erosqnative: add HW4 BT pins

commit b5597a1c38f3f54d7809aebc23b5a25d60f071f8
Author: Skye <[email protected]>
Date:   Mon May 18 17:57:30 2026 +0900

    erosqnative: add HW4 BT pins
    
    Change-Id: I2569f4db70261b454a1e1444ec529f8e714adc80

diff --git a/firmware/target/mips/ingenic_x1000/erosqnative/gpio-target.h b/firmware/target/mips/ingenic_x1000/erosqnative/gpio-target.h
index 53b17c2098..428a659f30 100644
--- a/firmware/target/mips/ingenic_x1000/erosqnative/gpio-target.h
+++ b/firmware/target/mips/ingenic_x1000/erosqnative/gpio-target.h
@@ -106,6 +106,18 @@ DEFINE_GPIO(BTN_SCROLL_B,       GPIO_PB(23),    GPIOF_INPUT)
 // GPIO 86 --> Port C, Pin 22
 DEFINE_GPIO(BT_PWR,             GPIO_PC(22),    GPIOF_OUTPUT(0))
 
+/* uart0_rxd */
+DEFINE_GPIO(BT_HCI_RXD,       GPIO_PC(10),    GPIOF_DEVICE(0b00))
+
+/* uart0_txd */
+DEFINE_GPIO(BT_HCI_TXD,       GPIO_PC(11),    GPIOF_DEVICE(0b00))
+
+/* uart0_cts */
+DEFINE_GPIO(BT_HCI_CTS,       GPIO_PC(12),    GPIOF_DEVICE(0b00))
+
+/* uart0_rts */
+DEFINE_GPIO(BT_HCI_RTS,       GPIO_PC(13),    GPIOF_DEVICE(0b00))
+
 
 
 
@@ -157,6 +169,10 @@ DEFINE_GPIO(BT_WAKE_HOST,       GPIO_PC(20),    GPIOF_INPUT)
 // gpio 83 --> port C, pin 19
 DEFINE_GPIO(HOST_WAKE_BT,       GPIO_PC(19),    GPIOF_OUTPUT(0))
 
+/* bt_reg_on */
+// gpio 82 --> port C, pin 18
+DEFINE_GPIO(BT_REG_ON_HW4,       GPIO_PC(18),    GPIOF_OUTPUT(0))
+
 /**************/
 /* USB        */
 /**************/
-- 
rockbox-cvs mailing list
[email protected]
https://lists.haxx.se/mailman/listinfo/rockbox-cvs