RE: "Routing Table Can't be Altered"
"Bill Yazji" <[email protected]>
| Newsgroups | gmane.comp.security.vpn |
|---|---|
| Message-ID | <!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAARbDiEbofO06HG0E0ia7uhsKAAAAQAAAAqDytMaip/[email protected]> |
Users can get this if they get a new IP address from a Linksys-type router, or if the router uses PPPoE and disconnects. Also - if the machine has 2 NICs in it - and one gets a new IP after the VPN client is up - this will also cause the error. It isn't really a bug - but more of a security feature. If the TCP/IP stack is altered, the tunnel drops. It's a good thing :) _____ From: [email protected] [mailto:[email protected]] On Behalf Of sunil Shetty Sent: Tuesday, February 17, 2004 5:50 AM To: [email protected] Subject: [VPN] "Routing Table Can't be Altered" Hi All, Contivity VPN Clients get the message "Routing Table Can't be Altered" and get disconnected. We have analyzed the problem and found the reason to be Routing table changes from Tech-Tip (Nortel Documentation). We tried MTU Fix (reduce MTU to lower value)-- It worked for some users, we tried DYNAMIC DNS DISABLING -- this also worked for some users likewise we also tried ICMP redirect and RIP/OSPF Routing table updates, Internet Connection sharing. In order to get rid of these problems we have suggestd users to install Contivity client - V 4.65_32. Still the users are getting this problem. Any help on this will be Highly Appreciated. Thanks in Advance. Swamy Patil <http://clients.rediff.com/signature/track_sig.asp> _______________________________________________ VPN mailing list [email protected] http://lists.shmoo.com/mailman/listinfo/vpn