Re: Contivity 2700 to PIX 515 config.

it is probably a little bit low on information to provide any possible
help

J.

On Thu, Dec 04, 2003 at 11:19:23AM -0500, Little, Mike (BHS) wrote:
> All,
> 
>  
> 
> I'll keep this brief.  I have a Nortel Contivity 2700 that I'm setting up a
> site-to-site with a PIX 515.  It's a pretty straight setup - no NAT, etc.  I
> can initiate the tunnel fine from my end, but can't ping anything in their
> network.  They are not able to bring up the tunnel from the PIX side.  With
> the tunnel up, I'm seeing packets leaving my Contivity and, judging by what
> I've seen in their log files, see them arriving on their side.
> 
>  
> 
> I'm very familiar with the Contivity configs but much less familiar with the
> PIX.  I think it's their problem but don't know what to suggest or look for.
> 
>  
> 
> If someone has any suggestions, or can point me to some configuration
> information for these devices, it would be very much appreciated.
> 
>  
> 
>  
> 
> As always, thanks for the help,
> 
>  
> 
> Mike Little
> 
> Network Services
> 
> Baptist Healthcare System
> 
>  
> 
>  
> 

> _______________________________________________
> VPN mailing list
> [email protected]
> http://lists.shmoo.com/mailman/listinfo/vpn

-- 

-> Jean-Francois Dive
--> [email protected]

  I think that God in creating Man somewhat overestimated his ability.
  -- Oscar Wilde