Re: JBA/GEAC/Infor Menu problem responses

Hi J......

Just done this,

 XA100                   Administration Functions                
   Maintain User Profiles                                                       
    User Profile                                                     Action     
    STEVER     Steve Raby                                            *Update    
                                                                                
   Type changes, press Enter and then F3 to Update                              
    User level. . . . . . . . . . . 3 (1=Novice,3=Expert,8=Nov Grp,9=Exp Grp)   
                                                                                
    Default sign-on company . . . . VD                                          
                                                                                
    Default development application                                             
    Language code . . . . . . . . .                                             
    Default job queue / library . . QBATCH      /  QGPL                         
    Default print queue / library . QPRINT      /  QGPL                         
    Hold on print queue . . . . . . 1       (1=Yes,0=No)                        
    Authorised to common functions  1       (1=Yes,0=No)                        
    Sign-off on leaving system. . . 0       (1=Yes,0=No)                        
    Date format (D/M/Y) . . . . . . D                                           
    Allow submit job prompt . . . . 1       (1=Yes,0=No)                        
    Allow command entry . . . . . . 1       (1=Yes,0=No)                        
    Message delivery. . . . . . . . *USER   (*NOTIFY,*BREAK,*HOLD,*DFT,*USER)   
                                                                                
    F3=Exit   F4=Browse   F12=Previous                     F24=More Keys        
                                                                                

I checked in IPGCFF4/APG05PHY and there was no record for me in there, I copied QPGMR which had the '1' in the last 10 positions but this achieved nothing. I still cannot do the authorisations. I know I have setup users before on this box, but that was at least 2 years ago. Something must have changed, the only people who could have changed it are Infor, but they need me to book a call before anyone will even talk to me about this, very frustrating.
 
 
 
 


________________________________

From: jklipa <jklipa-/[email protected]>
To: druss921-/[email protected]
Sent: Tue, 9 March, 2010 22:45:27
Subject: Re: [SYSTEM21] JBA/GEAC/Infor Menu problem responses

Steve,

Do you have authority to perform Common Functions...?
If not you will not likely see the authority screens...

Look at the record in IPGCFF4/APG05PHY that has your name on it...
The last ten positions of this record should be all '1' if you want to be able to do Common Functions which includes granting and revoking authority...

Typically the QSECOFR or QPGMR profile have the requisite clearance to perform CF...

Good luck...



________________________________

From: steve raby <druss921-/[email protected]>
To: System 21 Users <system21-Zwy7GipZuJhWk0Htik3J/[email protected]>
Sent: Tue, March 9, 2010 4:06:23 PM
Subject: Re: [SYSTEM21] JBA/GEAC/Infor Menu problem responses

Hi Adrian,
 
I take F8 from the actual screen layout to the screen where you enter 

ID/Env/Rl/Code, from there Enter does nothing, F8 just takes you out. Is it the release level perhaps?
 
Steve





--- On Tue, 9/3/10, Bailey, Adrian <Adrian.Bailey-ZW1nV1r7T6dWk0Htik3J/[email protected]> wrote:


From: Bailey, Adrian <Adrian.Bailey-ZW1nV1r7T6dWk0Htik3J/[email protected]>
Subject: Re: [SYSTEM21] JBA/GEAC/Infor Menu problem responses
To: "System 21 Users" <system21-Zwy7GipZuJhWk0Htik3J/[email protected]>
Date: Tuesday, 9 March, 2010, 20:40


Steve, You could try maintaining the menu again.  Press F8 from the memu
design screen (operations screen) then press enter (not F8).  The next
screen will allow you to use option 1 for all (options) or 3 to select
against each user name to be authorised.

Adrian Bailey

Telephone: +44 (0) 1329 224217   
Mobile:        +44 (0) 7736 120341
Fax:            +44 (0) 1329 224389


-----Original Message-----
From: system21-bounces-Zwy7GipZuJhWk0Htik3J/[email protected]
[mailto:system21-bounces-Zwy7GipZuJhWk0Htik3J/[email protected]] On Behalf Of steve raby
Sent: 09 March 2010 20:20
To: SYSTEM21-Zwy7GipZuJhWk0Htik3J/[email protected]
Subject: [SYSTEM21] JBA/GEAC/Infor Menu problem responses

Thank you for your replies you great people, I have tried that but F17
has been disabled, for some reason, is there someway to enable that
again? 


      
_______________________________________________
This is the System 21 Users (SYSTEM21) mailing list
To post a message email: SYSTEM21-Zwy7GipZuJhWk0Htik3J/[email protected]
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/system21
or email: SYSTEM21-request-Zwy7GipZuJhWk0Htik3J/[email protected]
Before posting, please take a moment to review the archives
at http://archive.midrange.com/system21.