Re: Work Order / Batch Closeout Question

Todd,

 

Do you have the PMC module and access to the TRDATA file, or are you loading an Inventory batch ?

 

If you do have the PMC module you might want to consider writing the RM to TRDATA for PMC to process.

 

Good Luck, 

 

Jeff Snyder, CPIM, CSCP

Guide Technologies, LLC


 
> To: mapics-l-Zwy7GipZuJhWk0Htik3J/[email protected]
> From: [email protected]
> Date: Wed, 21 Oct 2009 20:10:08 +0000
> Subject: Re: [MAPICS-L] Work Order / Batch Closeout Question
> 
> Check to ensure that the unattached jobs are running. Also, if the status of the transactions are "U", either the unattached jobs are not running, or there is an error causing the posting to be on hold.
> Sent from my Verizon Wireless BlackBerry
> 
> -----Original Message-----
> From: "Todd Ivy" <[email protected]>
> Date: Wed, 21 Oct 2009 14:59:45 
> To: MAPICS ERP System Discussion<mapics-l-Zwy7GipZuJhWk0Htik3J/[email protected]>
> Subject: Re: [MAPICS-L] Work Order / Batch Closeout Question
> 
> No errors. Thanks
> 
> Todd Ivy
> 
> TYMCO, Inc.
> 225 E. Industrial Blvd
> Waco, Tx 76705
> 
> T:(254) 799-5546 Ext:389
> F:(254) 799-2722
> 
> www.tymco.com <http://www.tymco.com>
> 
> 
> 
> 
> 
> 
> -----Original Message-----
> From: mapics-l-bounces-Zwy7GipZuJhWk0Htik3J/[email protected]
> [mailto:mapics-l-bounces-Zwy7GipZuJhWk0Htik3J/[email protected]]On Behalf Of Kevin D Fox
> Sent: Wednesday, October 21, 2009 2:47 PM
> To: MAPICS ERP System Discussion
> Subject: Re: [MAPICS-L] Work Order / Batch Closeout Question
> 
> 
> Yes...there are errors in your transactions. You need to correct the errors
> Sent from my Verizon Wireless BlackBerry
> 
> -----Original Message-----
> From: "Todd Ivy" <[email protected]>
> Date: Wed, 21 Oct 2009 10:22:00
> To: MAPICS ERP System Discussion<mapics-l-Zwy7GipZuJhWk0Htik3J/[email protected]>
> Subject: [MAPICS-L] Work Order / Batch Closeout Question
> 
> Hello all,
> 
> We have implemented a wireless scanner barcoding system for inventory
> purposes. We have got it running smoothly for the most part, but have an
> issue that I cannot resolve. Hopefully someone else has had this issue or
> may know what could cause it.
> 
> The problem we are having is when we try to create an RM transaction on our
> wireless scanners. There is a scenario when MAPICS goes to a certain
> screen, and the scanner doesn't recognize the screen, b/c we have not told
> the scanner what to do when it sees it. (Mainly b/c we don't know what
> causes the screen to appear and never saw it while manually creating RM
> transactions.) After MAPICS processes the RM transation, it wants to close
> the batch. This is of course normal. Up to here we are fine. As it comes
> to the screen that typically gives you the option to F23 to Supspend the
> Batch, or F24 to Close the Batch, it knows to close the batch and run the
> register. Every once in a while, when we get to this screen, it only gives
> the option to F23 Suspend, and doesn't give the F24 to Close option. Here,
> the scanner doesn't know what to do and "freezes". This only happens a few
> times a week, so I know our programming is correct for the most part, b/c it
> works the rest of the time.
> 
> My question is does anybody know why we are getting the screen that doesn't
> allow us to F24 Close Batch. There were no errors in the batches in
> question. There are no other types of transactions, only RM (Manufacturing
> Receipts).
> 
> Any help would be greatly appreciated. Thanks so much.
> 
> Todd Ivy
> 
> TYMCO, Inc.
> 225 E. Industrial Blvd
> Waco, Tx 76705
> 
> T:(254) 799-5546 Ext:389
> F:(254) 799-2722
> 
> www.tymco.com <http://www.tymco.com>
> 
> 
> 
> 
> 
> 
> _______________________________________________
> This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
> To post a message email: MAPICS-L-Zwy7GipZuJhWk0Htik3J/[email protected]
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/mapics-l
> or email: MAPICS-L-request-Zwy7GipZuJhWk0Htik3J/[email protected]
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/mapics-l.
> 
> _______________________________________________
> This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
> To post a message email: MAPICS-L-Zwy7GipZuJhWk0Htik3J/[email protected]
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/mapics-l
> or email: MAPICS-L-request-Zwy7GipZuJhWk0Htik3J/[email protected]
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/mapics-l.
> 
> 
> 
> _______________________________________________
> This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
> To post a message email: MAPICS-L-Zwy7GipZuJhWk0Htik3J/[email protected]
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/mapics-l
> or email: MAPICS-L-request-Zwy7GipZuJhWk0Htik3J/[email protected]
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/mapics-l.
> 
> _______________________________________________
> This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
> To post a message email: MAPICS-L-Zwy7GipZuJhWk0Htik3J/[email protected]
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/mapics-l
> or email: MAPICS-L-request-Zwy7GipZuJhWk0Htik3J/[email protected]
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/mapics-l.
> 
 		 	   		  
_______________________________________________
This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
To post a message email: MAPICS-L-Zwy7GipZuJhWk0Htik3J/[email protected]
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/mapics-l
or email: MAPICS-L-request-Zwy7GipZuJhWk0Htik3J/[email protected]
Before posting, please take a moment to review the archives
at http://archive.midrange.com/mapics-l.