Re: Cisco PIX 501 and Cisco remote VPN client
"Dana J. Dawson" <[email protected]>
| Newsgroups | gmane.comp.security.vpn |
|---|---|
| Organization | Qwest Communications |
| Message-ID | <[email protected]> |
Have you re-entered the group name as well? Either one being wrong will cause problems. Also, be careful of "copy and paste", since it sometimes adds spaces at the end of the pasted text. This won't be an issue in the PIX config, since any spaces after the group passwords are viewed as keyword separators, but if you're pasting the password into the client, that could be a problem. I can't speak for the list, but if you want to email the config to me I'll take a peek at it. HTH Dana -- Dana J. Dawson [email protected] Sr. Staff Engineer CCIE #1937 Qwest Communications (612) 664-3364 600 Stinson Blvd., Suite 1S (612) 664-4778 (FAX) Minneapolis MN 55413-2620 "Hard is where the money is." rob "i" wrote: > I've read through hard-to-read Cisco docs for hours, I've messed with > the config for hours, and I've searched the Internet for answers, but > I've found nothing to help me. > > I used the PDM to set up the config, and I set up a laptop on the > outside interface to test the connection. I can ping the external > interface, but the VPN connection fails. > > The error I am getting seems to indicate the group password is wrong, > but I rentered it twice. > > Could I post the PIX config here to get some help? > > Thanks. > > -- Rob -- > > >------------------------------------------------------------------------ > >_______________________________________________ >VPN mailing list >[email protected] >http://lists.shmoo.com/mailman/listinfo/vpn >