[GNU Autoconf 2.69] testsuite: 209 503

"Oppe, Thomas C ERDC-RDE-ITL-MS Contractor" <[email protected]>
Newsgroups gmane.comp.sysutils.autoconf.bugs
Message-ID <1B6259370D5EFF488340E9D87BD0580A01753B7D45@MS-EX2VKS.erdc.dren.mil> 
Dear Sir:

I saw two test failures in the "make check" phase when building autoconf
2.69 using GCC 6.3.0.  The test failures were:

209: parallel autotest and signal handling           FAILED
(autotest.at:1616)

503: autoscan                                        FAILED (autoscan.at:44)

****************************************
File: tests/testsuite.dir/209/testsuite.log
****************************************

#                             -*- compilation -*-
209. autotest.at:1511: testing parallel autotest and signal handling ...
./autotest.at:1513: mkfifo fifo || exit 77
./autotest.at:1513: ${CONFIG_SHELL-$SHELL} -c '(set -m && set +m) || exit
77'
stderr:
./autotest.at:1526: cat >./atconfig <<EOF
at_testdir=.
abs_builddir='`pwd`'
at_srcdir=.
abs_srcdir='`pwd`'
at_top_srcdir=.
abs_top_srcdir='`pwd`'
at_top_build_prefix=
abs_top_builddir='`pwd`'
EOF
./autotest.at:1526: autom4te --language=autotest -o micro-suite
micro-suite.at
./autotest.at:1556: $CONFIG_SHELL $abs_top_builddir/config.status
--file=Makefile:Makefile.in
stdout:
config.status: creating Makefile
./autotest.at:1565: $CONFIG_SHELL ./micro-suite
stderr:

micro-suite: WARNING: caught signal INT, bailing out
stdout:
## -------------------------------------------------------------- ##
## GNU Nonsense 1.0 test suite: suite to test parallel execution. ##
## -------------------------------------------------------------- ##
  1: test number 1                                   ok
  2: test number 2                                   ok
  3: test number 3                                   ok
  4: killer test                                    ./autotest.at:1568: grep
'bailing out' stderr
stdout:
micro-suite: WARNING: caught signal INT, bailing out
./autotest.at:1569: grep 'bailing out' micro-suite.log
stdout:
micro-suite:18: WARNING: caught signal INT, bailing out
./autotest.at:1571: grep '[iI]nterrupt[	 ]' stderr
./autotest.at:1574: $CONFIG_SHELL ./micro-suite --jobs=3
stderr:
micro-suite: WARNING: caught signal INT, bailing out
stdout:
## -------------------------------------------------------------- ##
## GNU Nonsense 1.0 test suite: suite to test parallel execution. ##
## -------------------------------------------------------------- ##

  3: test number 3                                   ok
  2: test number 2                                   ok
./autotest.at:1576: grep 'bailing out' stderr
stdout:
micro-suite: WARNING: caught signal INT, bailing out
./autotest.at:1577: grep 'bailing out' micro-suite.log
stdout:
micro-suite:18: WARNING: caught signal INT, bailing out
./autotest.at:1588: $MAKE check TESTSUITEFLAGS=; 	   case $? in 1|2)
exit 1;; *) exit $?;; esac
stderr:

micro-suite: WARNING: caught signal INT, bailing out
make[4]: *** [Makefile:5: check] Error 130
stdout:
make[4]: Entering directory
'/p/work1/oppe/autoconf-2.69/tests/testsuite.dir/209'
/bin/bash './micro-suite' 
## -------------------------------------------------------------- ##
## GNU Nonsense 1.0 test suite: suite to test parallel execution. ##
## -------------------------------------------------------------- ##
  1: test number 1                                   ok
  2: test number 2                                   ok
  3: test number 3                                   ok
  4: killer test                                    make[4]: Leaving
directory '/p/work1/oppe/autoconf-
2.69/tests/testsuite.dir/209'
./autotest.at:1591: grep 'bailing out' stderr
stdout:
micro-suite: WARNING: caught signal INT, bailing out
./autotest.at:1592: grep 'bailing out' micro-suite.log
stdout:
micro-suite:18: WARNING: caught signal INT, bailing out
./autotest.at:1594: $MAKE check TESTSUITEFLAGS=--jobs=3; 	   case $?
in 1|2) exit 1;; *) exit $?;
; esac
stderr:
micro-suite: WARNING: caught signal INT, bailing out
make[4]: *** [Makefile:5: check] Error 130
stdout:
make[4]: Entering directory
'/p/work1/oppe/autoconf-2.69/tests/testsuite.dir/209'
/bin/bash './micro-suite' --jobs=3
## -------------------------------------------------------------- ##
## GNU Nonsense 1.0 test suite: suite to test parallel execution. ##
## -------------------------------------------------------------- ##

  3: test number 3                                   ok
  2: test number 2                                   ok
make[4]: Leaving directory
'/p/work1/oppe/autoconf-2.69/tests/testsuite.dir/209'
./autotest.at:1597: grep 'bailing out' stderr
stdout:
micro-suite: WARNING: caught signal INT, bailing out
./autotest.at:1598: grep 'bailing out' micro-suite.log
stdout:
micro-suite:18: WARNING: caught signal INT, bailing out
./autotest.at:1565: $CONFIG_SHELL ./micro-suite
stderr:

micro-suite: WARNING: caught signal TERM, bailing out
stdout:
## -------------------------------------------------------------- ##
## GNU Nonsense 1.0 test suite: suite to test parallel execution. ##
## -------------------------------------------------------------- ##
  1: test number 1                                   ok
  2: test number 2                                   ok
  3: test number 3                                   ok
  4: killer test                                    ./autotest.at:1568: grep
'bailing out' stderr
stdout:
micro-suite: WARNING: caught signal TERM, bailing out
./autotest.at:1569: grep 'bailing out' micro-suite.log
stdout:
micro-suite:18: WARNING: caught signal TERM, bailing out
./autotest.at:1571: grep '[iI]nterrupt[	 ]' stderr
./autotest.at:1574: $CONFIG_SHELL ./micro-suite --jobs=3
stderr:
micro-suite: WARNING: caught signal TERM, bailing out
stdout:
## -------------------------------------------------------------- ##
## GNU Nonsense 1.0 test suite: suite to test parallel execution. ##
## -------------------------------------------------------------- ##

  2: test number 2                                   ok
  3: test number 3                                   ok
./autotest.at:1576: grep 'bailing out' stderr
stdout:
micro-suite: WARNING: caught signal TERM, bailing out
./autotest.at:1577: grep 'bailing out' micro-suite.log
stdout:
micro-suite:18: WARNING: caught signal TERM, bailing out
./autotest.at:1588: $MAKE check TESTSUITEFLAGS=; 	   case $? in 1|2)
exit 1;; *) exit $?;; esac
stderr:

micro-suite: WARNING: caught signal TERM, bailing out
make[4]: *** [Makefile:5: check] Error 143
stdout:
make[4]: Entering directory
'/p/work1/oppe/autoconf-2.69/tests/testsuite.dir/209'
/bin/bash './micro-suite' 
## -------------------------------------------------------------- ##
## GNU Nonsense 1.0 test suite: suite to test parallel execution. ##
## -------------------------------------------------------------- ##
  1: test number 1                                   ok
  2: test number 2                                   ok
  3: test number 3                                   ok
  4: killer test                                    make[4]: Leaving
directory '/p/work1/oppe/autoconf-
2.69/tests/testsuite.dir/209'
./autotest.at:1591: grep 'bailing out' stderr
stdout:
micro-suite: WARNING: caught signal TERM, bailing out
./autotest.at:1592: grep 'bailing out' micro-suite.log
stdout:
micro-suite:18: WARNING: caught signal TERM, bailing out
./autotest.at:1594: $MAKE check TESTSUITEFLAGS=--jobs=3; 	   case $?
in 1|2) exit 1;; *) exit $?;
; esac
stderr:
micro-suite: WARNING: caught signal TERM, bailing out
make[4]: *** [Makefile:5: check] Error 143
stdout:
make[4]: Entering directory
'/p/work1/oppe/autoconf-2.69/tests/testsuite.dir/209'
/bin/bash './micro-suite' --jobs=3
## -------------------------------------------------------------- ##
## GNU Nonsense 1.0 test suite: suite to test parallel execution. ##
## -------------------------------------------------------------- ##

  3: test number 3                                   ok
  2: test number 2                                   ok
make[4]: Leaving directory
'/p/work1/oppe/autoconf-2.69/tests/testsuite.dir/209'
./autotest.at:1597: grep 'bailing out' stderr
stdout:
micro-suite: WARNING: caught signal TERM, bailing out
./autotest.at:1598: grep 'bailing out' micro-suite.log
stdout:
micro-suite:18: WARNING: caught signal TERM, bailing out
./autotest.at:1611: ($CONFIG_SHELL ./micro-suite -d -3 5-; echo $? >status)
| sed 5q
stderr:
stdout:
## -------------------------------------------------------------- ##
## GNU Nonsense 1.0 test suite: suite to test parallel execution. ##
## -------------------------------------------------------------- ##
  1: test number 1                                   ok
  2: test number 2                                   ok
./autotest.at:1613: grep '5.*ok' stdout
./autotest.at:1616: test ! -s status || grep 141 status || grep 269 status
stdout:
./autotest.at:1616: exit code was 1, expected 0
./micro-suite.log:
> ## -------------------------------------------------------------- ##
> ## GNU Nonsense 1.0 test suite: suite to test parallel execution. ##
> ## -------------------------------------------------------------- ##
> 
> micro-suite: command line was:
>   $ ./micro-suite --jobs=3
> 
> ## --------- ##
> ## Platform. ##
> ## --------- ##
> 
> hostname = r1i0n5
> uname -m = x86_64
> uname -r = 3.10.0-693.el7.x86_64
> uname -s = Linux
> uname -v = #1 SMP Thu Jul 6 19:56:57 EDT 2017
> 
> /usr/bin/uname -p = x86_64
> /bin/uname -X     = unknown
> 
> /bin/arch              = x86_64
> /usr/bin/arch -k       = unknown
> /usr/convex/getsysinfo = unknown
> /usr/bin/hostinfo      = unknown
> /bin/machine           = unknown
> /usr/bin/oslevel       = unknown
> /bin/universe          = unknown
> 
> PATH: /p/work1/oppe/autoconf-2.69/tests
> PATH: /p/home/oppe/gcc/9.2.0/bin
> PATH: /p/app/gnu/6.3.0/bin
> PATH: /opt/sgi/sbin
> PATH: /opt/sgi/bin
> PATH: /usr/lib64/qt-3.3/bin
> PATH: /bin
> PATH: /usr/bin
> PATH: /usr/local/sbin
> PATH: /usr/sbin
> PATH: /opt/c3/bin
> PATH: /opt/pbs/bin
> PATH: /sbin
> PATH: /p/home/oppe/bin
> 
> micro-suite: atconfig:
> | at_testdir=.
> | abs_builddir='/p/work1/oppe/autoconf-2.69/tests/testsuite.dir/209'
> | at_srcdir=.
> | abs_srcdir='/p/work1/oppe/autoconf-2.69/tests/testsuite.dir/209'
> | at_top_srcdir=.
> | abs_top_srcdir='/p/work1/oppe/autoconf-2.69/tests/testsuite.dir/209'
> | at_top_build_prefix=
> | abs_top_builddir='/p/work1/oppe/autoconf-2.69/tests/testsuite.dir/209'
> 
> micro-suite: atlocal:
> | suite_pid=$$
> | export suite_pid
> 
> ## ---------------- ##
> ## Tested programs. ##
> ## ---------------- ##
> 
> ## ------------------ ##
> ## Running the tests. ##
> ## ------------------ ##
> micro-suite: starting at: Wed Sep  4 02:25:46 EDT 2019
> 2. test number 2 (micro-suite.at:5): ok     (0m0.000s 0m0.001s)
> 3. test number 3 (micro-suite.at:8): ok     (0m0.000s 0m0.002s)
> micro-suite:18: WARNING: caught signal TERM, bailing out
209. autotest.at:1511: 209. parallel autotest and signal handling
(autotest.at:1511): FAILED (autotest.
at:1616)


******************************************
File:  tests/testsuite.dir/503/testsuite.log
******************************************


#                             -*- compilation -*-
503. autoscan.at:20: testing autoscan ...
./autoscan.at:44: autoscan
--- /dev/null	2019-08-16 12:15:16.241990689 -0400
+++ /p/work1/oppe/autoconf-2.69/tests/testsuite.dir/at-groups/503/stderr
2019-09-04 02:34:14.000
000000 -0400
@@ -0,0 +1 @@
+Unescaped left brace in regex is passed through in regex; marked by <--
HERE in m/\${ <-- HERE [^\}]*}
/ at /p/work1/oppe/autoconf-2.69/bin/autoscan line 361.
503. autoscan.at:20: 503. autoscan (autoscan.at:20): FAILED (autoscan.at:44)


Are these errors serious?

Tom Oppe
smime.p7s (application/pkcs7-signature, 5.3 KB) - not displayed
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.