Re: Questions about an Old AS400 System

Borrow a 5250 terminal from work long enough to see if this beast works.
Or hit ebay for an emulation card or 5250 terminal.

There's a lot more traffic on the midrange-l list.  Someone there might 
have the driver for the dec5250 card.

Rob Berendt
-- 
Group Dekko Services, LLC
Dept 01.073
PO Box 2000
Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





Jonathan Carron <[email protected]> 
Sent by: security400-bounces-Zwy7GipZuJhWk0Htik3J/[email protected]
02/09/2005 01:35 PM
Please respond to
Security Administration on the AS400 / iSeries  <security400-Zwy7GipZuJhWk0Htik3J/[email protected]>


To
Security Administration on the AS400 / iSeries <security400-Zwy7GipZuJhWk0Htik3J/[email protected]>
cc

Subject
Re: [Security400] Questions about an Old AS400 System






thanks for the reply Rob,

I've got the box actually that breaks out of the 9 pin connector at
the back, which has the round connectors. from there I have a cable
which goes to a sort of T junction which connected back to a 15 port
female connector that plugs into the dec5250 card I don't have drivers
for . Their apparently on Perle's pages, but
they don't provide access to that to the public :(

Please let me know if anything else comes to mind....
Thanks! 

Jonathan


On Wed, 9 Feb 2005 08:55:12 -0500, [email protected] <[email protected]> wrote:
> This is more of a midrange-l kind of question.  There are some people
> there who probably have those card numbers memorized.  What I suspect is
> that you need a special cable.  This cable has a multi pin end that 
plugs
> into one of those cards.  At the other end of the cable is a box.  This
> box has from 2 to about a dozen twinax ports, depending on what model
> card, etc.
> 
> Rob Berendt
> --
> Group Dekko Services, LLC
> Dept 01.073
> PO Box 2000
> Dock 108
> 6928N 400E
> Kendallville, IN 46755
> http://www.dekko.com
> 
> Jonathan Carron <[email protected]>
> Sent by: security400-bounces-Zwy7GipZuJhWk0Htik3J/[email protected]
> 02/08/2005 11:34 PM
> Please respond to
> Security Administration on the AS400 / iSeries 
<security400-Zwy7GipZuJhWk0Htik3J/[email protected]>
> 
> To
> security400-Zwy7GipZuJhWk0Htik3J/[email protected]
> cc
> 
> Subject
> [Security400] Questions about an Old AS400 System
> 
> 
> Hey All,
> 
>  I hope Im asking the right place for this. Ive looked through the
> old forums with little or no luck. I've got an old F10 as-400 id like
> to play with, however, I do not have the software for the TwinAX
> connection nor the drivers for the dec5250 emu ? card (Ive tried the
> drivers for the cem5250 drivers blue screen the box), from perle's
> site.. no go. I can't get the proper ones because im not a <insert
> speical circumstancial name here to get drivers> person. :(
> 
> Anyways ive searched and searched for how to console into the box. Ive
> found a little bit of information.. but still nothing thats helpful.
> 
> There are a million ports on the back ... none of which seems to be 
serial
> ?
> On the rear for ports ive got,
> db25, male, #6152      (console maybee :D ?)
> #2609 -?
> 2x 9 pin females , 0-3 and 4-7, this is where the twinax console plugs 
in
> ?
> 
> bottom/back has a 15 pin female, and a 50? pin  male
> 
> Cards are installed, from 0-8 repectfully
> Slot 1 #2700
> #2 - 2615
> #3 - 2624
> #4 - 2623
> #5 - 6140
> #6 - 3120
> #7 - 3120
> #8 - 2587
> 
> in the back cabnet their are two black male db 25 connectors with the
> numbering,
> 59x3832
> ec843284
> tse
> 
> There is also a IPL7404 unit with many others. On the back seems to be
> a 9 pin connector, male. the front has a female 9 pin. Is this some
> sort of a console ?
> 
> I've got tape with the OS on it too.. as I understand it I'll get 60
> days to play before it has to be erased....
> 
> Can anyone help me out here as to how to get into this thing ?
> (console or other?)
> 
> Any help would be greatly appreciated.... And yes I realize this is a
> counter weight, but its still something im interested in looking into.
> _______________________________________________
> This is the Security Administration on the AS400 / iSeries (Security400)
> mailing list
> To post a message email: Security400-Zwy7GipZuJhWk0Htik3J/[email protected]
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/security400
> or email: Security400-request-Zwy7GipZuJhWk0Htik3J/[email protected]
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/security400.
> 
> _______________________________________________
> This is the Security Administration on the AS400 / iSeries (Security400) 
mailing list
> To post a message email: Security400-Zwy7GipZuJhWk0Htik3J/[email protected]
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/security400
> or email: Security400-request-Zwy7GipZuJhWk0Htik3J/[email protected]
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/security400.
> 
>
_______________________________________________
This is the Security Administration on the AS400 / iSeries (Security400) 
mailing list
To post a message email: Security400-Zwy7GipZuJhWk0Htik3J/[email protected]
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/security400
or email: Security400-request-Zwy7GipZuJhWk0Htik3J/[email protected]
Before posting, please take a moment to review the archives
at http://archive.midrange.com/security400.


_______________________________________________
This is the Security Administration on the AS400 / iSeries (Security400) mailing list
To post a message email: Security400-Zwy7GipZuJhWk0Htik3J/[email protected]
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/security400
or email: Security400-request-Zwy7GipZuJhWk0Htik3J/[email protected]
Before posting, please take a moment to review the archives
at http://archive.midrange.com/security400.