RE: Netscreen to Cisco client/server VPN?
"Andrew Prince" <[email protected]>
| Newsgroups | gmane.comp.security.vpn |
|---|---|
| Organization | Trinity Security Services |
| Message-ID | <000901c3afbd$bc7c7a60$0201a8c0@DEIMOS> |
Jim, As I have also experienced - you probably won't find a client that will work with other vendors, despite of the standards. I would think you are better off at this stage of creating a local IPSEC policy for the user - I tested this using L2TP. Then use this policy as a "generic, connect to all" HTH Andy. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Jim Dueltgen Sent: 20 November 2003 21:16 To: [email protected] Subject: [VPN] Netscreen to Cisco client/server VPN? Hi folks, I'm currently slogging through the archives but I'm hoping someone has a quick answer for me. I've got a road warrior type user who needs to connect (not simultaneously) from a Win2K laptop to both a Cisco (3000 I believe) and NetScreen (5XP running the 4.x firmware) VPN server. He currently has the Cisco VPN client installed. Since the Cisco VPN Dialer and NetScreen Remote clients don't seem to play nicely with each other when they're both installed I'm wondering if anyone has had any success using either client (Cisco or NetScreen Remote) to connect to both server types and if so if you have a recipe or config examples to share. I see lots of interoperability testing for VPN server-to-server connections but I'm not finding any relevant information about client-to-server interoperability. Any help, including, "It can't be done, you bonehead," would be appreciated. Regards, Jim Dueltgen LMi.net _______________________________________________ VPN mailing list [email protected] http://lists.shmoo.com/mailman/listinfo/vpn