[PATCH] maint: Update files from upstream with 'make fetch'
"Issam E. Maghni" <[email protected]>
| Newsgroups | gmane.comp.sysutils.automake.patches |
|---|---|
| Message-ID | <[email protected]> |
* lib/config.guess: Update. * lib/config.sub: Likewise. * lib/gendocs_template: Likewise. * lib/gitlog-to-changelog: Likewise. * lib/texinfo.tex: Likewise. * lib/update-copyright: Likewise. Signed-off-by: Issam E. Maghni <[email protected]> --- lib/config.guess | 48 +++- lib/config.sub | 584 ++++++++++++++++++++++------------------ lib/gendocs_template | 12 +- lib/gitlog-to-changelog | 4 +- lib/texinfo.tex | 387 +++++++++++++++++--------- lib/update-copyright | 4 +- 6 files changed, 623 insertions(+), 416 deletions(-) diff --git a/lib/config.guess b/lib/config.guess index 45001cfec..9aff91cfd 100755 --- a/lib/config.guess +++ b/lib/config.guess @@ -2,7 +2,7 @@ # Attempt to guess a canonical system name. # Copyright 1992-2020 Free Software Foundation, Inc. -timestamp='2020-01-01' +timestamp='2020-08-17' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -404,7 +404,7 @@ case "$UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION" in # If there is a compiler, see if it is configured for 64-bit objects. # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. # This test works for both compilers. - if [ "$CC_FOR_BUILD" != no_compiler_found ]; then + if test "$CC_FOR_BUILD" != no_compiler_found; then if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ grep IS_64BIT_ARCH >/dev/null @@ -544,10 +544,10 @@ EOF AViiON:dgux:*:*) # DG/UX returns AViiON for all architectures UNAME_PROCESSOR=`/usr/bin/uname -p` - if [ "$UNAME_PROCESSOR" = mc88100 ] || [ "$UNAME_PROCESSOR" = mc88110 ] + if test "$UNAME_PROCESSOR" = mc88100 || test "$UNAME_PROCESSOR" = mc88110 then - if [ "$TARGET_BINARY_INTERFACE"x = m88kdguxelfx ] || \ - [ "$TARGET_BINARY_INTERFACE"x = x ] + if test "$TARGET_BINARY_INTERFACE"x = m88kdguxelfx || \ + test "$TARGET_BINARY_INTERFACE"x = x then echo m88k-dg-dgux"$UNAME_RELEASE" else @@ -580,7 +580,7 @@ EOF echo i386-ibm-aix exit ;; ia64:AIX:*:*) - if [ -x /usr/bin/oslevel ] ; then + if test -x /usr/bin/oslevel ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV="$UNAME_VERSION.$UNAME_RELEASE" @@ -620,7 +620,7 @@ EOF else IBM_ARCH=powerpc fi - if [ -x /usr/bin/lslpp ] ; then + if test -x /usr/bin/lslpp ; then IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc | awk -F: '{ print $3 }' | sed s/[0-9]*$/0/` else @@ -655,7 +655,7 @@ EOF 9000/31?) HP_ARCH=m68000 ;; 9000/[34]??) HP_ARCH=m68k ;; 9000/[678][0-9][0-9]) - if [ -x /usr/bin/getconf ]; then + if test -x /usr/bin/getconf; then sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` case "$sc_cpu_version" in @@ -669,7 +669,7 @@ EOF esac ;; esac fi - if [ "$HP_ARCH" = "" ]; then + if test "$HP_ARCH" = ""; then set_cc_for_build sed 's/^ //' << EOF > "$dummy.c" @@ -708,7 +708,7 @@ EOF test -z "$HP_ARCH" && HP_ARCH=hppa fi ;; esac - if [ "$HP_ARCH" = hppa2.0w ] + if test "$HP_ARCH" = hppa2.0w then set_cc_for_build @@ -782,7 +782,7 @@ EOF echo hppa1.0-hp-osf exit ;; i*86:OSF1:*:*) - if [ -x /usr/sbin/sysversion ] ; then + if test -x /usr/sbin/sysversion ; then echo "$UNAME_MACHINE"-unknown-osf1mk else echo "$UNAME_MACHINE"-unknown-osf1 @@ -1095,7 +1095,17 @@ EOF echo "$UNAME_MACHINE"-dec-linux-"$LIBC" exit ;; x86_64:Linux:*:*) - echo "$UNAME_MACHINE"-pc-linux-"$LIBC" + set_cc_for_build + LIBCABI=$LIBC + if test "$CC_FOR_BUILD" != no_compiler_found; then + if (echo '#ifdef __ILP32__'; echo IS_X32; echo '#endif') | \ + (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_X32 >/dev/null + then + LIBCABI="$LIBC"x32 + fi + fi + echo "$UNAME_MACHINE"-pc-linux-"$LIBCABI" exit ;; xtensa*:Linux:*:*) echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" @@ -1284,7 +1294,7 @@ EOF echo mips-sony-newsos6 exit ;; R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) - if [ -d /usr/nec ]; then + if test -d /usr/nec; then echo mips-nec-sysv"$UNAME_RELEASE" else echo mips-unknown-sysv"$UNAME_RELEASE" @@ -1332,6 +1342,9 @@ EOF *:Rhapsody:*:*) echo "$UNAME_MACHINE"-apple-rhapsody"$UNAME_RELEASE" exit ;; + arm64:Darwin:*:*) + echo aarch64-apple-darwin"$UNAME_RELEASE" + exit ;; *:Darwin:*:*) UNAME_PROCESSOR=`uname -p` case $UNAME_PROCESSOR in @@ -1346,7 +1359,7 @@ EOF else set_cc_for_build fi - if [ "$CC_FOR_BUILD" != no_compiler_found ]; then + if test "$CC_FOR_BUILD" != no_compiler_found; then if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ grep IS_64BIT_ARCH >/dev/null @@ -1629,6 +1642,12 @@ copies of config.guess and config.sub with the latest versions from: https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess and https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub +EOF + +year=`echo $timestamp | sed 's,-.*,,'` +# shellcheck disable=SC2003 +if test "`expr "\`date +%Y\`" - "$year"`" -lt 3 ; then + cat >&2 <<EOF If $0 has already been updated, send the following data and any information you think might be pertinent to [email protected] to @@ -1656,6 +1675,7 @@ UNAME_RELEASE = "$UNAME_RELEASE" UNAME_SYSTEM = "$UNAME_SYSTEM" UNAME_VERSION = "$UNAME_VERSION" EOF +fi exit 1 diff --git a/lib/config.sub b/lib/config.sub index f02d43ad5..0753e3084 100755 --- a/lib/config.sub +++ b/lib/config.sub @@ -2,7 +2,7 @@ # Configuration validation subroutine script. # Copyright 1992-2020 Free Software Foundation, Inc. -timestamp='2020-01-01' +timestamp='2020-08-17' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -124,28 +124,27 @@ case $1 in ;; *-*-*-*) basic_machine=$field1-$field2 - os=$field3-$field4 + basic_os=$field3-$field4 ;; *-*-*) # Ambiguous whether COMPANY is present, or skipped and KERNEL-OS is two # parts maybe_os=$field2-$field3 case $maybe_os in - nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc \ - | linux-newlib* | linux-musl* | linux-uclibc* | uclinux-uclibc* \ + nto-qnx* | linux-* | uclinux-uclibc* \ | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* \ | netbsd*-eabi* | kopensolaris*-gnu* | cloudabi*-eabi* \ | storm-chaos* | os2-emx* | rtmk-nova*) basic_machine=$field1 - os=$maybe_os + basic_os=$maybe_os ;; android-linux) basic_machine=$field1-unknown - os=linux-android + basic_os=linux-android ;; *) basic_machine=$field1-$field2 - os=$field3 + basic_os=$field3 ;; esac ;; @@ -154,7 +153,7 @@ case $1 in case $field1-$field2 in decstation-3100) basic_machine=mips-dec - os= + basic_os= ;; *-*) # Second component is usually, but not always the OS @@ -162,7 +161,7 @@ case $1 in # Prevent following clause from handling this valid os sun*os*) basic_machine=$field1 - os=$field2 + basic_os=$field2 ;; # Manufacturers dec* | mips* | sequent* | encore* | pc533* | sgi* | sony* \ @@ -175,11 +174,11 @@ case $1 in | microblaze* | sim | cisco \ | oki | wec | wrs | winbond) basic_machine=$field1-$field2 - os= + basic_os= ;; *) basic_machine=$field1 - os=$field2 + basic_os=$field2 ;; esac ;; @@ -191,447 +190,451 @@ case $1 in case $field1 in 386bsd) basic_machine=i386-pc - os=bsd + basic_os=bsd ;; a29khif) basic_machine=a29k-amd - os=udi + basic_os=udi ;; adobe68k) basic_machine=m68010-adobe - os=scout + basic_os=scout ;; alliant) basic_machine=fx80-alliant - os= + basic_os= ;; altos | altos3068) basic_machine=m68k-altos - os= + basic_os= ;; am29k) basic_machine=a29k-none - os=bsd + basic_os=bsd ;; amdahl) basic_machine=580-amdahl - os=sysv + basic_os=sysv ;; amiga) basic_machine=m68k-unknown - os= + basic_os= ;; amigaos | amigados) basic_machine=m68k-unknown - os=amigaos + basic_os=amigaos ;; amigaunix | amix) basic_machine=m68k-unknown - os=sysv4 + basic_os=sysv4 ;; apollo68) basic_machine=m68k-apollo - os=sysv + basic_os=sysv ;; apollo68bsd) basic_machine=m68k-apollo - os=bsd + basic_os=bsd ;; aros) basic_machine=i386-pc - os=aros + basic_os=aros ;; aux) basic_machine=m68k-apple - os=aux + basic_os=aux ;; balance) basic_machine=ns32k-sequent - os=dynix + basic_os=dynix ;; blackfin) basic_machine=bfin-unknown - os=linux + basic_os=linux ;; cegcc) basic_machine=arm-unknown - os=cegcc + basic_os=cegcc ;; convex-c1) basic_machine=c1-convex - os=bsd + basic_os=bsd ;; convex-c2) basic_machine=c2-convex - os=bsd + basic_os=bsd ;; convex-c32) basic_machine=c32-convex - os=bsd + basic_os=bsd ;; convex-c34) basic_machine=c34-convex - os=bsd + basic_os=bsd ;; convex-c38) basic_machine=c38-convex - os=bsd + basic_os=bsd ;; cray) basic_machine=j90-cray - os=unicos + basic_os=unicos ;; crds | unos) basic_machine=m68k-crds - os= + basic_os= ;; da30) basic_machine=m68k-da30 - os= + basic_os= ;; decstation | pmax | pmin | dec3100 | decstatn) basic_machine=mips-dec - os= + basic_os= ;; delta88) basic_machine=m88k-motorola - os=sysv3 + basic_os=sysv3 ;; dicos) basic_machine=i686-pc - os=dicos + basic_os=dicos ;; djgpp) basic_machine=i586-pc - os=msdosdjgpp + basic_os=msdosdjgpp ;; ebmon29k) basic_machine=a29k-amd - os=ebmon + basic_os=ebmon ;; es1800 | OSE68k | ose68k | ose | OSE) basic_machine=m68k-ericsson - os=ose + basic_os=ose ;; gmicro) basic_machine=tron-gmicro - os=sysv + basic_os=sysv ;; go32) basic_machine=i386-pc - os=go32 + basic_os=go32 ;; h8300hms) basic_machine=h8300-hitachi - os=hms + basic_os=hms ;; h8300xray) basic_machine=h8300-hitachi - os=xray + basic_os=xray ;; h8500hms) basic_machine=h8500-hitachi - os=hms + basic_os=hms ;; harris) basic_machine=m88k-harris - os=sysv3 + basic_os=sysv3 ;; hp300 | hp300hpux) basic_machine=m68k-hp - os=hpux + basic_os=hpux ;; hp300bsd) basic_machine=m68k-hp - os=bsd + basic_os=bsd ;; hppaosf) basic_machine=hppa1.1-hp - os=osf + basic_os=osf ;; hppro) basic_machine=hppa1.1-hp - os=proelf + basic_os=proelf ;; i386mach) basic_machine=i386-mach - os=mach + basic_os=mach ;; isi68 | isi) basic_machine=m68k-isi - os=sysv + basic_os=sysv ;; m68knommu) basic_machine=m68k-unknown - os=linux + basic_os=linux ;; magnum | m3230) basic_machine=mips-mips - os=sysv + basic_os=sysv ;; merlin) basic_machine=ns32k-utek - os=sysv + basic_os=sysv ;; mingw64) basic_machine=x86_64-pc - os=mingw64 + basic_os=mingw64 ;; mingw32) basic_machine=i686-pc - os=mingw32 + basic_os=mingw32 ;; mingw32ce) basic_machine=arm-unknown - os=mingw32ce + basic_os=mingw32ce ;; monitor) basic_machine=m68k-rom68k - os=coff + basic_os=coff ;; morphos) basic_machine=powerpc-unknown - os=morphos + basic_os=morphos ;; moxiebox) basic_machine=moxie-unknown - os=moxiebox + basic_os=moxiebox ;; msdos) basic_machine=i386-pc - os=msdos + basic_os=msdos ;; msys) basic_machine=i686-pc - os=msys + basic_os=msys ;; mvs) basic_machine=i370-ibm - os=mvs + basic_os=mvs ;; nacl) basic_machine=le32-unknown - os=nacl + basic_os=nacl ;; ncr3000) basic_machine=i486-ncr - os=sysv4 + basic_os=sysv4 ;; netbsd386) basic_machine=i386-pc - os=netbsd + basic_os=netbsd ;; netwinder) basic_machine=armv4l-rebel - os=linux + basic_os=linux ;; news | news700 | news800 | news900) basic_machine=m68k-sony - os=newsos + basic_os=newsos ;; news1000) basic_machine=m68030-sony - os=newsos + basic_os=newsos ;; necv70) basic_machine=v70-nec - os=sysv + basic_os=sysv ;; nh3000) basic_machine=m68k-harris - os=cxux + basic_os=cxux ;; nh[45]000) basic_machine=m88k-harris - os=cxux + basic_os=cxux ;; nindy960) basic_machine=i960-intel - os=nindy + basic_os=nindy ;; mon960) basic_machine=i960-intel - os=mon960 + basic_os=mon960 ;; nonstopux) basic_machine=mips-compaq - os=nonstopux + basic_os=nonstopux ;; os400) basic_machine=powerpc-ibm - os=os400 + basic_os=os400 ;; OSE68000 | ose68000) basic_machine=m68000-ericsson - os=ose + basic_os=ose ;; os68k) basic_machine=m68k-none - os=os68k + basic_os=os68k ;; paragon) basic_machine=i860-intel - os=osf + basic_os=osf ;; parisc) basic_machine=hppa-unknown - os=linux + basic_os=linux + ;; + psp) + basic_machine=mipsallegrexel-sony + basic_os=psp ;; pw32) basic_machine=i586-unknown - os=pw32 + basic_os=pw32 ;; rdos | rdos64) basic_machine=x86_64-pc - os=rdos + basic_os=rdos ;; rdos32) basic_machine=i386-pc - os=rdos + basic_os=rdos ;; rom68k) basic_machine=m68k-rom68k - os=coff + basic_os=coff ;; sa29200) basic_machine=a29k-amd - os=udi + basic_os=udi ;; sei) basic_machine=mips-sei - os=seiux + basic_os=seiux ;; sequent) basic_machine=i386-sequent - os= + basic_os= ;; sps7) basic_machine=m68k-bull - os=sysv2 + basic_os=sysv2 ;; st2000) basic_machine=m68k-tandem - os= + basic_os= ;; stratus) basic_machine=i860-stratus - os=sysv4 + basic_os=sysv4 ;; sun2) basic_machine=m68000-sun - os= + basic_os= ;; sun2os3) basic_machine=m68000-sun - os=sunos3 + basic_os=sunos3 ;; sun2os4) basic_machine=m68000-sun - os=sunos4 + basic_os=sunos4 ;; sun3) basic_machine=m68k-sun - os= + basic_os= ;; sun3os3) basic_machine=m68k-sun - os=sunos3 + basic_os=sunos3 ;; sun3os4) basic_machine=m68k-sun - os=sunos4 + basic_os=sunos4 ;; sun4) basic_machine=sparc-sun - os= + basic_os= ;; sun4os3) basic_machine=sparc-sun - os=sunos3 + basic_os=sunos3 ;; sun4os4) basic_machine=sparc-sun - os=sunos4 + basic_os=sunos4 ;; sun4sol2) basic_machine=sparc-sun - os=solaris2 + basic_os=solaris2 ;; sun386 | sun386i | roadrunner) basic_machine=i386-sun - os= + basic_os= ;; sv1) basic_machine=sv1-cray - os=unicos + basic_os=unicos ;; symmetry) basic_machine=i386-sequent - os=dynix + basic_os=dynix ;; t3e) basic_machine=alphaev5-cray - os=unicos + basic_os=unicos ;; t90) basic_machine=t90-cray - os=unicos + basic_os=unicos ;; toad1) basic_machine=pdp10-xkl - os=tops20 + basic_os=tops20 ;; tpf) basic_machine=s390x-ibm - os=tpf + basic_os=tpf ;; udi29k) basic_machine=a29k-amd - os=udi + basic_os=udi ;; ultra3) basic_machine=a29k-nyu - os=sym1 + basic_os=sym1 ;; v810 | necv810) basic_machine=v810-nec - os=none + basic_os=none ;; vaxv) basic_machine=vax-dec - os=sysv + basic_os=sysv ;; vms) basic_machine=vax-dec - os=vms + basic_os=vms ;; vsta) basic_machine=i386-pc - os=vsta + basic_os=vsta ;; vxworks960) basic_machine=i960-wrs - os=vxworks + basic_os=vxworks ;; vxworks68) basic_machine=m68k-wrs - os=vxworks + basic_os=vxworks ;; vxworks29k) basic_machine=a29k-wrs - os=vxworks + basic_os=vxworks ;; xbox) basic_machine=i686-pc - os=mingw32 + basic_os=mingw32 ;; ymp) basic_machine=ymp-cray - os=unicos + basic_os=unicos ;; *) basic_machine=$1 - os= + basic_os= ;; esac ;; @@ -683,17 +686,17 @@ case $basic_machine in bluegene*) cpu=powerpc vendor=ibm - os=cnk + basic_os=cnk ;; decsystem10* | dec10*) cpu=pdp10 vendor=dec - os=tops10 + basic_os=tops10 ;; decsystem20* | dec20*) cpu=pdp10 vendor=dec - os=tops20 + basic_os=tops20 ;; delta | 3300 | motorola-3300 | motorola-delta \ | 3300-motorola | delta-motorola) @@ -703,7 +706,7 @@ case $basic_machine in dpx2*) cpu=m68k vendor=bull - os=sysv3 + basic_os=sysv3 ;; encore | umax | mmax) cpu=ns32k @@ -712,7 +715,7 @@ case $basic_machine in elxsi) cpu=elxsi vendor=elxsi - os=${os:-bsd} + basic_os=${basic_os:-bsd} ;; fx2800) cpu=i860 @@ -725,7 +728,7 @@ case $basic_machine in h3050r* | hiux*) cpu=hppa1.1 vendor=hitachi - os=hiuxwe2 + basic_os=hiuxwe2 ;; hp3k9[0-9][0-9] | hp9[0-9][0-9]) cpu=hppa1.0 @@ -768,36 +771,36 @@ case $basic_machine in i*86v32) cpu=`echo "$1" | sed -e 's/86.*/86/'` vendor=pc - os=sysv32 + basic_os=sysv32 ;; i*86v4*) cpu=`echo "$1" | sed -e 's/86.*/86/'` vendor=pc - os=sysv4 + basic_os=sysv4 ;; i*86v) cpu=`echo "$1" | sed -e 's/86.*/86/'` vendor=pc - os=sysv + basic_os=sysv ;; i*86sol2) cpu=`echo "$1" | sed -e 's/86.*/86/'` vendor=pc - os=solaris2 + basic_os=solaris2 ;; j90 | j90-cray) cpu=j90 vendor=cray - os=${os:-unicos} + basic_os=${basic_os:-unicos} ;; iris | iris4d) cpu=mips vendor=sgi - case $os in + case $basic_os in irix*) ;; *) - os=irix4 + basic_os=irix4 ;; esac ;; @@ -808,26 +811,26 @@ case $basic_machine in *mint | mint[0-9]* | *MiNT | *MiNT[0-9]*) cpu=m68k vendor=atari - os=mint + basic_os=mint ;; news-3600 | risc-news) cpu=mips vendor=sony - os=newsos + basic_os=newsos ;; next | m*-next) cpu=m68k vendor=next - case $os in + case $basic_os in openstep*) ;; nextstep*) ;; ns2*) - os=nextstep2 + basic_os=nextstep2 ;; *) - os=nextstep3 + basic_os=nextstep3 ;; esac ;; @@ -838,12 +841,12 @@ case $basic_machine in op50n-* | op60c-*) cpu=hppa1.1 vendor=oki - os=proelf + basic_os=proelf ;; pa-hitachi) cpu=hppa1.1 vendor=hitachi - os=hiuxwe2 + basic_os=hiuxwe2 ;; pbd) cpu=sparc @@ -880,12 +883,12 @@ case $basic_machine in sde) cpu=mipsisa32 vendor=sde - os=${os:-elf} + basic_os=${basic_os:-elf} ;; simso-wrs) cpu=sparclite vendor=wrs - os=vxworks + basic_os=vxworks ;; tower | tower-32) cpu=m68k @@ -902,7 +905,7 @@ case $basic_machine in w89k-*) cpu=hppa1.1 vendor=winbond - os=proelf + basic_os=proelf ;; none) cpu=none @@ -955,11 +958,11 @@ case $cpu-$vendor in # some cases the only manufacturer, in others, it is the most popular. craynv-unknown) vendor=cray - os=${os:-unicosmp} + basic_os=${basic_os:-unicosmp} ;; c90-unknown | c90-cray) vendor=cray - os=${os:-unicos} + basic_os=${Basic_os:-unicos} ;; fx80-unknown) vendor=alliant @@ -1003,7 +1006,7 @@ case $cpu-$vendor in dpx20-unknown | dpx20-bull) cpu=rs6000 vendor=bull - os=${os:-bosx} + basic_os=${basic_os:-bosx} ;; # Here we normalize CPU types irrespective of the vendor @@ -1012,7 +1015,7 @@ case $cpu-$vendor in ;; blackfin-*) cpu=bfin - os=linux + basic_os=linux ;; c54x-*) cpu=tic54x @@ -1025,7 +1028,7 @@ case $cpu-$vendor in ;; e500v[12]-*) cpu=powerpc - os=$os"spe" + basic_os=${basic_os}"spe" ;; mips3*-*) cpu=mips64 @@ -1035,7 +1038,7 @@ case $cpu-$vendor in ;; m68knommu-*) cpu=m68k - os=linux + basic_os=linux ;; m9s12z-* | m68hcs12z-* | hcs12z-* | s12z-*) cpu=s12z @@ -1045,7 +1048,7 @@ case $cpu-$vendor in ;; parisc-*) cpu=hppa - os=linux + basic_os=linux ;; pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) cpu=i586 @@ -1101,11 +1104,14 @@ case $cpu-$vendor in xscale-* | xscalee[bl]-*) cpu=`echo "$cpu" | sed 's/^xscale/arm/'` ;; + arm64-*) + cpu=aarch64 + ;; # Recognize the canonical CPU Types that limit and/or modify the # company names they are paired with. cr16-*) - os=${os:-elf} + basic_os=${basic_os:-elf} ;; crisv32-* | etraxfs*-*) cpu=crisv32 @@ -1116,7 +1122,7 @@ case $cpu-$vendor in vendor=axis ;; crx-*) - os=${os:-elf} + basic_os=${basic_os:-elf} ;; neo-tandem) cpu=neo @@ -1138,16 +1144,12 @@ case $cpu-$vendor in cpu=nsx vendor=tandem ;; - s390-*) - cpu=s390 - vendor=ibm - ;; - s390x-*) - cpu=s390x - vendor=ibm + mipsallegrexel-sony) + cpu=mipsallegrexel + vendor=sony ;; tile*-*) - os=${os:-linux-gnu} + basic_os=${basic_os:-linux-gnu} ;; *) @@ -1164,7 +1166,7 @@ case $cpu-$vendor in | am33_2.0 \ | amdgcn \ | arc | arceb \ - | arm | arm[lb]e | arme[lb] | armv* \ + | arm | arm[lb]e | arme[lb] | armv* \ | avr | avr32 \ | asmjs \ | ba \ @@ -1229,6 +1231,7 @@ case $cpu-$vendor in | pyramid \ | riscv | riscv32 | riscv64 \ | rl78 | romp | rs6000 | rx \ + | s390 | s390x \ | score \ | sh | shl \ | sh[1234] | sh[24]a | sh[24]ae[lb] | sh[23]e | she[lb] | sh[lb]e \ @@ -1275,8 +1278,43 @@ esac # Decode manufacturer-specific aliases for certain operating systems. -if [ x$os != x ] +if test x$basic_os != x then + +# First recognize some ad-hoc caes, or perhaps split kernel-os, or else just +# set os. +case $basic_os in + gnu/linux*) + kernel=linux + os=`echo $basic_os | sed -e 's|gnu/linux|gnu|'` + ;; + nto-qnx*) + kernel=nto + os=`echo $basic_os | sed -e 's|nto-qnx|qnx|'` + ;; + *-*) + # shellcheck disable=SC2162 + IFS="-" read kernel os <<EOF +$basic_os +EOF + ;; + # Default OS when just kernel was specified + nto*) + kernel=nto + os=`echo $basic_os | sed -e 's|nto|qnx|'` + ;; + linux*) + kernel=linux + os=`echo $basic_os | sed -e 's|linux|gnu|'` + ;; + *) + kernel= + os=$basic_os + ;; +esac + +# Now, normalize the OS (knowing we just have one component, it's not a kernel, +# etc.) case $os in # First match some system type aliases that might get confused # with valid system types. @@ -1296,9 +1334,6 @@ case $os in unixware*) os=sysv4.2uw ;; - gnu/linux*) - os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` - ;; # es1800 is here to avoid being matched by es* (a different OS) es1800*) os=ose @@ -1322,10 +1357,7 @@ case $os in sco3.2.[4-9]*) os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` ;; - sco3.2v[4-9]* | sco5v6*) - # Don't forget version if it is 3.2v4 or newer. - ;; - scout) + sco*v* | scout) # Don't match below ;; sco*) @@ -1334,41 +1366,6 @@ case $os in psos*) os=psos ;; - # Now accept the basic system types. - # The portable systems comes first. - # Each alternative MUST end in a * to match a version number. - # sysv* is not here because it comes later, after sysvr4. - gnu* | bsd* | mach* | minix* | genix* | ultrix* | irix* \ - | *vms* | esix* | aix* | cnk* | sunos | sunos[34]*\ - | hpux* | unos* | osf* | luna* | dgux* | auroraux* | solaris* \ - | sym* | kopensolaris* | plan9* \ - | amigaos* | amigados* | msdos* | newsos* | unicos* | aof* \ - | aos* | aros* | cloudabi* | sortix* | twizzler* \ - | nindy* | vxsim* | vxworks* | ebmon* | hms* | mvs* \ - | clix* | riscos* | uniplus* | iris* | isc* | rtu* | xenix* \ - | knetbsd* | mirbsd* | netbsd* \ - | bitrig* | openbsd* | solidbsd* | libertybsd* | os108* \ - | ekkobsd* | kfreebsd* | freebsd* | riscix* | lynxos* \ - | bosx* | nextstep* | cxux* | aout* | elf* | oabi* \ - | ptx* | coff* | ecoff* | winnt* | domain* | vsta* \ - | udi* | eabi* | lites* | ieee* | go32* | aux* | hcos* \ - | chorusrdb* | cegcc* | glidix* \ - | cygwin* | msys* | pe* | moss* | proelf* | rtems* \ - | midipix* | mingw32* | mingw64* | linux-gnu* | linux-android* \ - | linux-newlib* | linux-musl* | linux-uclibc* \ - | uxpv* | beos* | mpeix* | udk* | moxiebox* \ - | interix* | uwin* | mks* | rhapsody* | darwin* \ - | openstep* | oskit* | conix* | pw32* | nonstopux* \ - | storm-chaos* | tops10* | tenex* | tops20* | its* \ - | os2* | vos* | palmos* | uclinux* | nucleus* \ - | morphos* | superux* | rtmk* | windiss* \ - | powermax* | dnix* | nx6 | nx7 | sei* | dragonfly* \ - | skyos* | haiku* | rdos* | toppers* | drops* | es* \ - | onefs* | tirtos* | phoenix* | fuchsia* | redox* | bme* \ - | midnightbsd* | amdhsa* | unleashed* | emscripten* | wasi* \ - | nsk* | powerunix) - # Remember, each alternative MUST END IN *, to match a version number. - ;; qnx*) case $cpu in x86 | i*86) @@ -1381,31 +1378,19 @@ case $os in hiux*) os=hiuxwe2 ;; - nto-qnx*) - ;; - nto*) - os=`echo $os | sed -e 's|nto|nto-qnx|'` - ;; - sim | xray | os68k* | v88r* \ - | windows* | osx | abug | netware* | os9* \ - | macos* | mpw* | magic* | mmixware* | mon960* | lnews*) - ;; - linux-dietlibc) - os=linux-dietlibc - ;; - linux*) - os=`echo $os | sed -e 's|linux|linux-gnu|'` - ;; lynx*178) os=lynxos178 ;; lynx*5) os=lynxos5 ;; + lynxos*) + # don't get caught up in next wildcard + ;; lynx*) os=lynxos ;; - mac*) + mac[0-9]*) os=`echo "$os" | sed -e 's|mac|macos|'` ;; opened*) @@ -1475,18 +1460,12 @@ case $os in sysvr4) os=sysv4 ;; - # This must come after sysvr4. - sysv*) - ;; ose*) os=ose ;; *mint | mint[0-9]* | *MiNT | MiNT[0-9]*) os=mint ;; - zvmoe) - os=zvmoe - ;; dicos*) os=dicos ;; @@ -1503,19 +1482,11 @@ case $os in ;; esac ;; - nacl*) - ;; - ios) - ;; - none) - ;; - *-eabi) - ;; *) - echo Invalid configuration \`"$1"\': system \`"$os"\' not recognized 1>&2 - exit 1 + # No normalization, but not necessarily accepted, that comes below. ;; esac + else # Here we handle the default operating systems that come with various machines. @@ -1528,6 +1499,7 @@ else # will signal an error saying that MANUFACTURER isn't an operating # system, and we'll never get to this point. +kernel= case $cpu-$vendor in score-*) os=elf @@ -1539,7 +1511,8 @@ case $cpu-$vendor in os=riscix1.2 ;; arm*-rebel) - os=linux + kernel=linux + os=gnu ;; arm*-semi) os=aout @@ -1705,84 +1678,169 @@ case $cpu-$vendor in os=none ;; esac + fi +# Now, validate our (potentially fixed-up) OS. +case $os in + # Sometimes we do "kernel-abi", so those need to count as OSes. + musl* | newlib* | uclibc*) + ;; + # Likewise for "kernel-libc" + eabi | eabihf | gnueabi | gnueabihf) + ;; + # Now accept the basic system types. + # The portable systems comes first. + # Each alternative MUST end in a * to match a version number. + gnu* | android* | bsd* | mach* | minix* | genix* | ultrix* | irix* \ + | *vms* | esix* | aix* | cnk* | sunos | sunos[34]* \ + | hpux* | unos* | osf* | luna* | dgux* | auroraux* | solaris* \ + | sym* | plan9* | psp* | sim* | xray* | os68k* | v88r* \ + | hiux* | abug | nacl* | netware* | windows* \ + | os9* | macos* | osx* | ios* \ + | mpw* | magic* | mmixware* | mon960* | lnews* \ + | amigaos* | amigados* | msdos* | newsos* | unicos* | aof* \ + | aos* | aros* | cloudabi* | sortix* | twizzler* \ + | nindy* | vxsim* | vxworks* | ebmon* | hms* | mvs* \ + | clix* | riscos* | uniplus* | iris* | isc* | rtu* | xenix* \ + | mirbsd* | netbsd* | dicos* | openedition* | ose* \ + | bitrig* | openbsd* | solidbsd* | libertybsd* | os108* \ + | ekkobsd* | freebsd* | riscix* | lynxos* | os400* \ + | bosx* | nextstep* | cxux* | aout* | elf* | oabi* \ + | ptx* | coff* | ecoff* | winnt* | domain* | vsta* \ + | udi* | lites* | ieee* | go32* | aux* | hcos* \ + | chorusrdb* | cegcc* | glidix* \ + | cygwin* | msys* | pe* | moss* | proelf* | rtems* \ + | midipix* | mingw32* | mingw64* | mint* \ + | uxpv* | beos* | mpeix* | udk* | moxiebox* \ + | interix* | uwin* | mks* | rhapsody* | darwin* \ + | openstep* | oskit* | conix* | pw32* | nonstopux* \ + | storm-chaos* | tops10* | tenex* | tops20* | its* \ + | os2* | vos* | palmos* | uclinux* | nucleus* | morphos* \ + | scout* | superux* | sysv* | rtmk* | tpf* | windiss* \ + | powermax* | dnix* | nx6 | nx7 | sei* | dragonfly* \ + | skyos* | haiku* | rdos* | toppers* | drops* | es* \ + | onefs* | tirtos* | phoenix* | fuchsia* | redox* | bme* \ + | midnightbsd* | amdhsa* | unleashed* | emscripten* | wasi* \ + | nsk* | powerunix* | genode* | zvmoe* ) + ;; + # This one is extra strict with allowed versions + sco3.2v2 | sco3.2v[4-9]* | sco5v6*) + # Don't forget version if it is 3.2v4 or newer. + ;; + none) + ;; + *) + echo Invalid configuration \`"$1"\': OS \`"$os"\' not recognized 1>&2 + exit 1 + ;; +esac + +# As a final step for OS-related things, validate the OS-kernel combination +# (given a valid OS), if there is a kernel. +case $kernel-$os in + linux-gnu* | linux-dietlibc* | linux-android* | linux-newlib* | linux-musl* | linux-uclibc* ) + ;; + -dietlibc* | -newlib* | -musl* | -uclibc* ) + # These are just libc implementations, not actual OSes, and thus + # require a kernel. + echo "Invalid configuration \`$1': libc \`$os' needs explicit kernel." 1>&2 + exit 1 + ;; + kfreebsd*-gnu* | kopensolaris*-gnu*) + ;; + nto-qnx*) + ;; + *-eabi* | *-gnueabi*) + ;; + -*) + # Blank kernel with real OS is always fine. + ;; + *-*) + echo "Invalid configuration \`$1': Kernel \`$kernel' not known to work with OS \`$os'." 1>&2 + exit 1 + ;; +esac + # Here we handle the case where we know the os, and the CPU type, but not the # manufacturer. We pick the logical manufacturer. case $vendor in unknown) - case $os in - riscix*) + case $cpu-$os in + *-riscix*) vendor=acorn ;; - sunos*) + *-sunos*) vendor=sun ;; - cnk*|-aix*) + *-cnk* | *-aix*) vendor=ibm ;; - beos*) + *-beos*) vendor=be ;; - hpux*) + *-hpux*) vendor=hp ;; - mpeix*) + *-mpeix*) vendor=hp ;; - hiux*) + *-hiux*) vendor=hitachi ;; - unos*) + *-unos*) vendor=crds ;; - dgux*) + *-dgux*) vendor=dg ;; - luna*) + *-luna*) vendor=omron ;; - genix*) + *-genix*) vendor=ns ;; - clix*) + *-clix*) vendor=intergraph ;; - mvs* | opened*) + *-mvs* | *-opened*) + vendor=ibm + ;; + *-os400*) vendor=ibm ;; - os400*) + s390-* | s390x-*) vendor=ibm ;; - ptx*) + *-ptx*) vendor=sequent ;; - tpf*) + *-tpf*) vendor=ibm ;; - vxsim* | vxworks* | windiss*) + *-vxsim* | *-vxworks* | *-windiss*) vendor=wrs ;; - aux*) + *-aux*) vendor=apple ;; - hms*) + *-hms*) vendor=hitachi ;; - mpw* | macos*) + *-mpw* | *-macos*) vendor=apple ;; - *mint | mint[0-9]* | *MiNT | MiNT[0-9]*) + *-*mint | *-mint[0-9]* | *-*MiNT | *-MiNT[0-9]*) vendor=atari ;; - vos*) + *-vos*) vendor=stratus ;; esac ;; esac -echo "$cpu-$vendor-$os" +echo "$cpu-$vendor-${kernel:+$kernel-}$os" exit # Local variables: diff --git a/lib/gendocs_template b/lib/gendocs_template index bab2d88e4..ee26d331f 100644 --- a/lib/gendocs_template +++ b/lib/gendocs_template @@ -1,5 +1,15 @@ <!--#include virtual="/server/header.html" --> -<!-- Parent-Version: 1.77 --> +<!-- Parent-Version: 1.78 --> + +<!-- +Copyright (C) 2006-2020 Free Software Foundation, Inc. + +Copying and distribution of this file, with or without modification, +are permitted in any medium without royalty provided the copyright +notice and this notice are preserved. This file is offered as-is, +without any warranty. +--> + <title>%%TITLE%% - GNU Project - Free Software Foundation</title> <!--#include virtual="/server/banner.html" --> <h2>%%TITLE%%</h2> diff --git a/lib/gitlog-to-changelog b/lib/gitlog-to-changelog index 511276757..be8082e7f 100755 --- a/lib/gitlog-to-changelog +++ b/lib/gitlog-to-changelog @@ -31,11 +31,11 @@ # are valid code in both sh and perl. When executed by sh, they re-execute # the script through the perl program found in $PATH. The '-x' option # is essential as well; without it, perl would re-execute the script -# through /bin/sh. When executed by perl, the next two lines are a no-op. +# through /bin/sh. When executed by perl, the next two lines are a no-op. eval 'exec perl -wSx "$0" "$@"' if 0; -my $VERSION = '2018-03-07 03:47'; # UTC +my $VERSION = '2020-04-04 15:07'; # UTC # The definition above must lie within the first 8 lines in order # for the Emacs time-stamp write hook (at end) to update it. # If you change this file with Emacs, please let the write hook diff --git a/lib/texinfo.tex b/lib/texinfo.tex index deca59918..0d2a1fdbc 100644 --- a/lib/texinfo.tex +++ b/lib/texinfo.tex @@ -3,9 +3,9 @@ % Load plain if necessary, i.e., if running under initex. \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi % -\def\texinfoversion{2020-02-11.09} +\def\texinfoversion{2020-06-25.17} % -% Copyright 1985, 1986, 1988, 1990-2019 Free Software Foundation, Inc. +% Copyright 1985, 1986, 1988, 1990-2020 Free Software Foundation, Inc. % % This texinfo.tex file is free software: you can redistribute it and/or % modify it under the terms of the GNU General Public License as @@ -33,7 +33,7 @@ % The texinfo.tex in any given distribution could well be out % of date, so if that's what you're using, please check. % -% Send bug reports to [email protected]. Please include including a +% Send bug reports to [email protected]. Please include a % complete document in each bug report with which we can reproduce the % problem. Patches are, of course, greatly appreciated. % @@ -349,34 +349,19 @@ \ifodd\pageno \advance\hoffset by \bindingoffset \else \advance\hoffset by -\bindingoffset\fi % + \checkchapterpage + % % Retrieve the information for the headings from the marks in the page, % and call Plain TeX's \makeheadline and \makefootline, which use the % values in \headline and \footline. % - % This is used to check if we are on the first page of a chapter. - \ifcase1\the\savedtopmark\fi - \let\prevchaptername\thischaptername - \ifcase0\firstmark\fi - \let\curchaptername\thischaptername - % - \ifodd\pageno \getoddheadingmarks \else \getevenheadingmarks \fi - % - \ifx\curchaptername\prevchaptername - \let\thischapterheading\thischapter - \else - % \thischapterheading is the same as \thischapter except it is blank - % for the first page of a chapter. This is to prevent the chapter name - % being shown twice. - \def\thischapterheading{}% - \fi - % % Common context changes for both heading and footing. % Do this outside of the \shipout so @code etc. will be expanded in % the headline as they should be, not taken literally (outputting ''code). \def\commonheadfootline{\let\hsize=\txipagewidth \texinfochars} % + \ifodd\pageno \getoddheadingmarks \else \getevenheadingmarks \fi \global\setbox\headlinebox = \vbox{\commonheadfootline \makeheadline}% - % \ifodd\pageno \getoddfootingmarks \else \getevenfootingmarks \fi \global\setbox\footlinebox = \vbox{\commonheadfootline \makefootline}% % @@ -423,6 +408,22 @@ \ifr@ggedbottom \kern-\dimen@ \vfil \fi} } +% Check if we are on the first page of a chapter. Used for printing headings. +\newif\ifchapterpage +\def\checkchapterpage{% + % Get the chapter that was current at the end of the last page + \ifcase1\the\savedtopmark\fi + \let\prevchaptername\thischaptername + % + \ifodd\pageno \getoddheadingmarks \else \getevenheadingmarks \fi + \let\curchaptername\thischaptername + % + \ifx\curchaptername\prevchaptername + \chapterpagefalse + \else + \chapterpagetrue + \fi +} % Argument parsing @@ -1010,7 +1011,7 @@ where each line of input produces a line of output.} \let\setfilename=\comment % @bye. -\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend} +\outer\def\bye{\chappager\pagelabels\tracingstats=1\ptexend} \message{pdf,} @@ -1137,6 +1138,45 @@ where each line of input produces a line of output.} \fi +% Output page labels information. +% See PDF reference v.1.7 p.594, section 8.3.1. +\ifpdf +\def\pagelabels{% + \def\title{0 << /P (T-) /S /D >>}% + \edef\roman{\the\romancount << /S /r >>}% + \edef\arabic{\the\arabiccount << /S /D >>}% + % + % Page label ranges must be increasing. Remove any duplicates. + % (There is a slight chance of this being wrong if e.g. there is + % a @contents but no @titlepage, etc.) + % + \ifnum\romancount=0 \def\roman{}\fi + \ifnum\arabiccount=0 \def\title{}% + \else + \ifnum\romancount=\arabiccount \def\roman{}\fi + \fi + % + \ifnum\romancount<\arabiccount + \pdfcatalog{/PageLabels << /Nums [\title \roman \arabic ] >> }\relax + \else + \pdfcatalog{/PageLabels << /Nums [\title \arabic \roman ] >> }\relax + \fi +} +\else + \let\pagelabels\relax +\fi + +\newcount\pagecount \pagecount=0 +\newcount\romancount \romancount=0 +\newcount\arabiccount \arabiccount=0 +\ifpdf + \let\ptxadvancepageno\advancepageno + \def\advancepageno{% + \ptxadvancepageno\global\advance\pagecount by 1 + } +\fi + + % PDF uses PostScript string constants for the names of xref targets, % for display in the outlines, and in other places. Thus, we have to % double any backslashes. Otherwise, a name like "\node" will be @@ -1427,7 +1467,13 @@ output) for that.)} % subentries, which we calculated on our first read of the .toc above. % % We use the node names as the destinations. + % + % Currently we prefix the section name with the section number + % for chapter and appendix headings only in order to avoid too much + % horizontal space being required in the PDF viewer. \def\numchapentry##1##2##3##4{% + \dopdfoutline{##2 ##1}{count-\expnumber{chap##2}}{##3}{##4}}% + \def\unnchapentry##1##2##3##4{% \dopdfoutline{##1}{count-\expnumber{chap##2}}{##3}{##4}}% \def\numsecentry##1##2##3##4{% \dopdfoutline{##1}{count-\expnumber{sec##2}}{##3}{##4}}% @@ -1669,9 +1715,13 @@ output) for that.)} % Therefore, we read toc only once. % % We use node names as destinations. + % + % Currently we prefix the section name with the section number + % for chapter and appendix headings only in order to avoid too much + % horizontal space being required in the PDF viewer. \def\partentry##1##2##3##4{}% ignore parts in the outlines \def\numchapentry##1##2##3##4{% - \dopdfoutline{##1}{1}{##3}{##4}}% + \dopdfoutline{##2 ##1}{1}{##3}{##4}}% \def\numsecentry##1##2##3##4{% \dopdfoutline{##1}{2}{##3}{##4}}% \def\numsubsecentry##1##2##3##4{% @@ -1683,7 +1733,8 @@ output) for that.)} \let\appsecentry\numsecentry% \let\appsubsecentry\numsubsecentry% \let\appsubsubsecentry\numsubsubsecentry% - \let\unnchapentry\numchapentry% + \def\unnchapentry##1##2##3##4{% + \dopdfoutline{##1}{1}{##3}{##4}}% \let\unnsecentry\numsecentry% \let\unnsubsecentry\numsubsecentry% \let\unnsubsubsecentry\numsubsubsecentry% @@ -2496,7 +2547,7 @@ end \def\it{\fam=\itfam \setfontstyle{it}} \def\sl{\fam=\slfam \setfontstyle{sl}} \def\bf{\fam=\bffam \setfontstyle{bf}}\def\bfstylename{bf} -\def\tt{\fam=\ttfam \setfontstyle{tt}} +\def\tt{\fam=\ttfam \setfontstyle{tt}}\def\ttstylename{tt} % Texinfo sort of supports the sans serif font style, which plain TeX does not. % So we set up a \sf. @@ -3101,10 +3152,10 @@ end % Allow a ragged right output to aid breaking long URL's. There can % be a break at the \allowbreak with no extra glue (if the existing stretch in -% the line is sufficent), a break at the \penalty100 with extra glue added +% the line is sufficient), a break at the \penalty100 with extra glue added % at the end of the line, or no break at all here. % Changing the value of the penalty and/or the amount of stretch affects how -% preferrable one choice is over the other. +% preferable one choice is over the other. \def\urefallowbreak{% \allowbreak \hskip 0pt plus 2 em\relax @@ -3509,7 +3560,7 @@ end % @pounds{} is a sterling sign, which Knuth put in the CM italic font. % -\def\pounds{{\it\$}} +\def\pounds{\ifmonospace{\ecfont\char"BF}\else{\it\$}\fi} % @euro{} comes from a separate font, depending on the current style. % We use the free feym* fonts from the eurosym package by Henrik @@ -3658,11 +3709,19 @@ end \fi % Quotes. -\chardef\quotedblleft="5C -\chardef\quotedblright=`\" \chardef\quoteleft=`\` \chardef\quoteright=`\' +% only change font for tt for correct kerning and to avoid using +% \ecfont unless necessary. +\def\quotedblleft{% + \ifmonospace{\ecfont\char"10}\else{\char"5C}\fi +} + +\def\quotedblright{% + \ifmonospace{\ecfont\char"11}\else{\char`\"}\fi +} + \message{page headings,} @@ -3784,12 +3843,19 @@ end \newtoks\evenheadline % headline on even pages \newtoks\oddheadline % headline on odd pages +\newtoks\evenchapheadline% headline on even pages with a new chapter +\newtoks\oddchapheadline % headline on odd pages with a new chapter \newtoks\evenfootline % footline on even pages \newtoks\oddfootline % footline on odd pages % Now make \makeheadline and \makefootline in Plain TeX use those variables -\headline={{\textfonts\rm \ifodd\pageno \the\oddheadline - \else \the\evenheadline \fi}} +\headline={{\textfonts\rm + \ifchapterpage + \ifodd\pageno\the\oddchapheadline\else\the\evenchapheadline\fi + \else + \ifodd\pageno\the\oddheadline\else\the\evenheadline\fi + \fi}} + \footline={{\textfonts\rm \ifodd\pageno \the\oddfootline \else \the\evenfootline \fi}\HEADINGShook} \let\HEADINGShook=\relax @@ -3805,12 +3871,14 @@ end \def\evenheading{\parsearg\evenheadingxxx} \def\evenheadingxxx #1{\evenheadingyyy #1\|\|\|\|\finish} \def\evenheadingyyy #1\|#2\|#3\|#4\finish{% -\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} + \global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}} + \global\evenchapheadline=\evenheadline} \def\oddheading{\parsearg\oddheadingxxx} \def\oddheadingxxx #1{\oddheadingyyy #1\|\|\|\|\finish} \def\oddheadingyyy #1\|#2\|#3\|#4\finish{% -\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} + \global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}% + \global\oddchapheadline=\oddheadline} \parseargdef\everyheading{\oddheadingxxx{#1}\evenheadingxxx{#1}}% @@ -3877,37 +3945,34 @@ end \parseargdef\headings{\csname HEADINGS#1\endcsname} \def\headingsoff{% non-global headings elimination - \evenheadline={\hfil}\evenfootline={\hfil}% - \oddheadline={\hfil}\oddfootline={\hfil}% + \evenheadline={\hfil}\evenfootline={\hfil}\evenchapheadline={\hfil}% + \oddheadline={\hfil}\oddfootline={\hfil}\oddchapheadline={\hfil}% } \def\HEADINGSoff{{\globaldefs=1 \headingsoff}} % global setting \HEADINGSoff % it's the default % When we turn headings on, set the page number to 1. +\def\pageone{ + \global\pageno=1 + \global\arabiccount = \pagecount +} + % For double-sided printing, put current file name in lower left corner, % chapter name on inside top of right hand pages, document % title on inside top of left hand pages, and page numbers on outside top % edge of all pages. \def\HEADINGSdouble{% -\global\pageno=1 -\global\evenfootline={\hfil} -\global\oddfootline={\hfil} -\global\evenheadline={\line{\folio\hfil\thistitle}} -\global\oddheadline={\line{\thischapterheading\hfil\folio}} -\global\let\contentsalignmacro = \chapoddpage +\pageone +\HEADINGSdoublex } \let\contentsalignmacro = \chappager % For single-sided printing, chapter title goes across top left of page, % page number on top right. \def\HEADINGSsingle{% -\global\pageno=1 -\global\evenfootline={\hfil} -\global\oddfootline={\hfil} -\global\evenheadline={\line{\thischapterheading\hfil\folio}} -\global\oddheadline={\line{\thischapterheading\hfil\folio}} -\global\let\contentsalignmacro = \chappager +\pageone +\HEADINGSsinglex } \def\HEADINGSon{\HEADINGSdouble} @@ -3917,7 +3982,9 @@ end \global\evenfootline={\hfil} \global\oddfootline={\hfil} \global\evenheadline={\line{\folio\hfil\thistitle}} -\global\oddheadline={\line{\thischapterheading\hfil\folio}} +\global\oddheadline={\line{\thischapter\hfil\folio}} +\global\evenchapheadline={\line{\folio\hfil}} +\global\oddchapheadline={\line{\hfil\folio}} \global\let\contentsalignmacro = \chapoddpage } @@ -3925,8 +3992,22 @@ end \def\HEADINGSsinglex{% \global\evenfootline={\hfil} \global\oddfootline={\hfil} -\global\evenheadline={\line{\thischapterheading\hfil\folio}} -\global\oddheadline={\line{\thischapterheading\hfil\folio}} +\global\evenheadline={\line{\thischapter\hfil\folio}} +\global\oddheadline={\line{\thischapter\hfil\folio}} +\global\evenchapheadline={\line{\hfil\folio}} +\global\oddchapheadline={\line{\hfil\folio}} +\global\let\contentsalignmacro = \chappager +} + +% for @setchapternewpage off +\def\HEADINGSsinglechapoff{% +\pageone +\global\evenfootline={\hfil} +\global\oddfootline={\hfil} +\global\evenheadline={\line{\thischapter\hfil\folio}} +\global\oddheadline={\line{\thischapter\hfil\folio}} +\global\evenchapheadline=\evenheadline +\global\oddchapheadline=\oddheadline \global\let\contentsalignmacro = \chappager } @@ -4841,7 +4922,7 @@ end % like the previous two, but they put @code around the argument. \def\docodeindex#1{\edef\indexname{#1}\parsearg\docodeindexxxx} -\def\docodeindexxxx #1{\doind{\indexname}{\code{#1}}} +\def\docodeindexxxx #1{\docind{\indexname}{#1}} % Used for the aux, toc and index files to prevent expansion of Texinfo @@ -5117,64 +5198,66 @@ end \let\lbracechar\{% \let\rbracechar\}% % + % + \let\do\indexnofontsdef + % % Non-English letters. - \def\AA{AA}% - \def\AE{AE}% - \def\DH{DZZ}% - \def\L{L}% - \def\OE{OE}% - \def\O{O}% - \def\TH{TH}% - \def\aa{aa}% - \def\ae{ae}% - \def\dh{dzz}% - \def\exclamdown{!}% - \def\l{l}% - \def\oe{oe}% - \def\ordf{a}% - \def\ordm{o}% - \def\o{o}% - \def\questiondown{?}% - \def\ss{ss}% - \def\th{th}% - % - \def\LaTeX{LaTeX}% - \def\TeX{TeX}% - % - % Assorted special characters. \defglyph gives the control sequence a - % definition that removes the {} that follows its use. - \defglyph\atchar{@}% - \defglyph\arrow{->}% - \defglyph\bullet{bullet}% - \defglyph\comma{,}% - \defglyph\copyright{copyright}% - \defglyph\dots{...}% - \defglyph\enddots{...}% - \defglyph\equiv{==}% - \defglyph\error{error}% - \defglyph\euro{euro}% - \defglyph\expansion{==>}% - \defglyph\geq{>=}% - \defglyph\guillemetleft{<<}% - \defglyph\guillemetright{>>}% - \defglyph\guilsinglleft{<}% - \defglyph\guilsinglright{>}% - \defglyph\leq{<=}% - \defglyph\lbracechar{\{}% - \defglyph\minus{-}% - \defglyph\point{.}% - \defglyph\pounds{pounds}% - \defglyph\print{-|}% - \defglyph\quotedblbase{"}% - \defglyph\quotedblleft{"}% - \defglyph\quotedblright{"}% - \defglyph\quoteleft{`}% - \defglyph\quoteright{'}% - \defglyph\quotesinglbase{,}% - \defglyph\rbracechar{\}}% - \defglyph\registeredsymbol{R}% - \defglyph\result{=>}% - \defglyph\textdegree{o}% + \do\AA{AA}% + \do\AE{AE}% + \do\DH{DZZ}% + \do\L{L}% + \do\OE{OE}% + \do\O{O}% + \do\TH{TH}% + \do\aa{aa}% + \do\ae{ae}% + \do\dh{dzz}% + \do\exclamdown{!}% + \do\l{l}% + \do\oe{oe}% + \do\ordf{a}% + \do\ordm{o}% + \do\o{o}% + \do\questiondown{?}% + \do\ss{ss}% + \do\th{th}% + % + \do\LaTeX{LaTeX}% + \do\TeX{TeX}% + % + % Assorted special characters. + \do\atchar{@}% + \do\arrow{->}% + \do\bullet{bullet}% + \do\comma{,}% + \do\copyright{copyright}% + \do\dots{...}% + \do\enddots{...}% + \do\equiv{==}% + \do\error{error}% + \do\euro{euro}% + \do\expansion{==>}% + \do\geq{>=}% + \do\guillemetleft{<<}% + \do\guillemetright{>>}% + \do\guilsinglleft{<}% + \do\guilsinglright{>}% + \do\leq{<=}% + \do\lbracechar{\{}% + \do\minus{-}% + \do\point{.}% + \do\pounds{pounds}% + \do\print{-|}% + \do\quotedblbase{"}% + \do\quotedblleft{"}% + \do\quotedblright{"}% + \do\quoteleft{`}% + \do\quoteright{'}% + \do\quotesinglbase{,}% + \do\rbracechar{\}}% + \do\registeredsymbol{R}% + \do\result{=>}% + \do\textdegree{o}% % % We need to get rid of all macros, leaving only the arguments (if present). % Of course this is not nearly correct, but it is the best we can do for now. @@ -5189,7 +5272,10 @@ end \macrolist \let\value\indexnofontsvalue } -\def\defglyph#1#2{\def#1##1{#2}} % see above + +% Give the control sequence a definition that removes the {} that follows +% its use, e.g. @AA{} -> AA +\def\indexnofontsdef#1#2{\def#1##1{#2}}% @@ -5208,6 +5294,20 @@ end \fi } +% Same as \doind, but for code indices +\def\docind#1#2{% + \iflinks + {% + % + \requireopenindexfile{#1}% + \edef\writeto{\csname#1indfile\endcsname}% + % + \def\indextext{#2}% + \safewhatsit\docindwrite + }% + \fi +} + % Check if an index file has been opened, and if not, open it. \def\requireopenindexfile#1{% \ifnum\csname #1indfile\endcsname=0 @@ -5274,6 +5374,9 @@ end % trim spaces. \edef\trimmed{\segment}% \edef\trimmed{\expandafter\eatspaces\expandafter{\trimmed}}% + \ifincodeindex + \edef\trimmed{\noexpand\code{\trimmed}}% + \fi % \xdef\bracedtext{\bracedtext{\trimmed}}% % @@ -5339,7 +5442,12 @@ end % Write the entry in \indextext to the index file. % -\def\doindwrite{% + +\newif\ifincodeindex +\def\doindwrite{\incodeindexfalse\doindwritex} +\def\docindwrite{\incodeindextrue\doindwritex} + +\def\doindwritex{% \maybemarginindex % \atdummies @@ -5559,7 +5667,11 @@ might help (with 'rm \jobname.?? \jobname.??s')% \else \begindoublecolumns \catcode`\\=0\relax - \catcode`\@=12\relax + % + % Make @ an escape character to give macros a chance to work. This + % should work because we (hopefully) don't otherwise use @ in index files. + %\catcode`\@=12\relax + \catcode`\@=0\relax \input \jobname.\indexname s \enddoublecolumns \fi @@ -6401,18 +6513,16 @@ might help (with 'rm \jobname.?? \jobname.??s')% \def\CHAPPAGoff{% \global\let\contentsalignmacro = \chappager \global\let\pchapsepmacro=\chapbreak -\global\let\pagealignmacro=\chappager} +\global\def\HEADINGSon{\HEADINGSsinglechapoff}} \def\CHAPPAGon{% \global\let\contentsalignmacro = \chappager \global\let\pchapsepmacro=\chappager -\global\let\pagealignmacro=\chappager \global\def\HEADINGSon{\HEADINGSsingle}} \def\CHAPPAGodd{% \global\let\contentsalignmacro = \chapoddpage \global\let\pchapsepmacro=\chapoddpage -\global\let\pagealignmacro=\chapoddpage \global\def\HEADINGSon{\HEADINGSdouble}} \CHAPPAGon @@ -6777,9 +6887,7 @@ might help (with 'rm \jobname.?? \jobname.??s')% % \def\startcontents#1{% % If @setchapternewpage on, and @headings double, the contents should - % start on an odd page, unlike chapters. Thus, we maintain - % \contentsalignmacro in parallel with \pagealignmacro. - % From: Torbjorn Granlund <[email protected]> + % start on an odd page, unlike chapters. \contentsalignmacro \immediate\closeout\tocfile % @@ -6794,6 +6902,9 @@ might help (with 'rm \jobname.?? \jobname.??s')% % % Roman numerals for page numbers. \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi + \def\thistitle{}% no title in double-sided headings + % Record where the Roman numerals started. + \ifnum\romancount=0 \global\romancount=\pagecount \fi } % redefined for the two-volume lispref. We always output on @@ -6816,8 +6927,7 @@ might help (with 'rm \jobname.?? \jobname.??s')% \fi \closein 1 \endgroup - \lastnegativepageno = \pageno - \global\pageno = \savepageno + \contentsendroman } % And just the chapters. @@ -6852,10 +6962,20 @@ might help (with 'rm \jobname.?? \jobname.??s')% \vfill \eject \contentsalignmacro % in case @setchapternewpage odd is in effect \endgroup + \contentsendroman +} +\let\shortcontents = \summarycontents + +% Get ready to use Arabic numerals again +\def\contentsendroman{% \lastnegativepageno = \pageno \global\pageno = \savepageno + % + % If \romancount > \arabiccount, the contents are at the end of the + % document. Otherwise, advance where the Arabic numerals start for + % the page numbers. + \ifnum\romancount>\arabiccount\else\global\arabiccount=\pagecount\fi } -\let\shortcontents = \summarycontents % Typeset the label for a chapter or appendix for the short contents. % The arg is, e.g., `A' for an appendix, or `3' for a chapter. @@ -7444,13 +7564,9 @@ might help (with 'rm \jobname.?? \jobname.??s')% \newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount % % We typeset each line of the verbatim in an \hbox, so we can handle -% tabs. The \global is in case the verbatim line starts with an accent, -% or some other command that starts with a begin-group. Otherwise, the -% entire \verbbox would disappear at the corresponding end-group, before -% it is typeset. Meanwhile, we can't have nested verbatim commands -% (can we?), so the \global won't be overwriting itself. +% tabs. \newbox\verbbox -\def\starttabbox{\global\setbox\verbbox=\hbox\bgroup} +\def\starttabbox{\setbox\verbbox=\hbox\bgroup} % \begingroup \catcode`\^^I=\active @@ -7461,7 +7577,8 @@ might help (with 'rm \jobname.?? \jobname.??s')% \divide\dimen\verbbox by\tabw \multiply\dimen\verbbox by\tabw % compute previous multiple of \tabw \advance\dimen\verbbox by\tabw % advance to next multiple of \tabw - \wd\verbbox=\dimen\verbbox \box\verbbox \starttabbox + \wd\verbbox=\dimen\verbbox + \leavevmode\box\verbbox \starttabbox }% } \endgroup @@ -7471,9 +7588,7 @@ might help (with 'rm \jobname.?? \jobname.??s')% \let\nonarrowing = t% \nonfillstart \tt % easiest (and conventionally used) font for verbatim - % The \leavevmode here is for blank lines. Otherwise, we would - % never \starttabbox and the \egroup would end verbatim mode. - \def\par{\leavevmode\egroup\box\verbbox\endgraf}% + \def\par{\egroup\leavevmode\box\verbbox\endgraf\starttabbox}% \tabexpand \setupmarkupstyle{verbatim}% % Respect line breaks, @@ -7481,7 +7596,6 @@ might help (with 'rm \jobname.?? \jobname.??s')% % make each space count. % Must do in this order: \obeylines \uncatcodespecials \sepspaces - \everypar{\starttabbox}% } % Do the @verb magic: verbatim text is quoted by unique @@ -7516,9 +7630,12 @@ might help (with 'rm \jobname.?? \jobname.??s')% % ignore everything up to the first ^^M, that's the newline at the end % of the @verbatim input line itself. Otherwise we get an extra blank % line in the output. - \xdef\doverbatim#1^^M#2@end verbatim{#2\noexpand\end\gobble verbatim}% + \xdef\doverbatim#1^^M#2@end verbatim{% + \starttabbox#2\egroup\noexpand\end\gobble verbatim}% % We really want {...\end verbatim} in the body of the macro, but % without the active space; thus we have to use \xdef and \gobble. + % The \egroup ends the \verbbox started at the end of the last line in + % the block. \endgroup % \envdef\verbatim{% @@ -7540,7 +7657,7 @@ might help (with 'rm \jobname.?? \jobname.??s')% \wlog{texinfo.tex: doing @verbatiminclude of #1^^J}% \edef\tmp{\noexpand\input #1 } \expandafter - }\tmp + }\expandafter\starttabbox\tmp\egroup \afterenvbreak }% } @@ -10706,6 +10823,8 @@ directory should work if nowhere else does.} \DeclareUnicodeCharacter{0233}{\=y}% \DeclareUnicodeCharacter{0237}{\dotless{j}}% % + \DeclareUnicodeCharacter{02BC}{'}% + % \DeclareUnicodeCharacter{02DB}{\ogonek{ }}% % % Greek letters upper case diff --git a/lib/update-copyright b/lib/update-copyright index 4f79b56be..d9b7f683a 100755 --- a/lib/update-copyright +++ b/lib/update-copyright @@ -133,11 +133,11 @@ # are valid code in both sh and perl. When executed by sh, they re-execute # the script through the perl program found in $PATH. The '-x' option # is essential as well; without it, perl would re-execute the script -# through /bin/sh. When executed by perl, the next two lines are a no-op. +# through /bin/sh. When executed by perl, the next two lines are a no-op. eval 'exec perl -wSx -0777 -pi "$0" "$@"' if 0; -my $VERSION = '2018-03-07.03:47'; # UTC +my $VERSION = '2020-04-04.15:07'; # UTC # The definition above must lie within the first 8 lines in order # for the Emacs time-stamp write hook (at end) to update it. # If you change this file with Emacs, please let the write hook -- 2.28.0