Re: JBA/GEAC/Infor Menu problem responses
steve raby <druss921-/[email protected]>
| Newsgroups | gmane.comp.systems.as400.jbausers |
|---|---|
| Message-ID | <[email protected]> |
Hey Gary, Long time no mails. :-) Yes they do use Aurora, I have no idea what version it is, I don't know where to find that. I do not believe the client has documentation, its a Dutch company, the AS400 is crammed into a small room with lots of wires, servers and a couple of printers. I spoke to Infor but they were insistant that I raise a ticket and they would then look at this instead of me, the way things are going I may have to advise the client to do this anyway. I'm actually sat in my house doing this remotely for them, I normally just check that everything is working before they come in on a morning, occasionally they have other stuff for me to do, like this. I also used to know quite a bit about system manager, but as I said in an earlier mail I had a medical problem last year and a lot of it has gone, I am finding things come back as I go in to do stuff, but not, unfortunately, this stuff. LOL Regards Steve ________________________________ From: Gary Lewis <[email protected]> To: System 21 Users <system21-Zwy7GipZuJhWk0Htik3J/[email protected]> Sent: Wed, 10 March, 2010 15:17:26 Subject: Re: [SYSTEM21] JBA/GEAC/Infor Menu problem responses Hi Steve, How are you doing? Are you using Aurora? We are on 3.5.2 but I do have Aurora loaded for evaluation. I do not have any documentation and as yet have only created one user. Do you have any documentation? Can't you call Infor support? I will help if I can, I used to know a bit about system manager! Regards Gary. -----Original Message----- From: system21-bounces-Zwy7GipZuJhWk0Htik3J/[email protected] [mailto:system21-bounces-Zwy7GipZuJhWk0Htik3J/[email protected]] On Behalf Of steve raby Sent: 10 March 2010 14:03 To: System 21 Users Subject: Re: [SYSTEM21] JBA/GEAC/Infor Menu problem responses Hi Mike, I have looked at the roles and made changes to one of the users profiles and to roles and menu. The user profile in the S21 screens looks like mine, I can access the option, but when I sign on as the user I cannot. So I am not sure what is wrong. Steve ________________________________ From: Mike Hill <[email protected]> To: system21-Zwy7GipZuJhWk0Htik3J/[email protected] Sent: Wed, 10 March, 2010 14:12:54 Subject: Re: [SYSTEM21] JBA/GEAC/Infor Menu problem responses Let me know if you are sucessfull > Date: Wed, 10 Mar 2010 13:03:25 +0000 > From: druss921-/[email protected] > To: system21-Zwy7GipZuJhWk0Htik3J/[email protected] > Subject: Re: [SYSTEM21] JBA/GEAC/Infor Menu problem responses > > Mike, > > Is that so? Yes they use Aurora so I shall check roll's. Thank you. > > Steve > > > > > ________________________________ > From: Mike Hill <[email protected]> > To: system21-Zwy7GipZuJhWk0Htik3J/[email protected] > Sent: Wed, 10 March, 2010 14:00:27 > Subject: Re: [SYSTEM21] JBA/GEAC/Infor Menu problem responses > > > Steve, > If you are using System21 Aurora then Roll processing may be active. If that is the case then the authorisation is at a roll level not a user level. > Mike > > Date: Wed, 10 Mar 2010 04:57:05 -0800 > > From: druss921-/[email protected] > > To: SYSTEM21-Zwy7GipZuJhWk0Htik3J/[email protected] > > Subject: Re: [SYSTEM21] JBA/GEAC/Infor Menu problem responses > > > > Hi J...... > > > > Just done this, > > > >á XA100á á á á á á á á á Administration Functionsá á á á á á á á > >á á Maintain User Profilesá á á á á á á á á á á á á á á á á á á á á á á á á á á > >á á User Profileá á á á á á á á á á á á á á á á á á á á á á á á á á Actioná á > >á á STEVERá á Steve Rabyá á á á á á á á á á á á á á á á á á á á á á *Updateá á > >á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á > >á á Type changes, press Enter and then F3 to Updateá á á á á á á á á á á á á á á > >á á User level. . . . . . . . . . . 3 (1=Novice,3=Expert,8=Nov Grp,9=Exp Grp)á > >á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á > >á á Default sign-on company . . . . VDá á á á á á á á á á á á á á á á á á á á á > >á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á > >á á Default development applicationá á á á á á á á á á á á á á á á á á á á á á > >á á Language code . . . . . . . . .á á á á á á á á á á á á á á á á á á á á á á > >á á Default job queue / library . . QBATCHá á á /á QGPLá á á á á á á á á á á á > >á á Default print queue / library . QPRINTá á á /á QGPLá á á á á á á á á á á á > >á á Hold on print queue . . . . . . 1á á á (1=Yes,0=No)á á á á á á á á á á á á > >á á Authorised to common functionsá 1á á á (1=Yes,0=No)á á á á á á á á á á á á > >á á Sign-off on leaving system. . . 0á á á (1=Yes,0=No)á á á á á á á á á á á á > >á á Date format (D/M/Y) . . . . . . Dá á á á á á á á á á á á á á á á á á á á á > >á á Allow submit job prompt . . . . 1á á á (1=Yes,0=No)á á á á á á á á á á á á > >á á Allow command entry . . . . . . 1á á á (1=Yes,0=No)á á á á á á á á á á á á > >á á Message delivery. . . . . . . . *USERá (*NOTIFY,*BREAK,*HOLD,*DFT,*USER)á > >á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á > >á á F3=Exitá F4=Browseá F12=Previousá á á á á á á á á á F24=More Keysá á á á > >á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á > > > > I checked in IPGCFF4/APG05PHY and there was no record for me in there, I copied QPGMR which had the '1' in the last 10 positions but this achieved nothing. I still cannot do the authorisations. I know I have setup users before on this box, but that was at least 2 years ago. Something must have changed, the only people who could have changed it are Infor, but they need me to book a call before anyone will even talk to me about this, very frustrating. > >á > >á > >á > >á > > > > > > ________________________________ > > > > From: jklipa <jklipa-/[email protected]> > > To: druss921-/[email protected] > > Sent: Tue, 9 March, 2010 22:45:27 > > Subject: Re: [SYSTEM21] JBA/GEAC/Infor Menu problem responses > > > > Steve, > > > > Do you have authority to perform Common Functions...? > > If not you will not likely see the authority screens... > > > > Look at the record in IPGCFF4/APG05PHY that has your name on it... > > The last ten positions of this record should be all '1' if you want to be able to do Common Functions which includes granting and revoking authority... > > > > Typically the QSECOFR or QPGMR profile have the requisite clearance to perform CF... > > > > Good luck... > > > > > > > > ________________________________ > > > > From: steve raby <druss921-/[email protected]> > > To: System 21 Users <system21-Zwy7GipZuJhWk0Htik3J/[email protected]> > > Sent: Tue, March 9, 2010 4:06:23 PM > > Subject: Re: [SYSTEM21] JBA/GEAC/Infor Menu problem responses > > > > Hi Adrian, > >á > > I take F8 from the actual screen layout to the screen where you enter > > > > ID/Env/Rl/Code, from there Enter does nothing, F8 just takes you out. Is it the release level perhaps? > >á > > Steve > > > > > > > > > > > > --- On Tue, 9/3/10, Bailey, Adrian <Adrian.Bailey-ZW1nV1r7T6dWk0Htik3J/[email protected]> wrote: > > > > > > From: Bailey, Adrian <Adrian.Bailey-ZW1nV1r7T6dWk0Htik3J/[email protected]> > > Subject: Re: [SYSTEM21] JBA/GEAC/Infor Menu problem responses > > To: "System 21 Users" <system21-Zwy7GipZuJhWk0Htik3J/[email protected]> > > Date: Tuesday, 9 March, 2010, 20:40 > > > > > > Steve, You could try maintaining the menu again.á Press F8 from the memu > > design screen (operations screen) then press enter (not F8).á The next > > screen will allow you to use option 1 for all (options) or 3 to select > > against each user name to be authorised. > > > > Adrian Bailey > > > > Telephone: +44 (0) 1329 224217á > > Mobile:á á á á +44 (0) 7736 120341 > > Fax:á á á á á á +44 (0) 1329 224389 > > > > > > -----Original Message----- > > From: system21-bounces-Zwy7GipZuJhWk0Htik3J/[email protected] > > [mailto:system21-bounces-Zwy7GipZuJhWk0Htik3J/[email protected]] On Behalf Of steve raby > > Sent: 09 March 2010 20:20 > > To: SYSTEM21-Zwy7GipZuJhWk0Htik3J/[email protected] > > Subject: [SYSTEM21] JBA/GEAC/Infor Menu problem responses > > > > Thank you for your replies you great people, I have tried that but F17 > > has been disabled, for some reason, is there someway to enable that > > again? > > > > > >á á á > > _______________________________________________ > > This is the System 21 Users (SYSTEM21) mailing list > > To post a message email: SYSTEM21-Zwy7GipZuJhWk0Htik3J/[email protected] > > To subscribe, unsubscribe, or change list options, > > visit: http://lists.midrange.com/mailman/listinfo/system21 > > or email: SYSTEM21-request-Zwy7GipZuJhWk0Htik3J/[email protected] > > Before posting, please take a moment to review the archives > > at http://archive.midrange.com/system21. > > > ááá ááá ááá á ááá ááá á > _______________________________________________ > This is the System 21 Users (SYSTEM21) mailing list > To post a message email: SYSTEM21-Zwy7GipZuJhWk0Htik3J/[email protected] > To subscribe, unsubscribe, or change list options, > visit: http://lists.midrange.com/mailman/listinfo/system21 > or email: SYSTEM21-request-Zwy7GipZuJhWk0Htik3J/[email protected] > Before posting, please take a moment to review the archives > at http://archive.midrange.com/system21. > > > > _______________________________________________ > This is the System 21 Users (SYSTEM21) mailing list > To post a message email: SYSTEM21-Zwy7GipZuJhWk0Htik3J/[email protected] > To subscribe, unsubscribe, or change list options, > visit: http://lists.midrange.com/mailman/listinfo/system21 > or email: SYSTEM21-request-Zwy7GipZuJhWk0Htik3J/[email protected] > Before posting, please take a moment to review the archives > at http://archive.midrange.com/system21. > _______________________________________________ This is the System 21 Users (SYSTEM21) mailing list To post a message email: SYSTEM21-Zwy7GipZuJhWk0Htik3J/[email protected] To subscribe, unsubscribe, or change list options, visit: http://lists.midrange.com/mailman/listinfo/system21 or email: SYSTEM21-request-Zwy7GipZuJhWk0Htik3J/[email protected] Before posting, please take a moment to review the archives at http://archive.midrange.com/system21. _______________________________________________ This is the System 21 Users (SYSTEM21) mailing list To post a message email: SYSTEM21-Zwy7GipZuJhWk0Htik3J/[email protected] To subscribe, unsubscribe, or change list options, visit: http://lists.midrange.com/mailman/listinfo/system21 or email: SYSTEM21-request-Zwy7GipZuJhWk0Htik3J/[email protected] Before posting, please take a moment to review the archives at http://archive.midrange.com/system21. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ This e-mail and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this e-mail in error please notify the originator of the message. The views and opinions specified in this email may well be those of an individual and not truely reflect the opinion of Showerlux UK Ltd. as a whole. All possible care has been taken to ensure our network and email service remains virus free. We can not however accept liability for any virus transmitted to you from a Showerlux user. We urge you to scan any emails with your own virus software for your own peace of mind. This message has been scanned by MailController by computerworld business solutions - www.cbs.cc _______________________________________________ This is the System 21 Users (SYSTEM21) mailing list To post a message email: SYSTEM21-Zwy7GipZuJhWk0Htik3J/[email protected] To subscribe, unsubscribe, or change list options, visit: http://lists.midrange.com/mailman/listinfo/system21 or email: SYSTEM21-request-Zwy7GipZuJhWk0Htik3J/[email protected] Before posting, please take a moment to review the archives at http://archive.midrange.com/system21. _______________________________________________ This is the System 21 Users (SYSTEM21) mailing list To post a message email: SYSTEM21-Zwy7GipZuJhWk0Htik3J/[email protected] To subscribe, unsubscribe, or change list options, visit: http://lists.midrange.com/mailman/listinfo/system21 or email: SYSTEM21-request-Zwy7GipZuJhWk0Htik3J/[email protected] Before posting, please take a moment to review the archives at http://archive.midrange.com/system21.