is segmented or the end hosts are unable to reach the Internet, you should investigate setting up a private local mirror. If this is not viable, you may use these direct download links: [snip] [/quote]

This seems to me to be rather misleading in that it seems to say that freshclam should automatically update the ClamAV engine.  It does not do that (and in my view it could be dangerous for it to attempt to do such a thing).

Perhaps the section could be reworded, something like:

"Each time it wakes up, freshclam first checks that the ClamAV engine is up to date, and issues a warning if it is not.  Whether the engine is up to date or not it will then automatically update the database.
Instructions for setting up Freshclam can be found in the ..."

[2]

In the 0.103.0-rc2 tarball, README.md says

[quote]
#### Build from Source on Linux/Unix/Mac

For basic compile and install instructions on Linux/Unix platforms, check out the [install instructions](INSTALL.md).
[/quote]

There is no file 'INSTALL.md'.  The file is 'INSTALL.autotools.md'.

--

73,
Ged.
_______________________________________________

clamav-devel mailing list
[email protected]
https://lists.clamav.net/mailman/listinfo/clamav-devel

Please submit your patches to our Github: https://github.com/Cisco-Talos/clamav-devel/pulls

Help us build a comprehensive ClamAV guide:
https://github.com/vrtadmin/clamav-faq

http://www.clamav.net/contact.html#ml
_______________________________________________

clamav-devel mailing list
[email protected]
https://lists.clamav.net/mailman/listinfo/clamav-devel

Please submit your patches to our Github: https://github.com/Cisco-Talos/clamav-devel/pulls

Help us build a comprehensive ClamAV guide:
https://github.com/vrtadmin/clamav-faq

http://www.clamav.net/contact.html#ml