Re: Costing Simulation

Absolutely Right!  The accountants I work with love this new feature.

-----Original Message-----
From: mapics-l-bounces-Zwy7GipZuJhWk0Htik3J/[email protected] [mailto:mapics-l-bounces-Zwy7GipZuJhWk0Htik3J/[email protected]]
On Behalf Of Jeff Snyder
Sent: Wednesday, October 28, 2009 9:28 AM
To: mapics midrange
Subject: Re: [MAPICS-L] Costing Simulation


FYI- 

 

EPDM @ rel 7.7 and higher is much more robust in the area of cost
simulation.

 

One of the many benefits.   All online views of results, percents, etc.

 

Of course these can be dropped into a spread sheet then for further
analysis.

 

Jeff Snyder, CPIM, CSCP

Guide Technologies, LLC


 
> From: [email protected]
> To: mapics-l-Zwy7GipZuJhWk0Htik3J/[email protected]
> Date: Wed, 28 Oct 2009 09:22:09 -0700
> Subject: Re: [MAPICS-L] Costing Simulation
> 
> Jeff
> 
> Yes, you can do cost roll simulations in PDM. If you have upgraded and
> activated EPDM, you can do them there as well. The same function as in
PDM.
> 
> You can go to screen AMEJ70. You can then select from a list of changes
you
> want to test. See the manual for details but basically they are:
> 1. Simulate items that have had bom/routing or cost changes.
> 2. Simulate rate changes that have occurred in routings for machine rates,
> run labor rates, setup labor rates or overhead rates
> 3. Simulate changes at the material level by a percentage (i.e. simulate a
> material price increase of 3%)
> 4. Simulate changes using the system calculated average yield factor.
> 5. None, just simulate a cost roll. i.e. no changes to the system tables
> (files).
> 
> As far as I know, no data is written to tables. It is only printed output.
> If you want a file you would need to have a license to source and modify
the
> source, or if you have a print spool reading program such as jacana you
> could then create the tables.
> 
> Kevin
> 
> DATE **/**/** PRODUCT COST SIMULATION SELECT AMEJ70 **
> --BOTH CURRENT AND STANDARD--
> MAKE ONE OF THE FOLLOWING CHANGES PRIOR TO SIMULATION
> 1 - CHANGE BY ITEM
> MATERIAL THIS LEVEL
> 2 - CHANGE BY FACILITY
> MACHINE, RUN LABOR, SETUP LABOR, OR OVERHEAD
> 3 - CHANGE BY PERCENT
> MATERIAL THIS LEVEL - I/M
> MACHINE, RUN LABOR, SETUP LABOR, OR OVERHEAD - FAC
> 4 - USE AVERAGE YIELD
> 5 - NONE OF THE ABOVE
> ENTER SELECTION FOR SIMULATION n
> ENTER COSTING DATE nnnnnn
> SUPPRESS WARNING MESSAGES ON COSTING REPORT? (Y/N) A
> 
> -----Original Message-----
> From: mapics-l-bounces-Zwy7GipZuJhWk0Htik3J/[email protected] [mailto:mapics-l-bounces-Zwy7GipZuJhWk0Htik3J/[email protected]]
> On Behalf Of Jeff Williams
> Sent: Wednesday, October 28, 2009 7:09 AM
> To: MAPICS ERP System Discussion
> Subject: Re: [MAPICS-L] Costing Simulation
> 
> No. I have always been told there is a way to do costing simulations in
> Product Data Management? Just never had the need to do it until now.
Thanks 
> 
> Jeff Williams 
> 
> ----- Original Message ----- 
> From: "Otto Meyn" < meyno-KD3fYNZuIC/[email protected] > 
> To: "MAPICS ERP System Discussion" < mapics-l-Zwy7GipZuJhWk0Htik3J/[email protected] > 
> Sent: Wednesday, October 28, 2009 9:55 AM 
> Subject: Re: [MAPICS-L] Costing Simulation 
> 
> > Are your talking about Power Link 7.7 ? 
> > 
> > -----Original Message----- 
> > From: mapics-l-bounces-Zwy7GipZuJhWk0Htik3J/[email protected] 
> > [mailto:mapics-l-bounces-Zwy7GipZuJhWk0Htik3J/[email protected]] On Behalf Of Jeff Williams 
> > Sent: Wednesday, October 28, 2009 9:52 AM 
> > To: mapics-l 
> > Subject: [MAPICS-L] Costing Simulation 
> > 
> > Hi all. I have a need to start using the costing simulation in Mapics. 
> > We run pdm and IM. We have never used it and I was wondering if you 
> > could explain to me how it works? What I need to do is simulate a cost 
> > change of raw materials and see how it effects the costs of finished 
> > products. Where does Mapics store this information or is it only on 
> > reports? I also need to capture this information in a file. Any thoughts

> > or help is appreciated. Thanks! 
> > 
> > Jeff Williams 
> > _______________________________________________ 
> > This is the MAPICS ERP System Discussion (MAPICS-L) mailing list 
> > To post a message email: MAPICS-L-Zwy7GipZuJhWk0Htik3J/[email protected] 
> > To subscribe, unsubscribe, or change list options, 
> > visit: http://lists.midrange.com/mailman/listinfo/mapics-l 
> > or email: MAPICS-L-request-Zwy7GipZuJhWk0Htik3J/[email protected] 
> > Before posting, please take a moment to review the archives 
> > at http://archive.midrange.com/mapics-l . 
> > 
> > _______________________________________________ 
> > This is the MAPICS ERP System Discussion (MAPICS-L) mailing list 
> > To post a message email: MAPICS-L-Zwy7GipZuJhWk0Htik3J/[email protected] 
> > To subscribe, unsubscribe, or change list options, 
> > visit: http://lists.midrange.com/mailman/listinfo/mapics-l 
> > or email: MAPICS-L-request-Zwy7GipZuJhWk0Htik3J/[email protected] 
> > Before posting, please take a moment to review the archives 
> > at http://archive.midrange.com/mapics-l . 
> > 
> > 
> _______________________________________________
> This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
> To post a message email: MAPICS-L-Zwy7GipZuJhWk0Htik3J/[email protected]
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/mapics-l
> or email: MAPICS-L-request-Zwy7GipZuJhWk0Htik3J/[email protected]
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/mapics-l.
> 
> 
> _______________________________________________
> This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
> To post a message email: MAPICS-L-Zwy7GipZuJhWk0Htik3J/[email protected]
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/mapics-l
> or email: MAPICS-L-request-Zwy7GipZuJhWk0Htik3J/[email protected]
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/mapics-l.
> 
 		 	   		  
_______________________________________________
This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
To post a message email: MAPICS-L-Zwy7GipZuJhWk0Htik3J/[email protected]
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/mapics-l
or email: MAPICS-L-request-Zwy7GipZuJhWk0Htik3J/[email protected]
Before posting, please take a moment to review the archives
at http://archive.midrange.com/mapics-l.


_______________________________________________
This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
To post a message email: MAPICS-L-Zwy7GipZuJhWk0Htik3J/[email protected]
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/mapics-l
or email: MAPICS-L-request-Zwy7GipZuJhWk0Htik3J/[email protected]
Before posting, please take a moment to review the archives
at http://archive.midrange.com/mapics-l.