Re: Automation of RM's

I would add,  You may want to RM to a 'Line location', i.e. 'Floor' location associated with this W/C,  'controlled WH.'  Then have the material handler TW to either a Stock Loc (WH) or another point of use Line location using a 'hand held mobile device'.  Accurate and timely.  You also have the ability to back flush any components from an operation off (within MES) at the W/C assigned location.  You can Print a Stock Label as well at RM complete time. Bar code as much as possible to save time and increase accuracy.  The supervisor should be responsible for 'his line' inventory, and check cycle count regularly.  Any excess - Return to Stock (TW).  Be sure to paint the floor so we know if the component is in inventory or WIP (i.e. issued to the MO).  This feature in MES is quite a bit like 
 the REP Module. Hope this helps. Jeff

Jeffrey G Snyder CPIM, CSCP
Senior Mfg Consultant
Guide Technologies, LLC
cell 724 699 2506

 > From: [email protected]
> To: mapics-l-Zwy7GipZuJhWk0Htik3J/[email protected]
> Date: Wed, 8 Aug 2012 14:21:47 +0000
> Subject: Re: [MAPICS-L] Automation of RM's
> 
> Implement the MES application for use on the shop floor and have the operators start/stop work orders and enter qty complete and then RM's at the last operation.
> 
> Best Regards
> 
> Richard (Dick) Stover
> Consulting Manager 
> Guide Technologies, LLC
> A Gold Infor Channel Partner
> 215-499-8530
> [email protected]
> 2012 INFOR Manufacturing and XA User Conference; September 24-25  Grand Rapids, MI
> Download info at: http://www.guidetechnologies.com and select the link on the right
> 
> -----Original Message-----
> From: mapics-l-bounces-Zwy7GipZuJhWk0Htik3J/[email protected] [mailto:mapics-l-bounces-Zwy7GipZuJhWk0Htik3J/[email protected]] On Behalf Of Alan Kreutzer
> Sent: Tuesday, August 07, 2012 11:31 AM
> To: mapics-l-Zwy7GipZuJhWk0Htik3J/[email protected]
> Subject: [MAPICS-L] Automation of RM's
> 
> Someone has to of already solved this problem. We are on version XA 7.7, green screen and PowerLink.
> 
> We are manually keying all of our RM's at the end of the day after our packing department shift is complete. As things are complete we have a person writing down the items, and accumulating the paperwork during the day. After the shift is complete, all of the paperwork is accumulated and given to a person to manually enter the RM's.
> 
> How has anyone else created a more effecient process, to get the RM's entered in more real-time so that we don't have shipping inventory issues.
> 
> Any help would be greatly appreciated.
> 
> thanks,
> 
> Alan Kreutzer
> IT Manager
> Office:  719-598-5070, ext. 2456
> Cell: 719-466-0424
> alan.kreutzer-my/[email protected]
> 
> 
> _______________________________________________
> This is the MAPICS ERP System Discussion (MAPICS-L) mailing list To post a message email: MAPICS-L-Zwy7GipZuJhWk0Htik3J/[email protected] To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/mapics-l
> or email: MAPICS-L-request-Zwy7GipZuJhWk0Htik3J/[email protected]
> Before posting, please take a moment to review the archives at http://archive.midrange.com/mapics-l.
> 
> _______________________________________________
> This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
> To post a message email: MAPICS-L-Zwy7GipZuJhWk0Htik3J/[email protected]
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/mapics-l
> or email: MAPICS-L-request-Zwy7GipZuJhWk0Htik3J/[email protected]
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/mapics-l.
> 
 		 	   		  
_______________________________________________
This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
To post a message email: MAPICS-L-Zwy7GipZuJhWk0Htik3J/[email protected]
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/mapics-l
or email: MAPICS-L-request-Zwy7GipZuJhWk0Htik3J/[email protected]
Before posting, please take a moment to review the archives
at http://archive.midrange.com/mapics-l.